Real Fyre G31 33/39" 3-Tiered Vented Burner G31-33/39

SKU / Model: G31-33/39

Free Fast Shipping
In-stock items are processed in 1–2 business days.

$1,606.00

Early Black Friday Savings applied in your cart

YOUR SPECIAL OFFER IS AVAILABLE

This product qualifies for an exclusive special offer.

Complete your selections and add this product to your cart to unlock the eligible offer.

Offer eligibility and final promotional pricing are confirmed in the cart. Accessories qualify separately. Offers may change.

Product overview

The Real Fyre G31 is the three-tiered burner at the heart of Real Fyre's Premier Series. Its burner steps up in three levels beneath the logs, so flame rises from the front, middle and back of the set and builds into a high, full-bodied fire, while R.H. Peterson notes it does so on fewer BTUs than its other vented burners.

A porcelainized reflective front panel mirrors the glowing ember bed for extra depth, and Bryte Coals, glowing embers and lava granules are included to finish the fire bed. The G31 was created for the hand-crafted Mountain Crest Oak and Mountain Crest Split Oak logs and is also listed for seven Charred Series designs.

This 33/39" system fits the 33" and 39" Mountain Crest Oak (MCO) and Mountain Crest Split Oak (MCS) sets and the 36" Charred Split (CHS-36), Charred Royal English Oak (CHB-36) and Charred Mountain Birch (CHMBW-36) sets. Choose a match-lit burner, a manual standing-pilot valve, a "17" variable remote system, "02" electronic ignition with an on/off remote, or "2VT" electronic ignition with a variable-flame remote.

Key features

  • Three-tiered burner. Flame rises in three levels for a high, full fire from front to back.
  • Porcelainized reflective front panel. Reflects the ember bed for a deeper glow.
  • Bryte Coals, glowing embers and lava granules included. A complete, natural-looking fire bed.
  • Five control choices. Match-lit (natural gas only), manual safety pilot, "17" variable remote, "02" electronic on/off remote, or "2VT" electronic variable remote.
  • Battery-powered electronic systems. "02" and "2VT" systems run on batteries with no pilot burning between uses.
  • Natural gas or propane. Every valve system is offered for both fuels.
  • 10-year burner warranty. Indoor vented burners are covered for ten years (controls excluded).

Included components

  • G31-33/39 three-tiered burner with porcelainized reflective front panel and custom grate
  • Bryte Coals (EM-11) and glowing embers
  • Lava granules (LF-5) and lava coals (LFC-6)
  • Sand (natural gas) or vermiculite (propane)
  • Flex connector kit (CK-5-24SP) and damper clamp (DC-1)
  • Two log locators
  • Valve systems: pre-assembled control valve, pilot assembly and valve extension kit
  • Remote systems: transmitter and receiver

Required components

  • A Real Fyre vented log set listed for the G31 burner (sold separately)
  • A wood-burning fireplace of noncombustible construction with a working flue and a chimney at least 15 ft tall from hearth to top
  • A gas supply with a shut-off valve outside the firebox and 1/2" minimum interior diameter supply pipe (larger for runs over 20 ft)

Ignition options

  • Match-lit (no valve) (natural gas, G31-33/39). The burner ships without a valve. It is lit by hand and controlled at your fireplace's existing gas valve. Natural gas only.
  • Manual safety pilot valve (G31-33/39A, G31-33/39PA). A pre-assembled manual valve with a standing safety pilot and regulator. The pilot shuts the gas off if the flame goes out; the burner is operated at the valve knob.
  • Variable remote, low-profile valve (17) (G31-33/39-17, G31-33/39-17P). Pre-assembled low-profile "17" series automatic valve with a standing pilot and a basic variable remote for on/off and flame-height control.
  • Electronic ignition IPI, on/off remote (02) (G31-33/39-02, G31-33/39-02P). Pre-assembled "02" electronic valve: the pilot lights only when you turn the fire on with the on/off remote. The burner runs on 2 D batteries.
  • Electronic ignition, variable remote (2VT) (G31-33/39-2VT, G31-33/39-2VPT). Electronic ignition with a variable remote, so you can turn the fire on and off and adjust the flame height. The burner runs on 4 AA batteries.

Specifications

Model / MPN G31-33/39, G31-33/39A, G31-33/39PA, G31-33/39-17(P), G31-33/39-02(P), G31-33/39-2VT, G31-33/39-2VPT
Brand / series Real Fyre by R.H. Peterson, Premier Series G31 3-Tiered Burner System
Appliance type Vented decorative gas log burner (logs sold separately)
Burner size 33/39"
Heat input 75,000 BTU/hr natural gas (85,000 BTU/hr natural gas on the "02" system); 60,000 BTU/hr propane. 2VT low setting 22,000 (NG) / 23,000 (LP) BTU/hr
Minimum fireplace 33" log set: 39" front width, 30" rear width, 16" depth, 17" height; 39" log set: 41" front width, 32" rear width, 16" depth, 17" height (add 2" to front and rear width for "02" systems)
Gas inlet pressure Natural gas 5" to 10.5" w.c.; propane 11" to 13" w.c.
Power "02" systems: 2 D batteries in the burner, 4 AA in the receiver; "2VT" systems: 4 AA batteries; transmitters use a 12V battery
Venting Vented: wood-burning fireplace with working flue, damper fully open and damper clamp installed; minimum chimney height 15 ft
Warranty Burner (excluding controls) 10 years; -17 valve 2 years; all other valves, pilots and controls 1 year (excluding batteries)

Installation and safety notes

Install only in a wood-burning fireplace with a working flue and a chimney at least 15 ft tall. Keep the damper fully open whenever the burner is lit and permanently install the damper clamp; the manual lists the minimum permanent damper opening for each chimney height. If an ash lip exists, the depth requirement begins inside the lip.

Gas type must match the rating plate and the system is not field convertible. Stack the logs exactly as shown in the G31 log stack instructions. Follow NFPA 54 or CSA B149.1 and local codes.

Safety warnings and disclaimer

WARNING: Burning natural gas or propane in this decorative appliance produces combustion byproducts, including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.

INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.

DISCLAIMER: Flames and flame colors on the website may appear differently in real life.

Warranty summary

R.H. Peterson warrants Real Fyre vented products to the original purchaser, for products installed in the United States or Canada and operated and maintained as intended for single-family residential use (a copy of the sales slip is required as proof of purchase): vented refractory gas logs and Fyre Spheres for as long as the original purchaser owns them when used indoors, and 3 years when used outdoors; vented fiber-ceramic blended gas logs 5 years indoors and 3 years outdoors; indoor vented gas log burners and stainless steel burners (excluding controls) 10 years; outdoor vented stainless steel burners (excluding controls) 5 years; SPK-26 3 years; APK-17 (including the -17 valve) 2 years; all other valves, pilots and controls 1 year (excluding batteries).

Manufacturer manuals and downloads

Frequently asked questions — G31-33/39

Which logs fit the G31?

Mountain Crest Oak, Mountain Crest Split Oak and the Charred Oak, Charred Split, Charred American Oak, Charred Royal English Oak, Charred Angel Oak, Charred Angel Split Oak and Charred Mountain Birch designs in the matching sizes.

What is the difference between "02" and "2VT"?

Both light the pilot electronically only when the fire is turned on. "02" has an on/off remote; "2VT" adds variable flame height from the remote.

Loading component details…

Add to cart to see your price.

Call for best price