HL38VOLE is an outdoor-only, single-sided gas fireplace with a linear contemporary burner and Honeywell hot-surface electronic ignition. The exact propane model is rated at 34,000 BTU/hr. Its ventless outdoor design must not be confused with an indoor vent-free appliance: it is not permitted in a home, camper, tent or another enclosed space.
| Manufacturer / model | Montigo HL38VOLE |
|---|---|
| Fuel | Propane |
| Gas input rating | 34,000 BTU/hr |
| Burner | Linear contemporary |
| Ignition | Honeywell hot-surface electronic ignition |
| Application | Outdoor residential fireplace; not for enclosed indoor use |
| Chimney / vent pipe | Not applicable to this outdoor ventless model |
| Minimum inlet gas pressure | 11 inches water column |
| Manifold gas pressure | 10 inches water column |
This is the HL38VO linear-burner configuration, distinct from the traditional H38VO log-burner model. Approved firestones or cultured rocks must stay around the burner, not on top of it. Follow the linear media placement illustrated on page 15. The exact burner type, ignition and fuel are determined by this model number; do not substitute a similar-looking sibling product.
For a covered patio or deck, the manual requires at least two sides to remain open. Choose a location with adequate ventilation and all specified clearances. The manual prohibits recessing the unit into the exterior wall. Plan drainage for the enclosure so water cannot accumulate beneath the appliance. The OD38123 drain pan is an optional model-specific accessory; when it is not used, provide another compliant route for water to escape to the exterior.
Use the exact H(L)38VO diagrams in the manufacturer manual for appliance dimensions, framing and screen projection. The screen projects 2 3/8 inches from the fireplace face. Do not treat screen dimensions, firebox dimensions and framing dimensions as interchangeable. All fireplace facing must be noncombustible, and the lower gas-control panel must remain unobstructed for air supply and service. The clearance table specifies 1 inch at the sides and back, with a separate zero-clearance allowance to the insulation jacket; use the complete diagram to identify the applicable surface. Maintain the specified shelf, mantel, ceiling and sidewall clearances, including the 36-inch ceiling clearance above the fireplace stated in the installation instructions.
Provide an accessible approved gas shutoff and have a qualified installer verify supply pressure and leak-test the installation. A fuel change requires the appropriate Montigo conversion kit and a qualified service technician. Protect the electronic-control power connection from weather. The manufacturer requires the RPOVO electrical connection to be in a watertight box or a dry location; outdoor electrical installation must include ground-fault protection as required by local code.
Have the appliance inspected before use and at least annually by a qualified professional. Keep burners, control compartments and air passages clear. Allow the fireplace to cool before cleaning or service, and reinstall protective components after service.
Divine Outdoor H34VO, H38VO, HL38VO and H42VO installation and maintenance manual: exact model ratings on page 3, dimensions on page 5, framing and drainage on pages 6–7, clearances and finishing on page 8, wiring on page 9, gas requirements on page 10, and model-specific media on pages 12–15. Installation must follow the full manual and applicable codes. Consult Montigo's current document index and the warranty applicable to the supplied appliance.
Request a return within 30 calendar days after delivery for eligible new, unused, unassembled and uninstalled items in original packaging. Written authorization is required. Read the Returns Policy for conditions, fees and exclusions.
Most in-stock items are released for shipment within 1–2 business days after payment and order review. Carrier transit is additional. Parcel transit commonly takes 3–7 business days; freight commonly takes 5–10 business days after shipment. Special-order and backordered items may take longer. Shipping details, exclusions and damage reporting.
HL38VOLE is an outdoor-only, single-sided gas fireplace with a linear contemporary burner and Honeywell hot-surface electronic ignition. The exact propane model is rated at 34,000 BTU/hr. Its ventless outdoor design must not be confused with an indoor vent-free appliance: it is not permitted in a home, camper, tent or another enclosed space.
| Manufacturer / model | Montigo HL38VOLE |
|---|---|
| Fuel | Propane |
| Gas input rating | 34,000 BTU/hr |
| Burner | Linear contemporary |
| Ignition | Honeywell hot-surface electronic ignition |
| Application | Outdoor residential fireplace; not for enclosed indoor use |
| Chimney / vent pipe | Not applicable to this outdoor ventless model |
| Minimum inlet gas pressure | 11 inches water column |
| Manifold gas pressure | 10 inches water column |
This is the HL38VO linear-burner configuration, distinct from the traditional H38VO log-burner model. Approved firestones or cultured rocks must stay around the burner, not on top of it. Follow the linear media placement illustrated on page 15. The exact burner type, ignition and fuel are determined by this model number; do not substitute a similar-looking sibling product.
For a covered patio or deck, the manual requires at least two sides to remain open. Choose a location with adequate ventilation and all specified clearances. The manual prohibits recessing the unit into the exterior wall. Plan drainage for the enclosure so water cannot accumulate beneath the appliance. The OD38123 drain pan is an optional model-specific accessory; when it is not used, provide another compliant route for water to escape to the exterior.
Use the exact H(L)38VO diagrams in the manufacturer manual for appliance dimensions, framing and screen projection. The screen projects 2 3/8 inches from the fireplace face. Do not treat screen dimensions, firebox dimensions and framing dimensions as interchangeable. All fireplace facing must be noncombustible, and the lower gas-control panel must remain unobstructed for air supply and service. The clearance table specifies 1 inch at the sides and back, with a separate zero-clearance allowance to the insulation jacket; use the complete diagram to identify the applicable surface. Maintain the specified shelf, mantel, ceiling and sidewall clearances, including the 36-inch ceiling clearance above the fireplace stated in the installation instructions.
Provide an accessible approved gas shutoff and have a qualified installer verify supply pressure and leak-test the installation. A fuel change requires the appropriate Montigo conversion kit and a qualified service technician. Protect the electronic-control power connection from weather. The manufacturer requires the RPOVO electrical connection to be in a watertight box or a dry location; outdoor electrical installation must include ground-fault protection as required by local code.
Have the appliance inspected before use and at least annually by a qualified professional. Keep burners, control compartments and air passages clear. Allow the fireplace to cool before cleaning or service, and reinstall protective components after service.
Divine Outdoor H34VO, H38VO, HL38VO and H42VO installation and maintenance manual: exact model ratings on page 3, dimensions on page 5, framing and drainage on pages 6–7, clearances and finishing on page 8, wiring on page 9, gas requirements on page 10, and model-specific media on pages 12–15. Installation must follow the full manual and applicable codes. Consult Montigo's current document index and the warranty applicable to the supplied appliance.
