Real Fyre G21 18" Vent-Free Glass Burner G21-GL-18-12
SKU / Model: G21-GL-18-12
Base price$1,652.00
Early Black Friday Savings applied in your cart
Unlock an exclusive offer on this product.
Product overview
The Real Fyre G21 is a contemporary vent-free burner for fire glass. An ANSI certified stainless steel burner with a pre-assembled remote control valve and ODS safety system sits under a polished reflective stainless panel, and a bed of Real Fyre Fyre Glass or Fyre Gems turns the flame into a clean, modern fire. The manual marks it for indoor or outdoor use (outdoors where it is not directly exposed to rain or wind). American Fyre Designs lists the G21 stainless steel burner (up to 24") for its vent-free Phoenix, Grand Phoenix, Mariposa and Contractor's Model outdoor fireplaces.
This 18" burner needs about 7.5 lb of Real Fyre glass or gems (sold separately; one 10 lb package covers the 18" and 24" sizes). Choose natural gas or propane, with the basic on/off remote included ("12") or without it ("12M").
Key features
- Vent-free glass burner. No chimney needed.
- Stainless steel burner, polished reflective panel. A bright, contemporary look.
- ODS safety pilot. Shuts the gas off before room oxygen falls below 18%.
- Series "12" on/off valve. With basic remote, or without it ("12M"); works with a Real Fyre wall switch or thermostat.
- Indoor or protected outdoor use.
- Natural gas or propane. Factory built for one gas; not convertible.
Included components
- GG21-18 stainless steel burner assembly
- ODS pilot and SV-43 (natural gas) or SV-43P (propane) control valve
- Polished reflective front cover (G21-03-18)
- Piezo igniter, on/off switch and flex connector
- Damper clamp and mounting hardware
- "12" models: RR-1A basic on/off remote and heat shield
Required components
- About 7.5 lb of Real Fyre Fyre Glass, Reflective Fyre Glass or Fyre Gems (sold separately); only Real Fyre glass or gems are certified
- A fireplace that meets the minimum dimensions below
- A gas supply with a shut-off valve, installed by a qualified gas professional
Control options
- On/off remote (12): Series "12" valve with an on/off toggle switch and a basic on/off remote (transmitter with 12V battery, receiver with 4 AA batteries). Can also be used with a Real Fyre wall switch or wall thermostat.
- On/off valve, remote not included (12M): The same series "12" valve without the RR-1A remote kit. Add a Real Fyre remote or wall switch separately.
Specifications
| Model / MPN | G21-GL-18-12, G21-GL-18-12M, G21-GL-18-12P, G21-GL-18-12MP |
|---|---|
| Brand / series | Real Fyre by R.H. Peterson, G21 Series vent-free glass burner |
| Appliance type | Vent-free (unvented) decorative gas burner for fire glass, with ODS; stainless steel |
| Burner size | 18" |
| Heat input | 30,000 BTU/hr natural gas; 27,000 BTU/hr propane |
| Minimum fireplace (manual fig. 3-1) | 22" front width, 16" rear width, 13" depth, 17" height |
| Glass required | About 7.5 lb Real Fyre glass or gems; do not add extra glass and do not put lava granules on the burner |
| Gas inlet pressure | Natural gas 5" to 10.5" w.c. (3.5" outlet); propane 11" to 13" w.c. (10" outlet) |
| Power | Remote: 12V transmitter battery, 4 AA in the receiver |
| Room size | Room volume (L x W x H) x 20 = maximum BTU allowed |
| Clearances | Sidewalls 6"; ceiling 42" from the top of the opening; 12" noncombustible above the opening without a hood (10" with a hood) |
Installation and safety notes
This is a vent-free (unvented) decorative appliance with an oxygen depletion sensor (ODS) that shuts the burner off before the oxygen level in the room falls below 18%. Size the room before you buy: the room volume (length x width x height) multiplied by 20 is the maximum BTU input allowed, so a 36,000 BTU burner needs at least 1,800 cubic feet. Do not install in a bedroom or bathroom (units over 10,000 BTU/hr may not be installed in bedrooms), never leave it burning unattended or while anyone sleeps, and never burn wood or other solid fuel in the fireplace. Glass doors must be fully open during operation. Check local codes: some areas restrict or prohibit vent-free appliances. Input ratings apply up to 2,000 ft elevation.
Main flames should rise 5" to 8" above the glass. Use only the gas type on the rating plate. Outdoors, protect the burner from direct rain, precipitation and wind. Install per the R.H. Peterson manual, local codes and ANSI Z223.1 / NFPA 54.
Safety warnings and disclaimer
WARNING: Burning natural gas or propane in this decorative appliance produces combustion byproducts, including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
DISCLAIMER: Flames and flame colors on the website may appear differently in real life.
Warranty summary
Real Fyre vent-free burners, valves and logs carry R.H. Peterson's limited warranty for the original purchaser; see the Real Fyre warranty page for current terms by component.
Manufacturer manuals and downloads
- G21 vent-free glass burner installation and operating instructions
- Vent-free DOs and DON'Ts
- Real Fyre Vent-Free Catalog
Frequently asked questions — G21-GL-18-12
How much glass do I need?
About 7.5 lb of Real Fyre Fyre Glass or Fyre Gems for the 18" burner.
Can it go outdoors?
Yes, where it is not directly exposed to rain or wind, for example in an American Fyre Designs vent-free outdoor fireplace that lists the G21.
Loading component details…
Add to cart to see your price.

