With its grand scale, classic masonry appeal, and an open-hearth viewing area like no other, the Biltmore adds charm and distinction to your home. Gas log sets are also available to add to this open fireplace, offering an alternative option to enjoy the boldness of an open flame with the convenience of gas. Note: 50” not available in Canada.
Listed for the United States and Canada when installed with the specified country-specific chimney system
U.S. uses SL1100 series chimney. Canada uses SL400 series chimney and requires SLA-10
| Model | Biltmore 36 |
|---|---|
| Unit Width | 44-1/2" |
| Unit Depth | 27-1/2" |
| Unit Height | 59-1/4" |
| Framing Width | 45-1/2" |
| Framing Depth | 28" |
| Framing Height | 59-3/4" |
| |
|
| Viewing Area | 36 x 28-1/2" |
This open-hearth wood-burning fireplace includes the firescreen, grate, outside-air inlet hood and attic insulation shield. It ships without the required refractory set. Select one complete WDR2836 set in the listed traditional (T) or herringbone (H) pattern and Natural Gray (NG), Black Onyx (BK) or Masonry Brown (BR) finish. Individual loose panels do not replace the requirement for a complete matched set.
A compliant hearth extension, outside-air flex duct, approved chimney and termination, and noncombustible finish materials are required separately. The United States installation uses the listed SL1100 chimney system. The Canadian configuration uses the specified SL400 system with SLA10 adapter and required chimney air kit. Follow the exact country-specific component schedule; do not interchange chimney families or treat an optional decorative cap cover as the required termination.
| Framing opening | 45-1/2 inches wide × 59-3/4 inches high × 28 inches deep; allow additional space for outside-air connection and chase finishing |
|---|---|
| Appliance weight | 356 lb; not a verified packaged shipping weight |
| Appliance side/back air clearance | 1 inch minimum, subject to the nailing-flange detail |
| Chimney air clearance | 2 inches minimum |
| Adjacent combustible sidewall | 24 inches from opening |
| Combustible mantel | Up to 12 inches deep, at least 12 inches above the opening; follow trim and finishing diagrams |
| Minimum ceiling | 7 feet from appliance base |
Overall chimney height is measured from the fireplace base. Minimum straight height is 18 feet; one offset/return requires at least 18.5 feet and two pairs at least 24 feet. Maximum overall height is 90 feet, with no more than two offset/return pairs and no more than 20 feet of chimney between an offset and return. Supports, firestops, shields, roof flashing and termination must follow the actual route and manufacturer drawings.
Plan the hearth before framing. Raised, flush and platform installations have different construction details. Keep required air spaces clear of insulation, preserve the fireplace opening, and seal the specified facing joints with noncombustible material. Use the full installation manual to determine the hearth dimensions and thermal protection for the selected arrangement. Installation must follow manufacturer documentation and applicable codes.
Approved model-specific glass doors and separately installed compatible gas appliances are optional. They do not remove the requirement for the refractory, hearth or chimney. A gas-log installation must follow both the fireplace and gas-appliance instructions; the manual contains additional conditions for vented and unvented appliances, and the chimney must not be removed.
For wood operation, use the supplied grate, installed refractory, closed firescreen and fully open damper. Optional glass doors must be fully open or fully closed, never partly open. Follow the owner manual for fuel, chimney inspection, creosote removal and maintenance. Warranty coverage is component-specific and subject to the HHT schedule, authorized purchase, correct installation and maintenance conditions.
Request a return within 30 calendar days after delivery for eligible new, unused, unassembled and uninstalled items in original packaging. Written authorization is required. Read the Returns Policy for conditions, fees and exclusions.
Most in-stock items are released for shipment within 1–2 business days after payment and order review. Carrier transit is additional. Parcel transit commonly takes 3–7 business days; freight commonly takes 5–10 business days after shipment. Special-order and backordered items may take longer. Shipping details, exclusions and damage reporting.
With its grand scale, classic masonry appeal, and an open-hearth viewing area like no other, the Biltmore adds charm and distinction to your home. Gas log sets are also available to add to this open fireplace, offering an alternative option to enjoy the boldness of an open flame with the convenience of gas. Note: 50” not available in Canada.
Listed for the United States and Canada when installed with the specified country-specific chimney system
U.S. uses SL1100 series chimney. Canada uses SL400 series chimney and requires SLA-10
| Model | Biltmore 36 |
|---|---|
| Unit Width | 44-1/2" |
| Unit Depth | 27-1/2" |
| Unit Height | 59-1/4" |
| Framing Width | 45-1/2" |
| Framing Depth | 28" |
| Framing Height | 59-3/4" |
| |
|
| Viewing Area | 36 x 28-1/2" |
This open-hearth wood-burning fireplace includes the firescreen, grate, outside-air inlet hood and attic insulation shield. It ships without the required refractory set. Select one complete WDR2836 set in the listed traditional (T) or herringbone (H) pattern and Natural Gray (NG), Black Onyx (BK) or Masonry Brown (BR) finish. Individual loose panels do not replace the requirement for a complete matched set.
A compliant hearth extension, outside-air flex duct, approved chimney and termination, and noncombustible finish materials are required separately. The United States installation uses the listed SL1100 chimney system. The Canadian configuration uses the specified SL400 system with SLA10 adapter and required chimney air kit. Follow the exact country-specific component schedule; do not interchange chimney families or treat an optional decorative cap cover as the required termination.
| Framing opening | 45-1/2 inches wide × 59-3/4 inches high × 28 inches deep; allow additional space for outside-air connection and chase finishing |
|---|---|
| Appliance weight | 356 lb; not a verified packaged shipping weight |
| Appliance side/back air clearance | 1 inch minimum, subject to the nailing-flange detail |
| Chimney air clearance | 2 inches minimum |
| Adjacent combustible sidewall | 24 inches from opening |
| Combustible mantel | Up to 12 inches deep, at least 12 inches above the opening; follow trim and finishing diagrams |
| Minimum ceiling | 7 feet from appliance base |
Overall chimney height is measured from the fireplace base. Minimum straight height is 18 feet; one offset/return requires at least 18.5 feet and two pairs at least 24 feet. Maximum overall height is 90 feet, with no more than two offset/return pairs and no more than 20 feet of chimney between an offset and return. Supports, firestops, shields, roof flashing and termination must follow the actual route and manufacturer drawings.
Plan the hearth before framing. Raised, flush and platform installations have different construction details. Keep required air spaces clear of insulation, preserve the fireplace opening, and seal the specified facing joints with noncombustible material. Use the full installation manual to determine the hearth dimensions and thermal protection for the selected arrangement. Installation must follow manufacturer documentation and applicable codes.
Approved model-specific glass doors and separately installed compatible gas appliances are optional. They do not remove the requirement for the refractory, hearth or chimney. A gas-log installation must follow both the fireplace and gas-appliance instructions; the manual contains additional conditions for vented and unvented appliances, and the chimney must not be removed.
For wood operation, use the supplied grate, installed refractory, closed firescreen and fully open damper. Optional glass doors must be fully open or fully closed, never partly open. Follow the owner manual for fuel, chimney inspection, creosote removal and maintenance. Warranty coverage is component-specific and subject to the HHT schedule, authorized purchase, correct installation and maintenance conditions.
