True North TN20 Wood-Burning Insert — 31040002
SKU / Model: 31040002
Fireplace only$2,467.50
Unlock an exclusive offer on this product.
Product overview
Turn a drafty open fireplace into a real source of heat with the True North TN20 Wood Insert. It slides into an existing masonry wood fireplace and turns it into an efficient, clean-burning heater for small to medium living spaces.
The 2.0 cu. ft. firebox takes 18-inch logs and burns clean with True North's catalyst-free tube combustion. The gasketed cast iron door seals the firebox so warm room air isn't lost up the chimney, and the air-wash system keeps the ceramic glass clear for a full view of the fire. A variable-speed blower comes standard to move heat out into the room.
A standard 38" × 27" surround is included to finish the installation. For larger fireplace openings, True North offers an oversize backing plate and a deep-recess surround extension.
Key features
- Fireplace conversion. Fits an existing fireplace with an opening as small as 29" wide at the front, 20 1/4" high and 18" deep.
- Blower included. A variable-speed circulating blower comes standard.
- Catalyst-free tube combustion. Clean, reliable burning with no combustor to replace.
- EPA 2020 certified. Certified emissions of 1.6 g/hr.
- Seals in the heat. Gasketed cast iron door stops unnecessary air loss.
- Clean glass. Air-wash keeps the ceramic glass clear.
- Simple control. Single-lever air control with boost air.
- Surround included. Standard 38" × 27" surround, with oversize options available.
Included components
- Cast iron door
- Standard surround panels, 38" W × 27" H
- Variable-speed blower with speed control and three-prong power cord
- 20 full-size firebricks
- Baffle boards and tubes
- Leveling legs and bolts
- Fireplace back-wall metal tag
- Installation and operating instructions
Required components
- 6-inch chimney liner listed to UL 1777 (not included): rigid or flexible stainless, installed full length, or an approved direct flue connection (USA only); recommended minimum chimney height 15 feet
- Non-combustible hearth extension (USA): 16" in front and 8" on each side when raised 1" above a combustible floor, or 21" in front and 8" on each side when flush
- A grounded 115-volt outlet for the included blower
Optional accessories
- 31120002 oversize trimmable backing plate, 48" × 32", for fireplace openings larger than the standard surround covers
- 31250001 deep-recess surround extension, 46" × 31" × 2", which fits the standard surround
Specifications
| Model / MPN | TN20 Wood Insert Series B — 31040002 |
|---|---|
| Brand | True North (Pacific Energy Fireplace Products) |
| Appliance type | Wood-burning fireplace insert, non-catalytic |
| Unit dimensions | Insert body 21-1/2 in. W (25-1/8 in. overall width including the side projection) x 20-1/8 in. H; standard surround 38 in. W x 27 in. H (included); oversize surround 46 in. W x 31 in. H |
| Minimum fireplace opening | 29" wide at the front, 22" wide at the back, 20 1/4" high, 18" deep |
| Viewing area | Not published by the manufacturer |
| Clearances to combustibles | Adjacent sidewall 12 in. and side facing 8-1/2 in. (facing max 2 in. deep), measured from the side of the insert; mantel / top facing 15 in. (max 12 in. deep), measured from the firebox top; ceiling 54 in. from the base of the unit (manual clearance section and Figure 3, p.11) / adjacent sidewall 16-1/2 in., side facing 13 in., top facing 15 in., mantel 15 in. (rating label, p.25). Hearth extension (USA): 16 in. in front and 8 in. beyond each side when raised 1 in. above a combustible floor, or 21 in. in front and 8 in. each side when flush |
| Fuel | Seasoned cordwood only |
| Peak heat output | 55,000 BTU/hr (cordwood) |
| EPA tested output | 13,900 – 29,200 BTU/hr |
| Efficiency | 72.7% HHV / 78% LHV |
| Emissions | 1.6 g/hr — EPA 2020 certified |
| Firebox volume | 2.0 cu. ft. |
| Log length | 18" ideal, 20" maximum |
| Approximate burn time | 6 – 8 hours |
| Standard surround | 38" W × 27" H (included) |
| Optional surrounds | Oversize backing plate 48" × 32"; deep-recess extension 46" × 31" × 2" |
| Chimney liner | 6" full-length liner listed to UL 1777, or approved direct connection; 15 ft recommended minimum chimney height |
| Hearth extension (U.S.) | 16" front × 8" sides raised 1", or 21" front × 8" sides flush |
| Blower | Included; variable speed, 115 V, 60 Hz, grounded 3-prong cord |
| Safety listing | UL 1482 / ULC S628 |
| Location | Indoor residential; for installation in a masonry wood fireplace (True North's installation section states it shall not be installed in a factory-built fireplace) |
Installation and safety notes
Before ordering, measure the fireplace: the opening must be at least 29 inches wide at the front, 22 inches wide at the back, 20 1/4 inches high and 18 inches deep. The existing fireplace and chimney should be inspected and cleaned, and the 6-inch liner run full length to the top of the chimney.
Keep the clearances to side walls, facing and mantels listed in the Specifications above, and provide the required non-combustible hearth extension in front of the insert. Plug the blower into a grounded outlet and route the cord away from hot surfaces.
Burn only dry, seasoned cordwood air-dried for six months or more. Never burn treated wood, garbage, coal or plastics, and never over-fire the insert or operate it with broken parts.
Safety warnings and disclaimer
WARNING: Using this product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm, and soot, which is known to the State of California to cause cancer. For more information, visit www.p65warnings.ca.gov.
INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
DISCLAIMER: Flames and flame colors on the website may appear differently in real life.
Warranty summary
True North wood products carry a limited warranty to the original purchaser for normal residential use: 3 years parts and 1 year labor on the firebox, castings and glass (glass for thermal breakage only), 1 year parts and labor on electrical components and switches, and 1 year parts only on gaskets, paint (peeling), firebrick, baffle tubes, baffle manifold and ceramic fiber board. Coverage requires installation by a qualified technician to the instructions and local codes, and it is not transferable. Register the stove with True North after installation.
Manufacturer manuals and downloads
- TN20 Wood Insert Series B installation and operating manual (100000127, rev. 230726)
- TN20 EPA test data
- True North wood stove brochure (2026)
- True North wood products warranty
- Register your True North product
Frequently asked questions — 31040002
Will the TN20 insert fit my fireplace?
The minimum opening is 29" wide at the front, 22" wide at the back, 20 1/4" high and 18" deep. Measure your firebox before ordering.
Is a chimney liner required?
Yes. Use a full-length 6-inch liner listed to UL 1777, or an approved direct flue connection, as the manual specifies. The liner is sold separately.
Does the insert come with a blower?
Yes. A variable-speed blower is included and plugs into a grounded 115-volt outlet.
What if my fireplace opening is larger than the surround?
The standard 38" × 27" surround is included. For bigger openings, add the oversize 48" × 32" backing plate or the 46" × 31" × 2" deep-recess surround extension.
Loading component details…

