True North TN10 Wood-Burning Stove — 31010018
SKU / Model: 31010018
Fireplace only$1,809.00
Unlock an exclusive offer on this product.
Product overview
The True North TN10 brings real wood heat to the rooms that need it most, in a stove small enough to fit almost anywhere. It's built for the cozy spaces in a home: a den, a cabin, a sunroom, a basement family room or a workshop, where you want a steady, comfortable fire for an evening without feeding a large stove.
Inside, a tube combustion system burns clean without a catalyst, so there's nothing to replace and nothing to babysit. A single lever sets the burn, the air-wash system keeps the ceramic glass clear so you can watch the fire, and the gasketed cast iron door seals tight. The heavy plate-steel top and 10-gauge steel body are built to last for years of use.
The TN10 is EPA 2020 certified, mobile-home approved and can draw combustion air from inside the room or from outdoors. The current TN10 ships as a stove body, so you choose its base: 8-inch metallic black legs or, when available, the new 8-inch pedestal. An optional 80 CFM blower pushes more of its heat into the room.
Key features
- Compact economy. A 0.8 cu. ft. firebox sized for small rooms, occasional use and shorter burns.
- Catalyst-free tube combustion. Reliable, durable clean-burn technology with no combustor to replace.
- EPA 2020 certified. Certified emissions of 1.4 g/hr.
- Clear view of the fire. An air-wash system keeps the ceramic glass clean.
- Simple to run. One lever controls the air, with a boost-air feature to get the fire going.
- Built solid. 10-gauge steel body, heavy plate-steel top and a gasketed cast iron door.
- Flexible combustion air. Uses room air or outside air through the optional 3-inch adapter.
- Mobile home approved. With a double-wall connector and outside air, as the manual specifies.
- Optional blower. An 80 CFM convection blower moves more heat into the room.
Included components
The TN10 (31010018) ships pre-assembled in metallic black with its cast iron door, side shields, hold-down brackets, a set of 10 firebricks and the installation and operating manual. The base is not included: every TN10 needs either the 8-inch leg kit (31130002) or the 8-inch pedestal kit (31130001, coming soon), selected below.
Required components
A base is required: choose the 8-inch leg kit (31130002) or, when available, the 8-inch pedestal kit (31130001). Venting is not included. The stove needs a 6-inch chimney connector (minimum 24-gauge black single-wall or a listed double-wall connector) and a chimney listed to UL 103HT, or a code-approved masonry chimney with a flue liner. The total system must rise at least 12 feet above the top of the stove. A non-combustible floor protector (UL 1618 Type 1, or equivalent such as 20-gauge steel or tile) of at least 28 3/8" wide by 29 1/2" deep is also required on a combustible floor. Mobile home and alcove installations require outside combustion air through the 3-inch outside air adapter.
Optional accessories
Add the 80 CFM blower kit (31140001) to circulate more heat, and the 3-inch outside air adapter (11100008) to supply combustion air from outdoors. Both can be selected below.
Specifications
| Model / MPN | TN10 — 31010018 (new model; replaces 31010004) |
|---|---|
| Brand | True North (Pacific Energy Fireplace Products) |
| Appliance type | Freestanding wood stove, non-catalytic; leg or pedestal base sold separately |
| Fuel | Seasoned cordwood only |
| Peak heat output | 30,000 BTU/hr (cordwood) |
| EPA tested output | 13,100 – 17,600 BTU/hr |
| Efficiency | 72.6% HHV / 80.4% LHV |
| Emissions | 1.4 g/hr — EPA 2020 certified |
| Firebox volume | 0.8 cu. ft. |
| Log length | 12" ideal, 14" maximum |
| Approximate burn time | 4 – 6 hours |
| Flue collar | 6" diameter, top exit; flue center 5 3/8" from the rear |
| Unit Width | 21 3/8" |
| Unit Height | 27 3/4" overall; 26 1/4" to the stove top |
| Unit Depth | 15" (18 1/2" with the optional blower) |
| Clearances — single-wall connector | Back 8", side 8", corner 6" to the stove |
| Clearances — double-wall connector | Back 6", side 8", corner 3" to the stove |
| Alcove | Double-wall connector; minimum height 5 ft, minimum width 38", maximum depth 3 ft |
| Floor protection | UL 1618 Type 1; 16" in front of the firebox and 8" past each side of the door opening; minimum 28 3/8" W × 29 1/2" D |
| Chimney | UL 103HT listed or code-approved masonry with liner; minimum 12 ft system height |
| Optional blower | 80 CFM, 115 V, 60 Hz, 0.5 A (31140001) |
| Safety listing | UL 1482; mobile home approved |
| Location | Indoor residential; not for sleeping rooms or installation inside a fireplace |
Installation and safety notes
Place the TN10 on a non-combustible floor protector that reaches 16 inches in front of the firebox, 8 inches past each side of the loading door, and under any horizontal connector plus 2 inches on each side. Keep the clearances on the rating label to walls, corners and furniture. The chimney must exit at least 3 feet above the roof and 2 feet above anything within 10 feet.
In a mobile home, use a listed double-wall connector only, connect outside combustion air with the 3-inch adapter, secure the stove to the floor, and run the chimney at least 12 feet above the stove top. Do not install the stove in a sleeping room.
Burn only dry, seasoned cordwood that has air-dried for at least six months. Never burn treated wood, garbage, coal or salt-water driftwood, and never operate the stove with the door open or with broken parts.
Safety warnings and disclaimer
WARNING: Using this product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm, and soot, which is known to the State of California to cause cancer. For more information, visit www.p65warnings.ca.gov.
INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
DISCLAIMER: Flames and flame colors on the website may appear differently in real life.
Warranty summary
True North wood products carry a limited warranty to the original purchaser for normal residential use: 3 years parts and 1 year labor on the firebox, castings and glass (glass for thermal breakage only), 1 year parts and labor on electrical components and switches, and 1 year parts only on gaskets, paint (peeling), firebrick, baffle tubes, baffle manifold and ceramic fiber board. Coverage requires installation by a qualified technician to the instructions and local codes, and it is not transferable. Register the stove with True North after installation.
Manufacturer manuals and downloads
- TN10 installation and operating manual (100008631, rev. 070426)
- TN10 EPA test data
- True North wood stove brochure (2026)
- True North wood products warranty
- Register your True North product
Frequently asked questions — TN10
How big a space can the TN10 heat?
The TN10 is a compact stove for small rooms and occasional use, with a 0.8 cu. ft. firebox and EPA-tested output of 13,100 to 17,600 BTU/hr. For larger or open spaces, the TN20 has a 2.0 cu. ft. firebox.
What size chimney does the TN10 use?
A 6-inch connector and chimney. Use a UL 103HT listed chimney or a code-approved masonry chimney with a liner, at least 12 feet tall from the top of the stove.
Can the TN10 be installed in a mobile home?
Yes. It's mobile home approved when installed with a listed double-wall connector, the 3-inch outside air adapter and a chimney at least 12 feet above the stove top.
Does the TN10 come with legs?
No. The current TN10 (31010018) ships without a base. Choose the 8-inch leg kit (31130002) or, once available, the 8-inch pedestal kit (31130001).
Is a blower included?
No. The 80 CFM blower kit (31140001) is optional and plugs into a standard 115-volt outlet.
Loading component details…

