The Napoleon TLV50LN is a 50-inch Tall Linear Vector gas fireplace with Luminous Log technology and a single-sided viewing configuration. This indoor built-in model uses natural gas and electronic ignition. Choose a separately sold model-specific Luminous burner/log kit to complete the appliance. Product photography shows a configured fireplace with separately selected logs.
Natural gas with electronic ignition. Choose one compatible Luminous Log Burner Kit. The ProFlame II remote and eFIRE control are included; Controls offers the optional W660-0160 wall control. Reflective panels are included. The DHCP-BK blower must be paired with either DHCP-EK or DHCP-HK. Do not combine LHAD with Dynamic Heat Control Linear or ducted heat management.
Use an approved top 5-inch exhaust / 8-inch intake vent system. Horizontal natural-draft installations use a round-wall or Silhouette terminal. Add all pipe, firestops, supports and roof-pitch components required by the exact manual and installation route; a terminal alone is not a complete system. Power venting uses GPV together with PVALX3; order both. Any propane conversion needs an approved rigid or power-vent route. Venting selections remain optional for ordering.
Natural gas base appliance, electronic ignition, remote and eFIRE controller, battery-backup control equipment, top accent lighting, MIRRO-FLAME porcelain reflective radiant panels, stainless steel flex connector and firestop/vent shield. The selected Luminous burner/log kit and installation-specific venting are purchased separately.
Choose one 50-inch Luminous kit: BLKTLV50L birch, DLKTLV50L driftwood or OLKTLV50L oak. The manufacturer lists these as mandatory alternatives; do not substitute a non-L kit. Each listed kit supplies its specified logs, rocks, glowing embers, charcoal, shale, glass and vermiculite. A complete approved top direct-vent system with 5-inch exhaust and 8-inch air intake, approved termination, gas supply and electrical installation are also necessary. Follow the exact installation manual and the selected log kit's placement leaflet.
FTTLV50 four-sided black finishing trim and W660-0160 wall control are optional. Listed heat-management choices include LHAD, Dynamic Heat Control Linear DHCL1, Dynamic Heat Control Plus and Ducted Heat Management. Do not combine the mutually exclusive LHAD, DHC Linear and Ducted Heat Management arrangements. Dynamic Heat Control Plus requires its blower kit together with the appropriate exterior or hot-air-grille kit. Optional propane conversion uses W175-0862 and requires rigid or approved power venting. This listing remains the natural gas model.
| Manufacturer | Napoleon |
|---|---|
| SKU / MPN | TLV50LN |
| Series / nominal size | Tall Linear Vector with Luminous Logs / 50 inches |
| Fuel | Natural gas |
| Location | Indoor |
| Installation / configuration | Built-in / single-sided |
| Ignition | Electronic |
| Venting | Top direct vent, 5-inch exhaust / 8-inch intake |
| Shipping weight | 525 lb |
Installation and servicing must be performed by a qualified professional following the exact manufacturer installation manual and applicable codes. Do not use nominal size or viewing dimensions as framing dimensions. Maintain the specified enclosure ventilation, clearances and approved vent arrangement. Keep furniture and other combustible materials clear of the hot glass. Do not operate with damaged or removed fixed glass, substitute burner media, burn solid fuel or obstruct burner ports. Follow the model-specific log-placement instructions. Arrange periodic cleaning and annual professional inspection. Turn off gas and power and allow the appliance to cool before servicing.
Napoleon's President's Lifetime Limited Warranty applies to the original purchaser under its authorized-dealer, installation and maintenance conditions. Eligible lifetime components have repair or replacement coverage during the first ten years and the stated reduced-price replacement terms thereafter. Electrical and wearable components and eligible repair labor have first-year coverage. Consult the owner's manual for covered parts, exclusions and claim requirements.
Request a return within 30 calendar days after delivery for eligible new, unused, unassembled and uninstalled items in original packaging. Written authorization is required. Read the Returns Policy for conditions, fees and exclusions.
Most in-stock items are released for shipment within 1–2 business days after payment and order review. Carrier transit is additional. Parcel transit commonly takes 3–7 business days; freight commonly takes 5–10 business days after shipment. Special-order and backordered items may take longer. Shipping details, exclusions and damage reporting.
The Napoleon TLV50LN is a 50-inch Tall Linear Vector gas fireplace with Luminous Log technology and a single-sided viewing configuration. This indoor built-in model uses natural gas and electronic ignition. Choose a separately sold model-specific Luminous burner/log kit to complete the appliance. Product photography shows a configured fireplace with separately selected logs.
Natural gas with electronic ignition. Choose one compatible Luminous Log Burner Kit. The ProFlame II remote and eFIRE control are included; Controls offers the optional W660-0160 wall control. Reflective panels are included. The DHCP-BK blower must be paired with either DHCP-EK or DHCP-HK. Do not combine LHAD with Dynamic Heat Control Linear or ducted heat management.
Use an approved top 5-inch exhaust / 8-inch intake vent system. Horizontal natural-draft installations use a round-wall or Silhouette terminal. Add all pipe, firestops, supports and roof-pitch components required by the exact manual and installation route; a terminal alone is not a complete system. Power venting uses GPV together with PVALX3; order both. Any propane conversion needs an approved rigid or power-vent route. Venting selections remain optional for ordering.
Natural gas base appliance, electronic ignition, remote and eFIRE controller, battery-backup control equipment, top accent lighting, MIRRO-FLAME porcelain reflective radiant panels, stainless steel flex connector and firestop/vent shield. The selected Luminous burner/log kit and installation-specific venting are purchased separately.
Choose one 50-inch Luminous kit: BLKTLV50L birch, DLKTLV50L driftwood or OLKTLV50L oak. The manufacturer lists these as mandatory alternatives; do not substitute a non-L kit. Each listed kit supplies its specified logs, rocks, glowing embers, charcoal, shale, glass and vermiculite. A complete approved top direct-vent system with 5-inch exhaust and 8-inch air intake, approved termination, gas supply and electrical installation are also necessary. Follow the exact installation manual and the selected log kit's placement leaflet.
FTTLV50 four-sided black finishing trim and W660-0160 wall control are optional. Listed heat-management choices include LHAD, Dynamic Heat Control Linear DHCL1, Dynamic Heat Control Plus and Ducted Heat Management. Do not combine the mutually exclusive LHAD, DHC Linear and Ducted Heat Management arrangements. Dynamic Heat Control Plus requires its blower kit together with the appropriate exterior or hot-air-grille kit. Optional propane conversion uses W175-0862 and requires rigid or approved power venting. This listing remains the natural gas model.
| Manufacturer | Napoleon |
|---|---|
| SKU / MPN | TLV50LN |
| Series / nominal size | Tall Linear Vector with Luminous Logs / 50 inches |
| Fuel | Natural gas |
| Location | Indoor |
| Installation / configuration | Built-in / single-sided |
| Ignition | Electronic |
| Venting | Top direct vent, 5-inch exhaust / 8-inch intake |
| Shipping weight | 525 lb |
Installation and servicing must be performed by a qualified professional following the exact manufacturer installation manual and applicable codes. Do not use nominal size or viewing dimensions as framing dimensions. Maintain the specified enclosure ventilation, clearances and approved vent arrangement. Keep furniture and other combustible materials clear of the hot glass. Do not operate with damaged or removed fixed glass, substitute burner media, burn solid fuel or obstruct burner ports. Follow the model-specific log-placement instructions. Arrange periodic cleaning and annual professional inspection. Turn off gas and power and allow the appliance to cool before servicing.
Napoleon's President's Lifetime Limited Warranty applies to the original purchaser under its authorized-dealer, installation and maintenance conditions. Eligible lifetime components have repair or replacement coverage during the first ten years and the stated reduced-price replacement terms thereafter. Electrical and wearable components and eligible repair labor have first-year coverage. Consult the owner's manual for covered parts, exclusions and claim requirements.
