Real Fyre G10 24/30" Vent-Free SS Burner G10-24/30-SS
SKU / Model: G10-24/30-SS
Base price$1,820.00
Early Black Friday Savings applied in your cart
Unlock an exclusive offer on this product.
Product overview
The Real Fyre G10 is R.H. Peterson's vent-free burner system featuring the I-2000 Plus burner, the burner behind Real Fyre's Charred Series vent-free log sets. It is ANSI certified with a pre-assembled control valve and ODS safety pilot, and it ships with a custom grate, connector kit, glowing embers, Bryte Coals and Lava-Fyre granules, so the fire bed is complete once you add the logs. This is the stainless steel version, built for outdoor fireplaces as well as indoor ones. R.H. Peterson permits the stainless G10 outdoors where it is not directly exposed to rain, precipitation or wind, and in certified R.H. Peterson / American Fyre Designs fireplaces; American Fyre Designs specifies the G10 stainless burner (up to 24/30" with the 24" log set) for its vent-free Phoenix, Grand Phoenix, Mariposa and Contractor's Model outdoor fireplaces.
This 24/30" burner is sized for Real Fyre G10 24" and 30" log sets: Charred Frontier Oak (CHFR), Charred Aged Split (CHAS), Charred Alpine Birch (CHAB), Charred Gnarled Split (CHGS) and Gnarled Oak (GNO) (logs sold separately). Choose natural gas or propane and the control you want, from a simple manual valve to an on/off remote, a variable-flame remote or the "01V" electronic variable remote.
Key features
- Vent-free I-2000 Plus burner. No chimney needed; nearly all the heat stays in the room.
- ODS safety pilot. Shuts the gas off before room oxygen drops below 18%.
- Stainless steel construction. For indoor fireplaces and protected outdoor fireplaces, including American Fyre Designs vent-free models.
- 6 control choices. Manual valve with ODS pilot, On/off remote (12), On/off valve, remote not included (12M), Variable remote (15), Variable valve, remote not included (15M), Electronic variable remote (01V).
- Complete fire bed included. Custom grate, glowing embers, Bryte Coals and Lava-Fyre granules.
- Natural gas or propane. Factory built for one gas; not field convertible.
Included components
- G10-24/30 vent-free burner with custom grate
- Pre-assembled control valve with ODS pilot and piezo igniter (manual, "12" and "15" valves)
- Flex connector with adapter and damper clamp
- Glowing embers (EM-10), Bryte Coals and Lava-Fyre granules
- Remote models: transmitter and receiver (not included with "12M" and "15M"); "01V": control module and receiver
- Decorative wood chip ("15" and "01V" models)
Required components
- A Real Fyre G10 vent-free log set in the matching size (sold separately): Charred Frontier Oak (CHFR), Charred Aged Split (CHAS), Charred Alpine Birch (CHAB), Charred Gnarled Split (CHGS) and Gnarled Oak (GNO)
- A fireplace that meets the minimum dimensions below (a solid-fuel fireplace, a listed vent-free firebox, or a certified R.H. Peterson / American Fyre Designs outdoor fireplace)
- A gas supply with a 1/2" minimum interior diameter line and a shut-off valve, installed by a qualified gas professional
Control options
- Manual valve with ODS pilot: A manual control valve with pressure regulator and the ODS (oxygen depletion sensor) safety pilot, lit with the built-in piezo igniter and operated at the knob.
- On/off remote (12): Series "12" valve with an on/off toggle switch and a basic on/off remote (transmitter with 12V battery, receiver with 4 AA batteries). Can also be used with a Real Fyre wall switch or wall thermostat.
- On/off valve, remote not included (12M): The same series "12" on/off valve, supplied without the remote transmitter and receiver (R.H. Peterson book: "W/12M"). Add a Real Fyre remote or wall switch separately if wanted.
- Variable remote (15): Series "15" valve with ignition knob and a basic variable remote (12V transmitter battery, 4 AA in the receiver) to turn the fire on and off and raise or lower the flame.
- Variable valve, remote not included (15M): The same series "15" variable valve, supplied without the remote transmitter and receiver (R.H. Peterson book: "W/15M"). A Real Fyre variable remote (VR-1A / VR-2A) can be added separately.
- Electronic variable remote (01V): Series "01V" combination valve with on/off switch and electronic variable remote (9V transmitter battery, 4 AA in the control module). High and low flame settings from the remote.
Specifications
| Model / MPN | G10-24/30-SS, G10-24/30-12-SS, G10-24/30-15-SS, G10-24/30-15M-SS, G10-24/30-01V-SS, G10-24/30P-SS, G10-24/30-12P-SS, G10-24/30-12MPSS, G10-24/30-15P-SS, G10-24/30-15MPSS, G10-24/30-01VPSS |
|---|---|
| Brand / series | Real Fyre by R.H. Peterson, G10 Series vent-free burner system (I-2000 Plus) |
| Appliance type | Vent-free (unvented) decorative gas log burner with ODS, ANSI Z21.11.2; stainless steel (logs sold separately) |
| Burner size | 24/30" (for 24" and 30" log sets) |
| Heat input | Natural gas 37,000 BTU/hr high, 19,000 low; propane 37,000 high, 19,000 low (low setting on "15" and "01V" models only) |
| Minimum fireplace | 24" log set: 28" front width, 20" rear width, 14" depth, 17" height; 30" log set: 34" front width, 20" rear width, 14" depth, 17" height. Ash lip or recess no more than 3/4" |
| Gas inlet pressure | Natural gas 5" to 10.5" w.c. (3.5" outlet); propane 11" to 13" w.c. (10" outlet) |
| Power | "12" and "15" remotes: 12V transmitter battery, 4 AA in the receiver; "01V": 9V transmitter battery, 4 AA in the control module; manual valve needs no power |
| Room size | Room volume (L x W x H) x 20 = maximum BTU allowed; e.g. 36,000 BTU needs 1,800 cu ft or more |
| Clearances | Sidewalls 6" from the fireplace opening; ceiling 42" from the top of the opening; 12" of noncombustible material above the opening without a hood (10" with a hood) |
| Elevation | Ratings to 2,000 ft; above that consult R.H. Peterson / the National Fuel Gas Code |
Installation and safety notes
This is a vent-free (unvented) decorative appliance with an oxygen depletion sensor (ODS) that shuts the burner off before the oxygen level in the room falls below 18%. Size the room before you buy: the room volume (length x width x height) multiplied by 20 is the maximum BTU input allowed, so a 36,000 BTU burner needs at least 1,800 cubic feet. Do not install in a bedroom or bathroom (units over 10,000 BTU/hr may not be installed in bedrooms), never leave it burning unattended or while anyone sleeps, and never burn wood or other solid fuel in the fireplace. Glass doors must be fully open during operation. Check local codes: some areas restrict or prohibit vent-free appliances. Input ratings apply up to 2,000 ft elevation.
Use only the gas type shown on the rating plate; the burner is not convertible. Place the logs exactly as the Real Fyre log placement instructions show so no log touches the ODS pilot or blocks a burner port. Outdoors, the stainless burner must be protected from direct rain and wind. Installation must follow the R.H. Peterson manual, local codes and ANSI Z223.1 / NFPA 54 (CSA B149.1 in Canada); in Massachusetts a licensed plumber or gas fitter must install it.
Safety warnings and disclaimer
WARNING: Burning natural gas or propane in this decorative appliance produces combustion byproducts, including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
DISCLAIMER: Flames and flame colors on the website may appear differently in real life.
Warranty summary
Real Fyre vent-free burners, valves and logs carry R.H. Peterson's limited warranty for the original purchaser; see the Real Fyre warranty page for current terms by component.
Manufacturer manuals and downloads
- G10 vent-free burner installation and operating instructions
- Vent-free DOs and DON'Ts
- Charred Frontier Oak / Charred Aged Split log placement (G10)
- Real Fyre Vent-Free Catalog
Frequently asked questions — G10-24/30-SS
Which logs fit this burner?
The Real Fyre G10 24" and 30" sets: Charred Frontier Oak (CHFR), Charred Aged Split (CHAS), Charred Alpine Birch (CHAB), Charred Gnarled Split (CHGS) and Gnarled Oak (GNO).
Do I need a chimney?
No. The G10 is vent-free, but the room must be large enough for the burner's BTU input and local codes must allow vent-free appliances.
Loading component details…
Add to cart to see your price.

