Remii Classic Lumina 33" Electric Fireplace CLASSIC-33-LUMINA

Product overview

The Remii Classic Lumina brings the timeless look of a traditional fireplace to your room in a 33-inch built-in firebox. The heater and vents are tucked into the inner top of the unit, so the face stays clean and the warm air flows down over the glass.

Flames blend red, yellow and orange in levels you set, the ember bed mixes its own colors, and canopy lighting adds 10 colors or a slow color cycle. Three flame speeds let you choose a gentle flicker or a livelier fire, and the flames run with the heat off for ambiance all year.

The heater warms rooms up to about 400 square feet. Set the room temperature you want, let the timer switch it off, or control it from your phone with the Tuya Smart app. It plugs in or can be hardwired, and Remii offers 3-sided and 4-sided trim kits to finish the opening.

Key features

• Traditional style, clean face. Hidden venting at the top keeps the front free of grills.
• Top heat flow. Warm air leaves the inner top of the firebox and cascades down over the glass.
• Multi-color flames. Red, yellow and orange flame levels adjust separately and blend together.
• Adjustable ember bed. Set the ember glow or let it shift through colors on its own.
• Canopy lighting in 10 colors. Pick a color or run the dynamic color cycle.
• Three flame speeds. Set the flame movement to low, medium or high.
• Flames without heat. Run the flame effect on its own all year.
• Smart thermostat. Holds a set room temperature from 59°F to 83°F (15–28°C), with high, low and auto heat.
• Shut-off timer. Turns the fireplace off after 30 minutes to 8 hours.
• WiFi app control. Run the fireplace from your phone with the Tuya Smart app.
• Remote control included. Flames, lights, heat and timer from across the room.
• Plug-in or hardwire. Plugs into a grounded 120-volt outlet, or a qualified electrician can hardwire it.
• 2-year limited warranty. Backed by Remii.

Included components

The fireplace ships with its front trim and glass and the remote control.

Required components

A framed wall opening of 32 3/4" W × 21 7/8" H × 12" D, leaving at least 1/4" (6 mm) around the unit. A 15-amp, 120-volt, 60 Hz branch circuit with proper ground, preferably dedicated, with the outlet beside the fireplace, not above it, or a hardwire connection by a qualified electrician. Do not use an extension cord or power strip.

Optional accessories

Remii 3-sided and 4-sided trim kits for the Classic Lumina. Remii offers 15 colors of optional fire glass: Clear Reflective, Ocean Blue, Charcoal, Champagne, Dark Grey, Clear Gem, White, Dusty Purple, Amber, Orange, Suntea, Black, Sable, Smokey Grey and White, and Canyon Brown.

Specifications

Product video

Installation and safety notes

Choose a dry location at least 3 feet (0.9 m) from curtains, furniture, bedding and other combustibles, out of direct sunlight on the glass. The outlet must be easy to reach, beside the fireplace rather than above it. Test the fireplace on a grounded 120-volt outlet before you build it in.

Frame the 32 3/4" W × 21 7/8" H × 12" D opening with at least 1/4" around the unit. Remove the trim and front glass, then the inner side panels, refit the trim to check the fit, slide the fireplace in and secure it with two screws on each side. Refit the panels and trim, add media, then the glass.

Do not use an extension cord or power strip. Hardwiring and any new wiring must be done by a qualified electrician to local and national codes. The fireplace runs best in rooms between 41°F and 95°F (5–35°C).

Safety warnings and disclaimer

WARNING: This product can expose you to chemicals including lead in the wiring, which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.

INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.

DISCLAIMER: Flames and flame colors on the website may appear differently in real life.

Warranty summary

Remii covers this fireplace with a 2-year limited warranty from the date of first purchase, for the original purchaser, against manufacturing and material defects. Replacement parts and shipping are free, but labor is not covered, LED lights are excluded and proof of purchase is required.

Manufacturer manuals and downloads

• Installation and owner's manual, Classic series (Version 202309)
• CLASSIC-33 technical specification sheet
• Remii brochure (2024)
• Remii brochure (2022)
• Remii limited warranty
• Remii product presentation (PowerPoint)
• Remii Classic Lumina product video (YouTube)

Frequently asked questions — CLASSIC-33-LUMINA

What is the framing size for the CLASSIC-33-LUMINA?

Frame an opening of 32 3/4" W × 21 7/8" H × 12" D, leaving at least 1/4" around the unit.

Does it need a dedicated circuit?

It needs a 15-amp, 120-volt grounded branch circuit, and a dedicated circuit is recommended.

Can I use the flames without heat?

Yes. The flames, ember bed and canopy lights run with the heater off.

Can it be hardwired?

Yes. It ships with a cord, and a qualified electrician can remove the cord and hardwire it.