True North TN25C Wood-Burning Stove — 31010016
SKU / Model: 31010016
Fireplace only$2,363.55
Unlock an exclusive offer on this product.
Product overview
The True North TN25C works the way a wood stove should: simple, efficient and clean. It takes the proven 2.0 cu. ft. True North firebox and adds two patent-pending technologies, Electronic Combustion Assist and Passive Cat Technology, so the stove manages its own burn with no manual bypass to remember.
Load it, light it and set the single air lever. The electronics watch the firebox and flue temperatures and help the fire burn cleanly from start-up to coals, while the passive catalyst cleans the exhaust. The result is a peak output of 60,000 BTU/hr, 76% HHV efficiency and certified emissions of just 1.1 g/hr.
The TN25C is EPA 2020 certified, mobile-home approved and can use room air or outside air. Choose metallic black legs or a pedestal base, add the 80 CFM blower to move more heat, and add the battery pack to keep the combustion assist running through a power outage.
Key features
- Electronic Combustion Assist. Patent-pending electronic control that helps the fire burn cleanly without a manual bypass.
- Passive Cat Technology. Patent-pending catalytic technology for a cleaner burn.
- 60,000 BTU peak output. 2.0 cu. ft. firebox that takes 18-inch logs (20-inch maximum).
- EPA 2020 certified. Certified emissions of 1.1 g/hr and 76% HHV efficiency.
- Single-lever air control. Simple to run, with no bypass to operate.
- Clean glass. Air-wash system keeps the ceramic glass clear.
- Built solid. 10-gauge steel body, heavy plate-steel top and a gasketed cast iron door.
- Legs or pedestal. Metallic black legs or a pedestal base.
- Flexible combustion air. Room air, or outside air through the optional 4-inch adapter.
- Mobile home approved. With a listed double-wall connector and outside air.
Included components
The TN25C ships complete with its cast iron door, side shields and your choice of legs (31010016) or pedestal (31010017). In the box: the catalytic combustor (packed inside the firebox; install it before the first fire), flame shield, flue protector, 12-volt A/C wall adapter, hold-down brackets, 20 firebricks, baffle boards and tubes, and the installation and operating manual.
Required components
Venting is not included. The TN25C needs a 6-inch connector (UL 103HT / ULC-S641 listed double-wall, or 24-gauge black single-wall in residential installations) and a UL 103HT listed chimney, or a code-approved masonry chimney with a listed UL 1777 liner, rising at least 12 feet above the top of the stove. A non-combustible floor protector (UL 1618 Type 1; minimum 20-gauge steel, tile or equivalent) of at least 28 3/4" wide by 41" deep is required on a combustible floor in the USA. The Electronic Combustion Assist runs from a standard wall outlet through the included 12-volt adapter. Mobile home installations require outside combustion air through the 4-inch outside air adapter.
Optional accessories
Add the 80 CFM blower kit (31140001) to circulate more heat, the 4-inch outside air adapter (11100005) to bring combustion air from outdoors, and the battery pack (31490001) to keep the Electronic Combustion Assist working during power outages. All can be selected below.
Specifications
| Model / MPN | TN25C — 31010016 (legs), 31010017 (pedestal) |
|---|---|
| Brand | True North (Pacific Energy Fireplace Products) |
| Appliance type | Freestanding wood stove with Electronic Combustion Assist and Passive Cat Technology |
| Fuel | Seasoned cordwood only |
| Peak heat output | 60,000 BTU/hr (cordwood) |
| EPA tested output | 13,500 – 29,200 BTU/hr |
| Efficiency | 76% HHV / 75% LHV |
| Emissions | 1.1 g/hr — EPA 2020 certified |
| Firebox volume | 2.0 cu. ft. |
| Log length | 18" ideal, 20" maximum |
| Flue collar | 6" diameter, top exit |
| Base options | Metallic black legs or pedestal |
| Electrical | 12 V, 60 Hz, 1.0 A A/C wall adapter (included); optional battery pack 31490001 |
| Optional blower | 80 CFM, 115–120 V, 60 Hz, 0.5 A (31140001) |
| Alcove | Minimum height 7 ft, minimum width 38", maximum depth 3 ft |
| Floor protection (USA) | UL 1618 Type 1, minimum 28 3/4" W × 41" D |
| Chimney | UL 103HT listed, or code-approved masonry with UL 1777 liner; minimum 12 ft system height |
| Clearances to combustibles | Per the stove's rating label and manual for single-wall and double-wall connectors |
| Safety listing | UL 1482 / CAN/ULC-S627; mobile home approved |
| Location | Indoor residential; not for installation inside a fireplace |
Installation and safety notes
Place the TN25C on a non-combustible floor protector of at least 28 3/4" by 41" (USA) and keep the clearances shown on the stove's rating label for the connector you use. The chimney must exit at least 3 feet above the roof and 2 feet above anything within 10 feet, and the system must be at least 12 feet tall from the top of the stove. Never connect the stove to a flue that serves another appliance.
In a mobile home, connect outside combustion air through the 4-inch adapter, use a listed 6-inch double-wall connector (horizontal connectors are not permitted), anchor the stove to the floor with lag screws, and ground the stove to the home if a blower is installed.
Install the catalytic combustor before the first fire. Burn only dry, seasoned cordwood; never burn treated wood, garbage or coal, and never operate the stove with the door open or with broken parts.
Safety warnings and disclaimer
WARNING: Using this product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm, and soot, which is known to the State of California to cause cancer. For more information, visit www.p65warnings.ca.gov.
INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
DISCLAIMER: Flames and flame colors on the website may appear differently in real life.
Warranty summary
True North wood products carry a limited warranty to the original purchaser for normal residential use: 3 years parts and 1 year labor on the firebox, castings and glass (glass for thermal breakage only), 1 year parts and labor on electrical components and switches, and 1 year parts only on gaskets, paint (peeling), firebrick, baffle tubes, baffle manifold and ceramic fiber board. The TN25C catalytic combustor has its own 5-year warranty covering the combustor's retail price (no labor). Coverage requires installation by a qualified technician to the instructions and local codes, and it is not transferable.
Manufacturer manuals and downloads
- TN25C installation and operating manual (100006053, rev. 110925)
- TN25C brochure (2025)
- True North EPA test data
- True North wood products warranty
- True North catalytic combustor warranty
- Register your True North product
Frequently asked questions — TN25C
What does Electronic Combustion Assist do?
It is True North's patent-pending electronic control that helps manage the burn automatically, which is why the TN25C has no manual bypass. It runs from the included 12-volt wall adapter.
What happens in a power outage?
Add the optional battery pack (31490001) to keep the Electronic Combustion Assist running when the power is out.
What is the difference between the legs and pedestal models?
Only the base: 31010016 has metallic black legs and 31010017 has a pedestal. Firebox, output and venting are the same.
What size chimney does the TN25C need?
A 6-inch connector and a UL 103HT listed chimney, or a code-approved masonry chimney with a listed liner, at least 12 feet tall from the top of the stove.
Loading component details…

