Real Fyre G18 16/18" Vent-Free Gas Log Burner G18-16/18
SKU / Model: G18-16/18
Base price$1,107.00
Early Black Friday Savings applied in your cart
Unlock an exclusive offer on this product.
Product overview
The Real Fyre G18 is the vent-free burner system behind R.H. Peterson's Evening Fyre series. It is ANSI certified as an unvented room heater (and as a vented decorative appliance), with a pre-assembled control valve and ODS safety pilot, and it ships with the grate, connector kit, Glowing Embers, Bryte Coals, Lava granules and two decorative wood-chunk covers, so the fire bed is complete once the logs are in place.
Choose the 16/18" burner for 16/18" log sets or the 24/30" burner for 24" and 30" sets: Evening Fyre (EFV), Evening Fyre Charred (ECV) and Evening Fyre Split (ESV) (logs sold separately). Each size comes in natural gas or propane, with a manual valve, an on/off remote ("12"), a variable-flame remote ("15") or the "01V" electronic variable remote. Models without a remote ("12M", "15M") accept a Real Fyre remote or wall switch later.
Key features
- Vent-free burner system. No chimney needed; nearly all the heat stays in the room.
- ODS safety pilot. Shuts the gas off before room oxygen drops below 18%.
- Six control choices. Manual, on/off remote, variable remote or electronic variable remote, with or without the remote kit.
- Complete fire bed included. Glowing Embers, Bryte Coals, Lava granules and decorative wood-chunk covers.
- Natural gas or propane. Factory built for one gas; not field convertible.
Included components
- G18 burner and grate with ODS pilot assembly and control valve
- Flex connector with adapter (3/8" O.D. x 30") and damper clamp (DC-1)
- Glowing Embers, Bryte Coals and Lava granules; two decorative wood-chunk covers
- Manual models: pressure regulator and piezo igniter
- "12"/"15" models: remote kit (receiver, transmitter, batteries) and heat shield (not with "12M"/"15M")
- "01V" models: control module/receiver and remote transmitter with batteries
Required components
- A Real Fyre Evening Fyre series vent-free log set in the matching size (sold separately): Evening Fyre (EFV), Evening Fyre Charred (ECV) and Evening Fyre Split (ESV)
- A solid-fuel masonry or UL-127 factory-built fireplace, or a listed ventless firebox, that meets the minimum dimensions below
- A gas supply with a shut-off valve, installed by a qualified gas professional
Control options
- Manual valve with ODS pilot: A manual control valve with pressure regulator and the ODS (oxygen depletion sensor) safety pilot, lit with the built-in piezo igniter and operated at the knob.
- On/off remote (12): Series "12" valve with an on/off toggle switch and a basic on/off remote (transmitter with 12V battery, receiver with 4 AA batteries). Can also be used with a Real Fyre wall switch or wall thermostat.
- On/off valve, remote not included (12M): The same series "12" on/off valve, supplied without the remote transmitter and receiver (R.H. Peterson book: "W/12M"). Add a Real Fyre remote or wall switch separately if wanted.
- Variable remote (15): Series "15" valve with ignition knob and a basic variable remote (12V transmitter battery, 4 AA in the receiver) to turn the fire on and off and raise or lower the flame.
- Variable valve, remote not included (15M): The same series "15" variable valve, supplied without the remote transmitter and receiver (R.H. Peterson book: "W/15M"). A Real Fyre variable remote (VR-1A / VR-2A) can be added separately.
- Electronic variable remote (01V): Series "01V" combination valve with on/off switch and electronic variable remote (9V transmitter battery, 4 AA in the control module). High and low flame settings from the remote.
Specifications
| Brand / series | Real Fyre by R.H. Peterson, G18 Series vent-free burner system (Evening Fyre) |
|---|---|
| Appliance type | Vent-free (unvented) gas log burner with ODS, ANSI Z21.11.2; also certified as a vented decorative appliance (ANSI Z21.60); logs sold separately |
| Low setting | Available on "15" and "01V" models only |
| Gas inlet pressure | Natural gas 5" to 10.5" w.c. (about 3.5" outlet on high); propane 11" to 13" w.c. (about 10" outlet) |
| Power | "15" remote: 12V transmitter battery, 4 AA in the receiver; "01V": 9V transmitter battery, 4 AA in the control module; manual valve needs no power |
| Room size | At least 50 cu ft of room volume per 1,000 BTU/hr (room volume x 20 = maximum BTU) |
| Ash lip | No more than 3/4"; glass doors fully open during operation |
| Clearances | Sidewalls 6" from the opening; ceiling 42" from the top of the opening; 12" noncombustible above the opening without a hood (10" with a hood); 12" noncombustible floor in front if the unit is within 6" of the floor |
| Elevation | Ratings to 2,000 ft; above that consult R.H. Peterson / the National Fuel Gas Code |
Sizes
| Burner | Log sets | Heat input NG (low/high) | Heat input LP (low/high) | Minimum fireplace (front x rear x depth x height) |
|---|---|---|---|---|
| G18-16/18 | 16/18" | 22,000 / 30,000 BTU/hr | 22,000 / 30,000 BTU/hr | 24" x 20" x 14" x 17" |
| G18-24/30 | 24" | 25,000 / 38,000 BTU/hr | 25,000 / 38,000 BTU/hr | 30" x 24" x 14" x 17" |
| G18-24/30 | 30" | 25,000 / 38,000 BTU/hr | 25,000 / 38,000 BTU/hr | 36" x 26" x 14" x 17" |
Installation and safety notes
This is a vent-free (unvented) decorative appliance with an oxygen depletion sensor (ODS) that shuts the burner off before the oxygen level in the room falls below 18%. Size the room before you buy: the room volume (length x width x height) multiplied by 20 is the maximum BTU input allowed, so a 36,000 BTU burner needs at least 1,800 cubic feet. Do not install in a bedroom or bathroom (units over 10,000 BTU/hr may not be installed in bedrooms), never leave it burning unattended or while anyone sleeps, and never burn wood or other solid fuel in the fireplace. Glass doors must be fully open during operation. Check local codes: some areas restrict or prohibit vent-free appliances. Input ratings apply up to 2,000 ft elevation.
Use only the gas type shown on the rating plate. Place the logs exactly as the Real Fyre log placement instructions show so no log touches the ODS pilot; main flames should rise about 5" to 8" above the front logs. A qualified technician should clean and inspect the burner and ODS pilot at least once a year. Install per the R.H. Peterson manual, local codes and ANSI Z223.1 / NFPA 54; in Massachusetts a licensed plumber or gas fitter must install it.
Safety warnings and disclaimer
WARNING: Burning natural gas or propane in this decorative appliance produces combustion byproducts, including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
DISCLAIMER: Flames and flame colors on the website may appear differently in real life.
Warranty summary
Real Fyre vent-free burners, valves and logs carry R.H. Peterson's limited warranty for the original purchaser; see the Real Fyre warranty page for current terms by component.
Manufacturer manuals and downloads
- G18 vent-free burner installation and owner's manual
- G18-2 see-thru vent-free burner installation and owner's manual
- Vent-free DOs and DON'Ts
- Real Fyre Vent-Free Catalog
Frequently asked questions — G18
Which logs fit the G18?
The Real Fyre Evening Fyre series: Evening Fyre (EFV), Evening Fyre Charred (ECV) and Evening Fyre Split (ESV), in 16/18" (G18-16/18 burner) or 24" and 30" (G18-24/30 burner).
Can I add a remote later?
Yes on "12M" and "15M" models, which are remote-ready; the manual-valve models cannot take a remote.
Loading component details…
Add to cart to see your price.

