Product overview

Majestic WARMMAJIC-D WarmMajic II is a wood-burning fireplace with automatic combustion control, a firebrick-lined firebox and included fans. The installation requires the specified chimney and outside-air systems.

Key features

• Automatic combustion control helps establish a fire and return to the selected burn setting.
• Arched door design and firebrick-lined firebox.
• EPA-certified 2020 particulate-emission compliance.

Included components

Included equipment comprises the door, firebrick, noncombustible facing board, metal hearth strips, fans, outside-air hood and collars, attic insulation shield and CAK4A chimney air kit.

Required components

The installation requires a compliant hearth extension, outside-air duct system, an approved chimney with termination, and noncombustible finishing materials. These installation materials are not all included with the appliance.

Optional accessories

Optional accessories listed in the installation manual include MESH-HHT-C firescreen, LINTEL BAR-HHT lintel kit, OA-RD-6 outside-air offset adapter and HEAT-ZONE-WD-C heat-distribution kits. One or two Heat-Zone kits may be installed. These optional packages do not replace required chimney or combustion-air components.

Specifications

Installation and safety notes

Use the approved HHT SL300 chimney system or 8-inch DuraVent DuraPlus system. The included CAK4A is required with SL300. DuraPlus instead requires removal of the original starter ring and installation of the DuraPlus base plate; CAK4A is not required with that system. Follow the exact chimney-system instructions for supports, firestops, insulation shields and termination.

Outside combustion air is required. The manual specifies 6-inch UL181 Class 0 or Class 1 rigid or flexible ducting, supplied separately, with a maximum run of 40 feet. OA-RD-6 is an optional offset adapter, not a substitute for the required outside-air system. Maintain at least 1 inch of airspace at the appliance sides, 1/2 inch at the back and 2 inches around the chimney. The finished cavity must be at least 24 inches deep; consult the framing and hearth diagrams before construction. Do not fill required airspaces with insulation.

The automatic combustion control helps establish a fire and return it to the selected burn setting. Plan fan wiring and any optional Heat-Zone installation before closing the enclosure. The model is approved for manufactured-home installation only under the manual's conditions, including outside air, grounding and prohibition on installation in a sleeping room.

Warranty summary

Manufacturer warranty coverage and exclusions vary by component; consult the limited warranty in the model owner manual. Installation, operation and service must follow current manufacturer instructions and applicable codes.

Exact-model manuals and downloads

• WARMMAJIC-D installation manual — Rev D, February 2026
• WARMMAJIC-D owner manual and warranty — Rev C, December 2025