Description

Product overview

Majestic MER36P is a 36-inch Meridian Platinum indoor direct-vent gas fireplace. Six ceramic-fiber logs and glowing embers create the traditional display.

Key features

  • Sealed direct-vent combustion system.
  • IntelliFire Touch intermittent-pilot ignition with emergency battery backup.
  • Model-specific interior and heat-management choices.

Included components

Included: six ceramic-fiber logs, glowing ember display and ceramic glass, IFT-RC400 touchscreen remote, variable-speed fan, LED illuminated embers, accent lighting and gas flex connector.

Required components

A model-compatible decorative barrier front, approved vent system, appropriate gas connection and electrical supply are required. Operate only with the fixed glass and barrier installed.

Optional accessories

Compatible interior panels and heat-management equipment are optional. Wi-Fi control remains optional; the touchscreen remote, fan and lighting are already included. Accent lighting is not used with a black-glass liner.

Specifications

Model / MPNMER36P
Natural-gas input22,000–40,000 BTU/hr
Propane input21,000–40,000 BTU/hr
Appliance dimensions (W × H × D)41 × 40-7/8 × 21-7/16 inches
Minimum rough opening (W × H × D)42 × 40-1/8 × 22 inches; adjust for chase sheathing; rear venting with one 90-degree elbow adds 12 inches to depth
Viewing area (W × H)34-1/4 × 24-3/4 inches
Appliance weight160 pounds; packaged shipping weight is not stated here
GlassCeramic
VentingTop or rear vent; use the exact approved DVP/SLP configuration in the installation manual

Installation and safety notes

This is supplemental room heat, not a primary whole-home heating system. Plan the vent route, approved termination, gas connection, electrical supply and required barrier before ordering. Minimum side and rear clearance is 1/2 inch; keep 36 inches clear in front. Mantel, ceiling, finishing-material and optional heat-management clearances depend on the exact installation; use the manual diagrams. Installation and service must follow manufacturer documentation and applicable codes.

Warranty summary

Hearth & Home Technologies provides a component-specific limited warranty subject to its conditions, exclusions and coverage periods. Review the current owner manual warranty rather than assuming every component has lifetime coverage.

Exact-model manuals and downloads

Specifications

SKU: MER36P

Majestic

Majestic Products 36" Meridian Platinum Direct Vent Gas Fireplace MER36P / Electronic Ignition

Write a Review
Expert Help Available (844) 545-7995
SKU: MER36P
$4,999.00
BUY WITH CONFIDENCE Fireplace expertise from selection to delivery.
✓
Shipping & Delivery Most in-stock items are released for shipment within 1–2 business days after payment and order review. Carrier transit is additional.
✓
Free Shipping on Orders $300+ — Review Shipping Policy Eligible merchandise subtotal after discounts/promotional adjustments. Exclusions apply.
✓
Best Price Guarantee Eligible identical products from authorized U.S. retailers; compare total delivered price before tax. Request before purchase or within 7 calendar days after purchase.
✓
Contractor Pricing Trade professionals can contact us for project and volume pricing.
✓
30-Day Returns Request a return within 30 days for eligible new, unused, uninstalled items. Authorization and exclusions apply.
✓
Fireplace Experts Need help choosing? Talk to an expert before you order.
CONFIGURE YOUR FIREPLACE

Build Your Fireplace

Complete the required selections first, then add only the compatible options your fireplace and installation need.

1 Required selections
2 Customize options
3 Review & order
Expert Help (844) 545-7995

Fireplace

Complete the required product selections for this fireplace.

Required
  • HHT Black Essence inside fit front ESSENCE36BK
  • HHT Black Essence inside fit front with ClearVue mesh ESSENCECV36BK
  • HHT Black Ventura overlap front VENTURA36BK
  • HHT New Bronze Ventura overlap front VENTURA36NB
  • HHT Black Manor arched overlap fit front MANOR36BK
  • HHT New Bronze Manor arched overlap fit front MANOR36NB
  • HHT Gun Metal Ensemble overlap front ENSEMBLE36GM
  • HHT New Bronze Ensemble overlap front ENSEMBLE36NB
  • HHT Tavern Brown Herringbone Brick Interior Panels BRICK36MPLTBH
  • HHT Castle Stone Brick Interior Panels BRICK36MPLCS
  • HHT 2 sided reflective black glass liner GL-36MX
  • HHT Fan kit 160 CFM (fan only) GFK-160C
  • HHT Fan kit 160 CFM (includes rheostat and temperature sensor) GFK-160A
  • HHT Passive Heat trim kit for side discharge PH-SIDETRIM
  • HHT Passive Heat Vent Trim Kit For Front Discharge PH-FRTTRIM-36
  • HHT Passive Heat Kit starting collars PH-MR
  • HHT Heat out kit HEAT-OUT-GAS
  • HHT Required adaptor for HEAT-ZONE-GAS when not being paired with Passive Heat HZMR-ADP
  • HHT Heat-Zone Kit includes fan HEAT-ZONE-GAS
  • HHT Battery backup wall switch kit BATTERY-WSK
  • HHT IntelliFire Wi-Fi Module IFT-WFM
  • HHT IntelliFire Touch AUX Module IFT-ACM
  • HHT IntelliFire Touch white wireless wall switch IFT-RC150
  • HHT IntelliFire Touch black remote control IFT-RC400
  • HHT Exterior Heat-Zone brick extension kit HEAT-OUT-BEK
  • HHT 4" (102mm) pipe length SLP4
  • HHT 6" (152mm) pipe length SLP6
  • HHT 12" (305mm) pipe length SLP12
  • HHT 24" (610mm) pipe length SLP24
  • HHT 36" (914mm) pipe length SLP36
  • HHT 48" (1219mm) pipe length SLP48
  • HHT 2" - 6" (51 - 152mm) slip section to slide over pipe (can be cut to length) SLP6A
  • HHT 2" - 12" (51 - 305mm)  slip section to slide over pipe (can be cut to length) SLP12A
  • HHT 45 Degree elbow SLP45
  • HHT 90 Degree elbow SLP90
  • HHT Ceiling firestop SLP-FS
  • HHT Wall firestop SLP-WS
  • HHT Vertical termination cap - high wind (includes 4071-004 storm collar) SLP-TVHW
  • HHT 4" length of double wall DVP4
  • HHT 6" length of double wall DVP6
  • HHT 12" length of double wall DVP12
  • HHT 24" length of double wall DVP24
  • HHT 36" (6914mm) length of double wall DVP36
  • HHT 48" length of double wall DVP48
  • HHT 3 - 6"  slip section to slide over pipe (can be cut to length) DVP6A
  • HHT 3 - 12" slip section to slide over pipe (can be cut to length) DVP12A
  • HHT 45 Degree elbow DVP45
  • HHT 90 Degree elbow DVP90ST
  • HHT Ceiling firestop DVP-FS
  • HHT Wall Firestop DVP-WS
  • HHT Horizontal termination cap with short flue, attached slip and wall shield with heat shield, 3-1/8" - 4-5/8" (79-117mm) DVP-TRAP1
  • HHT Horizontal termination cap with long flue, attached slip and wall shield with heat shield, 5-3/8" - 9-3/8" (137 -238mm) DVP-TRAP2
  • HHT Vertical termination cap - high wind (includes 18901 storm collar) DVP-TVHW
  • Majestic PVI-SLP-B power vent — technical product illustration
  • Majestic PVLP-SLP power vent — technical product illustration
  • Majestic PVV-SLP power vent — technical product illustration
Hurry up! Current stock:
Available to order
READY TO ORDER

Your Fireplace Configuration

Review your selections, then add your configured fireplace to cart.

Configuration Calculator
Fireplace —
Selected Components $0.00
Selected Accessories $0.00
Configured Total —
Need help before ordering? Talk to a Product Expert (844) 545-7995
  • product-security-image-1.jpg
  • product-security-image-2.jpg
  • product-security-image-3.jpg
  • product-security-image-4.jpg
30-Day Returns Eligible items; authorization and exclusions apply

Request a return within 30 calendar days after delivery for eligible new, unused, unassembled and uninstalled items in original packaging. Written authorization is required. Read the Returns Policy for conditions, fees and exclusions.

Return Window 30 Days
Return Support Email Our Team
Shipping & Delivery Clear delivery expectations and tracking

Most in-stock items are released for shipment within 1–2 business days after payment and order review. Carrier transit is additional. Parcel transit commonly takes 3–7 business days; freight commonly takes 5–10 business days after shipment. Special-order and backordered items may take longer. Shipping details, exclusions and damage reporting.

Most In-Stock Items: Processing 1–2 Business Days After Review
Standard Shipping Eligible Contiguous U.S. Orders

Product overview

Majestic MER36P is a 36-inch Meridian Platinum indoor direct-vent gas fireplace. Six ceramic-fiber logs and glowing embers create the traditional display.

Key features

  • Sealed direct-vent combustion system.
  • IntelliFire Touch intermittent-pilot ignition with emergency battery backup.
  • Model-specific interior and heat-management choices.

Included components

Included: six ceramic-fiber logs, glowing ember display and ceramic glass, IFT-RC400 touchscreen remote, variable-speed fan, LED illuminated embers, accent lighting and gas flex connector.

Required components

A model-compatible decorative barrier front, approved vent system, appropriate gas connection and electrical supply are required. Operate only with the fixed glass and barrier installed.

Optional accessories

Compatible interior panels and heat-management equipment are optional. Wi-Fi control remains optional; the touchscreen remote, fan and lighting are already included. Accent lighting is not used with a black-glass liner.

Specifications

Model / MPNMER36P
Natural-gas input22,000–40,000 BTU/hr
Propane input21,000–40,000 BTU/hr
Appliance dimensions (W × H × D)41 × 40-7/8 × 21-7/16 inches
Minimum rough opening (W × H × D)42 × 40-1/8 × 22 inches; adjust for chase sheathing; rear venting with one 90-degree elbow adds 12 inches to depth
Viewing area (W × H)34-1/4 × 24-3/4 inches
Appliance weight160 pounds; packaged shipping weight is not stated here
GlassCeramic
VentingTop or rear vent; use the exact approved DVP/SLP configuration in the installation manual

Installation and safety notes

This is supplemental room heat, not a primary whole-home heating system. Plan the vent route, approved termination, gas connection, electrical supply and required barrier before ordering. Minimum side and rear clearance is 1/2 inch; keep 36 inches clear in front. Mantel, ceiling, finishing-material and optional heat-management clearances depend on the exact installation; use the manual diagrams. Installation and service must follow manufacturer documentation and applicable codes.

Warranty summary

Hearth & Home Technologies provides a component-specific limited warranty subject to its conditions, exclusions and coverage periods. Review the current owner manual warranty rather than assuming every component has lifetime coverage.

Exact-model manuals and downloads

Customers Also Viewed