Description

Product Overview

Vermont Castings Radiance Direct Vent Natural Gas Free-Standing Fireplace RADVTCBSB is identified by model/SKU RADVTCBSB. Key product details include Fuel: Gas.

Beauty meets versatility. Defined by thoughtful design, cast iron styling and authentic embers, the Vermont Castings Direct Vent gas stoves achieve a timeless look. Multiple finish and control options create the stove that’s right for your home.

The largest of our Direct Vent gas stoves, the Radiance features realistic split oak logs and a ceramic burner to ensure superior flame movement. Select from the standard touchscreen remote or optional IntelliFire® app, for the solution that fits your life.

Features:

  • 25,000 – 38,000 BTUs
  • Available in three finishes
  • 100% cast iron construction
  • Operable doors for an authentic look and feel
  • Stoves available in three different sizes to fit your space (Stardance, Intrepid DV)
  • 25,000 - 38,000 BTU/hr Input (NG)
  • Standing pilot ignition (no electricity needed)
  • 25,000 - 36,000 BTU/hr Input (LP)
  • Ceramic burner with 4-piece split oak log set
  • Operable doors
  • Certified safety barrier
  • Top vent Black
  • flex connector
  • Ceramic Glass

Required to complete - Sold Separately:

  •  Requires a venting adapter to install. SLP series pipe requires CCSLP adapter. DuraVent pipe requires DV-46DVA-ADP adapter.
  • Units ship NG. Must order LP conversion kit separately. Not included with unit.

Specifications

Appliance Width 31"
Appliance Height 28"
Appliance Depth1 18-1/4"
Fuel Type Gas
BTU/hr Input2 25,000 - 38,000
Heating Capacity3 1,100 - 1,700 sq ft

1 Appliance Depth includes entire unit including depth of firebox and extension onto hearth.

2 BTU/hr Input based on maximum feed rate per hour multiplied by approximately 8600 BTU, which is average BTU from a pound of pellets.

3 This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner's manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner's/installation manual.

*For select products: Heating capacity to be used as a guide only. See your local dealer for help in determining the product that best suits your heating needs based on climate and home efficiency.

Specification Images
 

PRODUCT BROCHURES

OWNER'S MANUALS

SERVICE PARTS

Reviews

Features

SKU: RADVTCBSB
Condition: New

Vermont Castings

Vermont Castings Radiance Direct Vent Natural Gas Free-Standing Fireplace RADVTCBSB

No reviews yet Write a Review
SKU: RADVTCBSB
Condition: New
$4,429.00 - $5,279.00
🔥 Special Offer Available
Unlock an exclusive offer on this fireplace.
CONFIGURE YOUR FIREPLACE

Build Your Fireplace

Start with the required selections, then customize your fireplace with compatible finishes, controls, accessories and installation components.

Required selections must be completed before adding to cart. Optional accessories can be added as needed for your installation.
1

Required Configuration

Choose the fuel type and ignition system for your fireplace.

Required
  • HHT Radiance, Stardance, Oxford SLP adapter CCSLP
  • DuraVent Vermont Castings to DuraVent Adapter 46DVA-ADP
  • HHT Horizontal trapezoid termination kit (includes 1 each CCSLP, SLP-HHW2, SLP-WT-BK, SLP24-BK, SLP6-BK, SLP6A-BK, SLP90-BK) SLP-SK-BK
  • No Thanks
  • Vermont Castings Natural Gas to Propane Conversion Kit LPK-RADVT-IFT
  • Vermont Castings Warming Shelf - Classic Black 0001560 (Qty2)
  • Vermont Castings Warming Shelf - Majolica Brown Enamel 0001553 (Qty 2)
  • Vermont Castings Warming Shelf - Bordeaux Enamel 0001571
  • HHT IntelliFire Wi-Fi Module IFT-WFM
  • HHT IntelliFire Touch black remote control IFT-RC400
  • Vermont Castings Gas Vent Paint - Bordeaux 0006169
  • Vermont Castings Gas Vent Paint - Majolica Brown 0006168
  • Duravent 4"- 6 5/8" Double Wall 6" Black Galvalume Vent Pipe 46DVA-06B
  • Duravent 4"- 6 5/8" Double Wall 9" Black Galvalume Vent Pipe 46DVA-09B
  • Duravent 4"- 6 5/8" Double Wall 12" Black Galvalume Vent Pipe 46DVA-12B
  • Duravent 4"- 6 5/8" Double Wall 18" Black Galvalume Vent Pipe 46DVA-18B
  • Duravent 4"- 6 5/8" Double Wall 24" Black Galvalume Vent Pipe 46DVA-24B
  • Duravent 4"- 6 5/8" Double Wall 36" Black Galvalume Vent Pipe 46DVA-36B
  • Duravent 4"- 6 5/8" Double Wall 48" Black Galvalume Vent Pipe 46DVA-48B
  • Duravent 4"- 6 5/8" Double Wall 60" Black Galvalume Vent Pipe 46DVA-60B
  • Duravent 4"- 6 5/8" Double Wall 8 1/2" Pipe Extension Black Galvalume Vent Pipe (3" - 7") 46DVA-08AB
  • Duravent 4"- 6 5/8" Double Wall 16" Pipe Extension Black Galvalume Vent Pipe (3" - 14-1/2") 46DVA-16AB
  • Duravent 4"- 6 5/8" Double Wall 11" - 14-5/8" Pipe Extension Black Galvalume Vent Pipe (9-1/2" - 15-1/2") 46DVA-17TAB
  • Duravent 4"- 6 5/8" Double Wall 17" - 24" Pipe Extension Black Galvalume Vent Pipe (15-1/2" - 22-1/2") 46DVA-24TAB
  • Duravent 4"- 6 5/8" Double Wall 45 Degree Black Galvalume Elbow 46DVA-E45B
  • Duravent 4"- 6 5/8" Double Wall Black Galvalume 90 Degree Elbow 46DVA-E90B
  • Duravent 4"- 6 5/8" Double Wall 6" Galvalume Vent Pipe 46DVA-06
  • Duravent 4"- 6 5/8" Double Wall 9" Galvalume Vent Pipe 46DVA-09
  • Duravent 4" - 6-5/8" Double Wall Galvanized 12" Vent Pipe 45DVA-12
  • Duravent 4"- 6 5/8" Double Wall 18" Galvalume Vent Pipe 46DVA-18
  • Duravent 4"- 6 5/8" Double Wall 24" Galvalume Vent Pipe 46DVA-24
  • Duravent 4"- 6 5/8" Double Wall 36" Galvalume Vent Pipe 46DVA-36
  • Duravent 4"- 6 5/8" Double Wall 48" Galvalume Vent Pipe 46DVA-48
  • Duravent 4"- 6 5/8" Double Wall 60" Galvalume Vent Pipe 46DVA-60
  • Empire Hearth Duravent 4"- 6 5/8" Double Wall 8 1/2" Pipe Extension Galvalume Vent Pipe (3" - 7") 46DVA-08A
  • Duravent 4"- 6 5/8" Double Wall 16" Pipe Extension Galvalume Vent Pipe (3" - 14-1/2") 46DVA-16A
  • Duravent 4"- 6 5/8" Double Wall 11" - 14-5/8" Pipe Extension Galvalume Vent Pipe (9-1/2" - 15-1/2") 46DVA-17TA
  • Duravent 4"- 6 5/8" Double Wall 17" - 24" Pipe Extension Galvalume Vent Pipe (15-1/2" - 22-1/2") 46DVA-24TA
  • Duravent 4"- 6 5/8" Double Wall 36" Concentric Flex Galvalume Vent 46DVA-36FF
  • Duravent 4"- 6 5/8" Double Wall 60" Concentric Flex Galvalume Vent 46DVA-60FF
  • Duravent 4"- 6 5/8" Double Wall 120" Concentric Flex Galvalume Vent 46DVA-120FF
  • Duravent 4"- 6 5/8" Double Wall 30 Degree Galvalume Elbow 46DVA-E30
  • Duravent 4"- 6 5/8" Double Wall 45 Degree Galvalume Elbow 46DVA-E45
  • Duravent 4"- 6 5/8" Double Wall 60 Degree Galvalume Elbow 46DVA-E60
  • Duravent 4"- 6 5/8" Double Wall 90 Degree Galvalume Elbow 46DVA-E90
  • Duravent 4" - 6-5/8" Wall/Ceiling Thimble Cover 46DVA-DC-GAS
  • Duravent 4" - 6-5/8" Wall Thimble 46DVA-WT
  • Duravent 4" - 6-5/8" Wall Thimble – Reduced (use w/ round horizontal & sconce cap only) 46DVA-WTS
  • Duravent 4" - 6-5/8" Wall Thimble – Universal 46DVA-WTU
  • Duravent 4" - 6-5/8" Wall Firestop 46DVA-WFS
  • Duravent 4" - 6-5/8" Wall Strap 46DVA-WS
  • Duravent 4" - 6-5/8" Roof Support 46DVA-RS
  • Duravent 4" - 6-5/8" Cathedral Ceiling Support Box 46DVA-CS
  • Duravent 4" - 6-5/8" Ceiling Firestop 46DVA-FS
  • Duravent 4" - 6-5/8" Attic Insulation Shield 46DVA-IS
  • Duravent 4" - 6-5/8" Vinyl Siding Standoff (Sized for 46DVA-HC) 46DVA-VSS
  • Duravent 4" - 6-5/8" Vinyl Siding Standoff Kit V46DVA-VSKS
  • Duravent 4" - 6-5/8" Vinyl Siding Standoff Kit (4-pc. sized for 46DVA-HC) 46DVA-VSK
  • Duravent 4" - 6-5/8" Storm Collar 46DVA-SC
  • Duravent 4" - 6-5/8" Flashing - 0/12-6/12 Pitch 46DVA-F6
  • Duravent 4" - 6-5/8" Flashing - 7/12-12/12 Pitch 46DVA-F12
  • Duravent 4" - 6-5/8" Flashing - Flat 46DVA-FF
  • Duravent 4" - 6-5/8" Dead Soft Flashing - 7/12-12/12 Pitch for Metal Roofs 46DVA-F12DS
  • Duravent 4" - 6-5/8" Dead Soft Flashing - 0/12-6/12 Pitch for Metal Roofs 46DVA-F6DS
  • DuraVent Rubber Boot Flashing Kit - Max 12/12 Pitch, for Metal Roofs 200275
  • Duravent DuraTech 6" Diameter Snow Splitter 6"-10" 6DT-SP
  • Duravent 4" - 6-5/8" Square High Wind (Alum) 46DVA-HC
  • Duravent 4" - 6-5/8" Sconce High Wind (Alum) 46DVA-HSCH
  • Duravent 4" - 6-5/8" Snorkel Termination Cap 14” 46DVA-SNK14
  • Duravent 4" - 6-5/8" Snorkel Termination Cap 36” 46DVA-SNK36
  • Duravent 4" - 6-5/8" Round Cap w/ Square Base 46DVA-HRCS
  • Duravent 4" - 6-5/8" Horizontal Windguard 46DVA-WG
  • Duravent 4" - 6-5/8" High Wind Termination Cap 46DVA-VCH
  • Duravent 4" - 6-5/8" Low Profile Termination Cap 46DVA-VC
  • Duravent 4" - 6-5/8" Vertical Windguard 46DVA-VWG
Hurry up! Current stock:
In Stock
READY TO ORDER

Your Fireplace Configuration

Review your selections, then add your configured fireplace to cart.

Fireplace
Selected Venting $0.00
Selected Accessories $0.00
Configured Total
  • In Stock - Ships in 1-2 Business Days
  • Best Price Guarantee
  • Free Shipping to Contiguous U.S
  • 30 Day Return Policy
Need Help? Talk to a Fireplace Expert
5 customers are viewing this product
  • product-security-image-1.jpg
  • product-security-image-2.jpg
  • product-security-image-3.jpg
  • product-security-image-4.jpg
Return Policy

Return Policy

United Fireplaces has a 30-day return policy on all new items in original packaging. Please contact support@unitedfireplaces.com for any return or damage inquiries.

For more information, please visit our Return and Refund Policy.

Shipping Policy

Standard shipping times vary by product and location. Tracking details are sent once your order ships.

Recently Viewed

Company Details
United Fireplaces

1 (844) 545-7995

support@unitedfireplaces.com

2810 N Church St #797810, Wilmington, Delaware, 19802, United States

Monday - Friday 09:00 AM - 05:00 PM (EST)

Categories
All Products
Fireplaces
Grills
Outdoor Living
Venting
Log Sets

Information
Payment Policy
Track Your Order
Contact Us
Terms and Conditions
Returns and Refund policy
Shipping Policy
Privacy Policy
Disclaimer
About Us
Text Message Opt-In Services
Frequently Asked Questions (FAQs)
Blog
Sitemap

Read the full policy: Returns and Refund Policy

© copyright 2026 United Fireplaces.

Shipping Policy

Shipping Policy

Standard shipping times vary by product and location. Tracking details are sent once your order ships.

Read the full policy: Shipping Policy.

Product Overview

Vermont Castings Radiance Direct Vent Natural Gas Free-Standing Fireplace RADVTCBSB is identified by model/SKU RADVTCBSB. Key product details include Fuel: Gas.

Beauty meets versatility. Defined by thoughtful design, cast iron styling and authentic embers, the Vermont Castings Direct Vent gas stoves achieve a timeless look. Multiple finish and control options create the stove that’s right for your home.

The largest of our Direct Vent gas stoves, the Radiance features realistic split oak logs and a ceramic burner to ensure superior flame movement. Select from the standard touchscreen remote or optional IntelliFire® app, for the solution that fits your life.

Features:

  • 25,000 – 38,000 BTUs
  • Available in three finishes
  • 100% cast iron construction
  • Operable doors for an authentic look and feel
  • Stoves available in three different sizes to fit your space (Stardance, Intrepid DV)
  • 25,000 - 38,000 BTU/hr Input (NG)
  • Standing pilot ignition (no electricity needed)
  • 25,000 - 36,000 BTU/hr Input (LP)
  • Ceramic burner with 4-piece split oak log set
  • Operable doors
  • Certified safety barrier
  • Top vent Black
  • flex connector
  • Ceramic Glass

Required to complete - Sold Separately:

  •  Requires a venting adapter to install. SLP series pipe requires CCSLP adapter. DuraVent pipe requires DV-46DVA-ADP adapter.
  • Units ship NG. Must order LP conversion kit separately. Not included with unit.

Specifications

Appliance Width 31"
Appliance Height 28"
Appliance Depth1 18-1/4"
Fuel Type Gas
BTU/hr Input2 25,000 - 38,000
Heating Capacity3 1,100 - 1,700 sq ft

1 Appliance Depth includes entire unit including depth of firebox and extension onto hearth.

2 BTU/hr Input based on maximum feed rate per hour multiplied by approximately 8600 BTU, which is average BTU from a pound of pellets.

3 This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner's manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner's/installation manual.

*For select products: Heating capacity to be used as a guide only. See your local dealer for help in determining the product that best suits your heating needs based on climate and home efficiency.

Specification Images
 

PRODUCT BROCHURES

OWNER'S MANUALS

SERVICE PARTS

Customers Also Viewed