A ceramic-clad pellet stove offered in the verified finish and front combinations shown below.
Ceramic cladding; standard or Black Glass front, as selected.
Available configurations
- Ethesia Pellet Stove - Bordeaux Ceramic — ETH70C-C02
- Ethesia Pellet Stove - Black Ceramic — ETH70C-C04
- Ethesia Pellet Stove - White Ceramic with Black Glass Front — ETH70GC-C01
- Ethesia Pellet Stove - Bordeaux Ceramic with Black Glass Front — ETH70GC-C02
- Ethesia Pellet Stove - Black Ceramic with Black Glass Front — ETH70GC-C04
Images show Bordeaux Ceramic, standard front. Other finishes and front configurations differ. Select the configuration by its listed SKU.
Specifications
| Fuel | Wood pellets only |
|---|---|
| Standard-version drawing | 54 cm W × 113 cm H × 64 cm D |
| Published standard-version hopper volume | 29.5 L |
| Published standard-version net appliance weight | 120 kg (not shipping weight) |
| Tested heat output | 13,655–35,644 BTU/hr under the specific test conditions reported for the Grecale/Round/Ethesia certification group |
| EPA-test weighted efficiency | 75% HHV / 82% LHV |
| Reported emission rate | 1.02 g/hr |
The dimensions and net weight above are the manufacturer’s standard-family technical-sheet values. Confirm the selected Glass configuration and installation layout against its appliance drawing before installation.
Installation
Professional installation is required. The North American manual specifies an 80 mm flue connection and a 3-inch Type L or PL vent system listed to UL 641 or ULC S609. Outside combustion air is mandatory, with a minimum 60 mm connection. A starting collar is required by the manual. Installation components are not included in the appliance price.
The manual supports a dry-contact external thermostat connection installed by qualified personnel. Use the supplied power cord and a grounded supply. Follow the appliance label and full manual for clearances, floor protection and vent routing.
