Empire Boulevard DVLL72BP90 is a 72-inch single-sided linear direct-vent gas fireplace. Electronic ignition and a multifunction remote control operate the burner, with model-specific accent lighting and optional blower control.
Wide ceramic-glass flame presentation with an approved crushed-glass bed and a separately selected required liner.
Multifunction remote, ceramic glass, protective barrier screen, factory accent lighting and noncombustible board for the specified finishing areas.
Install either DVP72LPZ Ridgeback liner or DVP72LKR black-glass liner before operation. Install the liner before decorative media.
Use manufacturer-approved 1/4-inch crushed glass to cover the burner and screen in a single layer: the manual specifies 6 square feet minimum and up to 8 square feet. Clear glass is recommended over the screen to transmit the LED light; approved colors can accent the burner. Keep glass out of the recessed pilot, sensor and ignitor area and follow the manufacturer’s fuel-specific placement instructions.
Log sets, decorative frames and FBB20 dual blower are optional. Fit the optional blower before placing the appliance in its framed opening when practical.
| Model | DVLL72BP90 |
|---|---|
| Location | Indoor |
| Configuration | Single-sided linear |
| Natural gas input | 40,000–52,500 BTU/h |
| Propane input | 35,000–50,000 BTU/h |
| Appliance width × height × depth | 81 × 38-5/16 × 18-5/8 inches; height excludes standoffs |
| Gas inlet | 1/2-inch NPT |
| Venting | 5 × 8 direct vent |
Provide the complete approved direct-vent system and correctly configured fuel supply. Follow the exact model and revision’s framing, noncombustible-finishing, vent-route, termination, mantel and clearance diagrams. Appliance dimensions are not framing dimensions. Qualified installation and service must comply with manufacturer instructions and applicable codes.
DVLL72BP90 installation manual supplies the exact model, fuel, component and installation requirements. Installation and service must follow the complete manufacturer documentation and applicable codes.
Request a return within 30 calendar days after delivery for eligible new, unused, unassembled and uninstalled items in original packaging. Written authorization is required. Read the Returns Policy for conditions, fees and exclusions.
Most in-stock items are released for shipment within 1–2 business days after payment and order review. Carrier transit is additional. Parcel transit commonly takes 3–7 business days; freight commonly takes 5–10 business days after shipment. Special-order and backordered items may take longer. Shipping details, exclusions and damage reporting.
Empire Boulevard DVLL72BP90 is a 72-inch single-sided linear direct-vent gas fireplace. Electronic ignition and a multifunction remote control operate the burner, with model-specific accent lighting and optional blower control.
Wide ceramic-glass flame presentation with an approved crushed-glass bed and a separately selected required liner.
Multifunction remote, ceramic glass, protective barrier screen, factory accent lighting and noncombustible board for the specified finishing areas.
Install either DVP72LPZ Ridgeback liner or DVP72LKR black-glass liner before operation. Install the liner before decorative media.
Use manufacturer-approved 1/4-inch crushed glass to cover the burner and screen in a single layer: the manual specifies 6 square feet minimum and up to 8 square feet. Clear glass is recommended over the screen to transmit the LED light; approved colors can accent the burner. Keep glass out of the recessed pilot, sensor and ignitor area and follow the manufacturer’s fuel-specific placement instructions.
Log sets, decorative frames and FBB20 dual blower are optional. Fit the optional blower before placing the appliance in its framed opening when practical.
| Model | DVLL72BP90 |
|---|---|
| Location | Indoor |
| Configuration | Single-sided linear |
| Natural gas input | 40,000–52,500 BTU/h |
| Propane input | 35,000–50,000 BTU/h |
| Appliance width × height × depth | 81 × 38-5/16 × 18-5/8 inches; height excludes standoffs |
| Gas inlet | 1/2-inch NPT |
| Venting | 5 × 8 direct vent |
Provide the complete approved direct-vent system and correctly configured fuel supply. Follow the exact model and revision’s framing, noncombustible-finishing, vent-route, termination, mantel and clearance diagrams. Appliance dimensions are not framing dimensions. Qualified installation and service must comply with manufacturer instructions and applicable codes.
DVLL72BP90 installation manual supplies the exact model, fuel, component and installation requirements. Installation and service must follow the complete manufacturer documentation and applicable codes.
