Empire Nexfire EF39 is a 39-inch built-in traditional electric fireplace with a brick-look interior and electric flame effect. It requires no gas connection or combustion vent.
Built-in installation with voltage-specific heating configurations; the installation guide also supports a separate 120-volt no-heat arrangement.
Refractory brick-look interior.
The appliance is factory wired for 208/240 V. A qualified electrician must configure the wiring and voltage selector correctly for the installation’s supply; selecting 120 V requires the manufacturer’s prescribed reconfiguration. Heating installations require a dedicated, properly fused 15-amp circuit. The manual also documents a separate 120 V no-heat installation.
Remote control and wall thermostat are optional, not standard included equipment.
| Supply configuration | Rated power | Current draw |
|---|---|---|
| 120 V with heat | 1,440 W | 12.0 A |
| 208 V with heat | 2,100 W | 10.10 A |
| 240 V with heat | 2,700 W | 11.25 A |
Follow the exact rough-in dimensions and mounting-flange instructions. Keep the bottom-front air intake slots unobstructed. No combustible material may rest on the top surface; maintain the manual’s 2-inch separation from insulation and vapor barrier above the unit. No gas connection or combustion vent is used.
EF39 installation guide 7206350600R01, pages 3–5, identifies electrical configurations, included versus optional equipment, framing precautions and voltage selection. Installation and service must follow the complete manufacturer documentation and applicable codes.
Request a return within 30 calendar days after delivery for eligible new, unused, unassembled and uninstalled items in original packaging. Written authorization is required. Read the Returns Policy for conditions, fees and exclusions.
Most in-stock items are released for shipment within 1–2 business days after payment and order review. Carrier transit is additional. Parcel transit commonly takes 3–7 business days; freight commonly takes 5–10 business days after shipment. Special-order and backordered items may take longer. Shipping details, exclusions and damage reporting.
Empire Nexfire EF39 is a 39-inch built-in traditional electric fireplace with a brick-look interior and electric flame effect. It requires no gas connection or combustion vent.
Built-in installation with voltage-specific heating configurations; the installation guide also supports a separate 120-volt no-heat arrangement.
Refractory brick-look interior.
The appliance is factory wired for 208/240 V. A qualified electrician must configure the wiring and voltage selector correctly for the installation’s supply; selecting 120 V requires the manufacturer’s prescribed reconfiguration. Heating installations require a dedicated, properly fused 15-amp circuit. The manual also documents a separate 120 V no-heat installation.
Remote control and wall thermostat are optional, not standard included equipment.
| Supply configuration | Rated power | Current draw |
|---|---|---|
| 120 V with heat | 1,440 W | 12.0 A |
| 208 V with heat | 2,100 W | 10.10 A |
| 240 V with heat | 2,700 W | 11.25 A |
Follow the exact rough-in dimensions and mounting-flange instructions. Keep the bottom-front air intake slots unobstructed. No combustible material may rest on the top surface; maintain the manual’s 2-inch separation from insulation and vapor barrier above the unit. No gas connection or combustion vent is used.
EF39 installation guide 7206350600R01, pages 3–5, identifies electrical configurations, included versus optional equipment, framing precautions and voltage selection. Installation and service must follow the complete manufacturer documentation and applicable codes.
