Empire DVCT50CBP95 is a 50-inch single-sided clean-face direct-vent gas fireplace with TruFlame dual-burner technology. Choose the exact factory natural-gas or propane model and model-matched interior components.
Ceramic glass and a traditional log-fire presentation. The multifunction control operates variable flame height, independent rear-burner switching and accent-light dimming as described in the model’s owner instructions.
Fine-mesh protective barrier, noncombustible board and multifunction remote control. Install the required protective components before operation.
DVCT50CBP95 requires a compatible liner and log set purchased and installed before operation. The 50-inch model specifies LS50TINF logs and a DVP50P-series liner. Optional decorative fronts, frames and insets do not replace those required internal components. A decorative inset requires its compatible front assembly.
Decorative frames, fronts, andirons and compatible insets are optional. An inset requires its matching front; it does not replace required logs or liner.
FBB21 automatic variable-speed twin blower is optional. Its compatible remote control function does not mean a blower is included.
| Model | DVCT50CBP95 |
|---|---|
| Location | Indoor |
| Configuration | Single-sided |
| Ignition | Intermittent pilot |
| Appliance width × height × depth | 56 × 48-11/16 × 24-1/2 inches; height excludes standoffs |
| Maximum input, both burners; natural gas / propane | 56,500 / 55,000 BTU/h |
| Minimum input, both burners; natural gas / propane | 38,000 / 44,000 BTU/h |
| Minimum input, front burner only; natural gas / propane | 16,500 / 19,000 BTU/h |
| Gas inlet | 1/2-inch NPT |
| Venting | 5 × 8 direct vent, top outlet |
The appliance uses an approved 5 × 8 direct-vent system to draw combustion air from outside and discharge exhaust outdoors. Vent route, termination, framing, clearances and any conversion-kit selection must follow the exact model manual. The dimensions above describe the appliance and are not rough-opening dimensions.
Manufacturer installation manual for DVCT50CBP95, page 8, provides these fuel-specific input ratings, dimensions and component requirements. Installation and service must follow the complete manufacturer documentation and applicable codes.
Request a return within 30 calendar days after delivery for eligible new, unused, unassembled and uninstalled items in original packaging. Written authorization is required. Read the Returns Policy for conditions, fees and exclusions.
Most in-stock items are released for shipment within 1–2 business days after payment and order review. Carrier transit is additional. Parcel transit commonly takes 3–7 business days; freight commonly takes 5–10 business days after shipment. Special-order and backordered items may take longer. Shipping details, exclusions and damage reporting.
Empire DVCT50CBP95 is a 50-inch single-sided clean-face direct-vent gas fireplace with TruFlame dual-burner technology. Choose the exact factory natural-gas or propane model and model-matched interior components.
Ceramic glass and a traditional log-fire presentation. The multifunction control operates variable flame height, independent rear-burner switching and accent-light dimming as described in the model’s owner instructions.
Fine-mesh protective barrier, noncombustible board and multifunction remote control. Install the required protective components before operation.
DVCT50CBP95 requires a compatible liner and log set purchased and installed before operation. The 50-inch model specifies LS50TINF logs and a DVP50P-series liner. Optional decorative fronts, frames and insets do not replace those required internal components. A decorative inset requires its compatible front assembly.
Decorative frames, fronts, andirons and compatible insets are optional. An inset requires its matching front; it does not replace required logs or liner.
FBB21 automatic variable-speed twin blower is optional. Its compatible remote control function does not mean a blower is included.
| Model | DVCT50CBP95 |
|---|---|
| Location | Indoor |
| Configuration | Single-sided |
| Ignition | Intermittent pilot |
| Appliance width × height × depth | 56 × 48-11/16 × 24-1/2 inches; height excludes standoffs |
| Maximum input, both burners; natural gas / propane | 56,500 / 55,000 BTU/h |
| Minimum input, both burners; natural gas / propane | 38,000 / 44,000 BTU/h |
| Minimum input, front burner only; natural gas / propane | 16,500 / 19,000 BTU/h |
| Gas inlet | 1/2-inch NPT |
| Venting | 5 × 8 direct vent, top outlet |
The appliance uses an approved 5 × 8 direct-vent system to draw combustion air from outside and discharge exhaust outdoors. Vent route, termination, framing, clearances and any conversion-kit selection must follow the exact model manual. The dimensions above describe the appliance and are not rough-opening dimensions.
Manufacturer installation manual for DVCT50CBP95, page 8, provides these fuel-specific input ratings, dimensions and component requirements. Installation and service must follow the complete manufacturer documentation and applicable codes.
