Majestic Products 30" Ruby Platinum Direct Vent Gas Insert RUBYP30I is a direct-vent gas insert for a suitable existing fireplace, with a hand-painted log display, LED ember bed and IntelliFire Touch 2.0 control. Select the correct fuel and documented log version.
Included equipment comprises the IFT2-RC450 remote, factory fan, ceramic glass, log assembly, LED ember bed, decorative brick base, ember materials, electrical cord and gas flex connector.
The supplied ember media comes in two 5-pound bags. This 30-inch model uses approximately 7.5 pounds following the installation manual’s placement instructions. Retain the remaining supplied media for servicing. This supplied material is not an additional customer media purchase requirement. Follow the exact oak or birch log-placement instructions; do not substitute logs or cover burner ports with extra material.
Select the exact fuel and log version before ordering. A compatible decorative barrier front and surround are required and ordered separately. The surround reset switch must be connected and on for operation. A switch relocation accessory alone is not a surround. A suitable existing solid-fuel masonry or factory-built fireplace, approved vent system, gas connection and unswitched electrical supply are required.
Use the 30-size approved front and surround for this insert: the manual lists CSFI, CASFI and INFIT front families with model-specific sizes and finishes. Optional BRICKMI30CR or BRICKMI30TB refractory panels and LINER-BK30 glass liner are listed. IFT-RC150U wall control and IFT-WFM Wi-Fi module are optional; they do not replace the required physical front and surround. Verify the complete accessory model and kit instructions before selecting a finish or custom surround.
| Exact models | RUBYP30IN natural gas, RUBYP30IL propane, RUBYP30IN-BIR natural gas with birch logs |
|---|---|
| Natural-gas input | 18,900–27,000 BTU/hr at 0–2,000 ft |
| Propane input | 17,500–25,000 BTU/hr at 0–2,000 ft |
| Appliance body | 31-1/8 inches W × 20-3/4 inches H × 14-1/2 inches D |
| Standard-surround minimum opening | Front width 31-5/8 inches; rear width 20-1/8 inches; front height 21 inches; rear height 19-3/16 inches; depth 15 inches |
| Appliance weight | 97 lb; this is not a packaged shipping weight |
| Glass | Ceramic |
| Control | IntelliFire Touch 2.0 with IFT2-RC450 remote |
| Electrical supply | Unswitched 110–120 VAC appliance cord; ignition system uses 6 VDC |
| Vertical vent length | 10 feet minimum to 50 feet maximum; no horizontal termination |
| Viewing Area | 27-1/2" x 15-15/16" |
The listed colinear installation uses separate 3-inch exhaust and air-intake liners and a vertical termination. Listed kits include LINK-DV30B, LINK-DV4-30B, LINKSQB-DV30, LINKSQC-DV30, LINKSQB-DV4-30 and LINKSQC-DV4-30. Kit length, termination and short-intake details must match the actual chimney and manual. Do not terminate horizontally or connect to a flue serving another appliance.
The opening dimensions above apply to a standard surround. The specified deep-surround arrangement reduces minimum depth to 14 inches; custom flush arrangements add 7/8 inch. When the exhaust collar and damper do not align, allow the additional 4 inches specified by the manual. A qualified installer must check the complete opening geometry, hearth, combustible mantel and side clearances, service access and existing chimney condition. Install only in accordance with the manufacturer instructions and applicable codes.
This appliance is a supplemental room heater, not a primary heating system. USB-C battery backup supports emergency ignition operation; AC-powered fans, lights and Wi-Fi functions are unavailable during a power outage. Operate only with the fixed glass and protective barrier installed. Arrange inspection and maintenance by a qualified service professional and follow the owner manual’s cooled-glass cleaning procedure.
The HHT limited warranty contains component-specific coverage, installation and maintenance conditions, and exclusions. Refer to the owner manual warranty schedule rather than treating every part as having identical coverage.
Request a return within 30 calendar days after delivery for eligible new, unused, unassembled and uninstalled items in original packaging. Written authorization is required. Read the Returns Policy for conditions, fees and exclusions.
Most in-stock items are released for shipment within 1–2 business days after payment and order review. Carrier transit is additional. Parcel transit commonly takes 3–7 business days; freight commonly takes 5–10 business days after shipment. Special-order and backordered items may take longer. Shipping details, exclusions and damage reporting.
Majestic Products 30" Ruby Platinum Direct Vent Gas Insert RUBYP30I is a direct-vent gas insert for a suitable existing fireplace, with a hand-painted log display, LED ember bed and IntelliFire Touch 2.0 control. Select the correct fuel and documented log version.
Included equipment comprises the IFT2-RC450 remote, factory fan, ceramic glass, log assembly, LED ember bed, decorative brick base, ember materials, electrical cord and gas flex connector.
The supplied ember media comes in two 5-pound bags. This 30-inch model uses approximately 7.5 pounds following the installation manual’s placement instructions. Retain the remaining supplied media for servicing. This supplied material is not an additional customer media purchase requirement. Follow the exact oak or birch log-placement instructions; do not substitute logs or cover burner ports with extra material.
Select the exact fuel and log version before ordering. A compatible decorative barrier front and surround are required and ordered separately. The surround reset switch must be connected and on for operation. A switch relocation accessory alone is not a surround. A suitable existing solid-fuel masonry or factory-built fireplace, approved vent system, gas connection and unswitched electrical supply are required.
Use the 30-size approved front and surround for this insert: the manual lists CSFI, CASFI and INFIT front families with model-specific sizes and finishes. Optional BRICKMI30CR or BRICKMI30TB refractory panels and LINER-BK30 glass liner are listed. IFT-RC150U wall control and IFT-WFM Wi-Fi module are optional; they do not replace the required physical front and surround. Verify the complete accessory model and kit instructions before selecting a finish or custom surround.
| Exact models | RUBYP30IN natural gas, RUBYP30IL propane, RUBYP30IN-BIR natural gas with birch logs |
|---|---|
| Natural-gas input | 18,900–27,000 BTU/hr at 0–2,000 ft |
| Propane input | 17,500–25,000 BTU/hr at 0–2,000 ft |
| Appliance body | 31-1/8 inches W × 20-3/4 inches H × 14-1/2 inches D |
| Standard-surround minimum opening | Front width 31-5/8 inches; rear width 20-1/8 inches; front height 21 inches; rear height 19-3/16 inches; depth 15 inches |
| Appliance weight | 97 lb; this is not a packaged shipping weight |
| Glass | Ceramic |
| Control | IntelliFire Touch 2.0 with IFT2-RC450 remote |
| Electrical supply | Unswitched 110–120 VAC appliance cord; ignition system uses 6 VDC |
| Vertical vent length | 10 feet minimum to 50 feet maximum; no horizontal termination |
| Viewing Area | 27-1/2" x 15-15/16" |
The listed colinear installation uses separate 3-inch exhaust and air-intake liners and a vertical termination. Listed kits include LINK-DV30B, LINK-DV4-30B, LINKSQB-DV30, LINKSQC-DV30, LINKSQB-DV4-30 and LINKSQC-DV4-30. Kit length, termination and short-intake details must match the actual chimney and manual. Do not terminate horizontally or connect to a flue serving another appliance.
The opening dimensions above apply to a standard surround. The specified deep-surround arrangement reduces minimum depth to 14 inches; custom flush arrangements add 7/8 inch. When the exhaust collar and damper do not align, allow the additional 4 inches specified by the manual. A qualified installer must check the complete opening geometry, hearth, combustible mantel and side clearances, service access and existing chimney condition. Install only in accordance with the manufacturer instructions and applicable codes.
This appliance is a supplemental room heater, not a primary heating system. USB-C battery backup supports emergency ignition operation; AC-powered fans, lights and Wi-Fi functions are unavailable during a power outage. Operate only with the fixed glass and protective barrier installed. Arrange inspection and maintenance by a qualified service professional and follow the owner manual’s cooled-glass cleaning procedure.
The HHT limited warranty contains component-specific coverage, installation and maintenance conditions, and exclusions. Refer to the owner manual warranty schedule rather than treating every part as having identical coverage.
