Real Fyre Charred Evergreen Split 18" G52 Gas Logs ENS-18
SKU / Model: ENS-18
Base price$633.00
Early Black Friday Savings applied in your cart
Unlock an exclusive offer on this product.
Product overview
Charred Evergreen Split Oak pairs the charred bark of the Evergreen Oak design with freshly split faces, so pale inner wood shows against the dark, burnt bark. Over the G52 Radiant Fyre burner it gives the look of a hand-split hardwood fire.
Real Fyre G52 logs are molded from R.H. Peterson's exclusive fiber-enhanced refractory ceramic mixture and handcrafted with high-definition bark and natural colors. Steel rods inside each log add reinforcement, and the refractory holds its strength at high temperature and keeps radiating heat after the burner is turned off.
The Charred Evergreen Split Oak set comes in 18", 24" and 30" sizes. It is sold as logs only and is made exclusively for the Real Fyre G52 Radiant Fyre burner system, so this page requires you to choose a matching G52 burner: pick the ignition system, the fuel and the burner, and they ship together with your logs.
Key features
- Charred Evergreen Split Oak design. Part of the Real Fyre Premier Series G52 Radiant Fyre collection.
- Fiber-enhanced refractory ceramic. Holds its strength at high temperature.
- High-definition bark and natural colors. Handcrafted for an authentic wood look.
- Steel reinforced. Steel rods inserted in each log.
- Radiant heat. The logs radiate heat while burning and after the set is turned off.
- Made for the G52 burner. Designed around the G52's three-tiered burner and stainless steel booster grid for a high, full-bodied flame.
Included components
- Charred Evergreen Split Oak gas logs for the size you choose (logs only, shipped in one box)
- Real Fyre log placement instructions
Required components
- A Real Fyre G52 Radiant Fyre burner in the matching size, selected on this page (required to complete your order). The G52 burner supplies the stainless steel booster grid, glowing embers and Bryte Coals used in the log placement.
- Indoors: a wood-burning (solid-fuel) fireplace of noncombustible construction with a working flue, a chimney at least 15 ft tall and room for the G52 minimum fireplace dimensions. Outdoors: an outdoor fireplace with a working flue built for a vented gas appliance (stainless G52-SS burners)
- A gas supply line with a shut-off valve outside the firebox, installed by a qualified gas professional
Specifications
| Brand / series | Real Fyre by R.H. Peterson, Premier Series G52 Radiant Fyre, Charred Evergreen Split Oak |
|---|---|
| Appliance type | Vented decorative gas log set (logs only; G52 burner sold separately and chosen on this page) |
| Models | ENS-18, ENS-24, ENS-30 |
| Compatible burners | Real Fyre G52 Radiant Fyre burner only: G52-18/20 for the 18" set, G52-24/30 for the 24" and 30" sets (match-lit, manual safety pilot, "17", "02" or "2VT" systems), or the G52 stainless steel outdoor burners G52-18/20-SS / G52-24/30-SS (match-lit or manual valve) |
| Fuel | Natural gas or propane, set by the burner you choose (match-lit is natural gas only) |
| Venting | Vented: for use only in a fireplace with a working chimney or flue; damper fully open with the burner's damper clamp installed |
| Warranty | Vented refractory gas logs for as long as the original purchaser owns them when used indoors, and 3 years when used outdoors |
Sizes and matched burners
| Size | Model | Compatible G52 burner | Burner heat input | Minimum fireplace (G52 manual) |
|---|---|---|---|---|
| 18" | ENS-18 | G52-18/20 (indoor) or G52-18/20-SS (outdoor stainless) | 46,000 BTU/hr NG; 36,000 BTU/hr LP | 28" front, 20" rear, 15" deep, 17" high |
| 24" | ENS-24 | G52-24/30 (indoor) or G52-24/30-SS (outdoor stainless) | 55,000 BTU/hr NG; 46,000 BTU/hr LP | 32" front, 24" rear, 15" deep, 17" high |
| 30" | ENS-30 | G52-24/30 (indoor) or G52-24/30-SS (outdoor stainless) | 55,000 BTU/hr NG; 46,000 BTU/hr LP | 34" front, 28" rear, 15" deep, 17" high |
Add 2" to the minimum front and rear width for "02" electronic systems. Each G52 burner page lists the full requirements from the R.H. Peterson G52 manual.
Installation and safety notes
Use only a Peterson Real Fyre G52 burner with this log set; any other burner can create a dangerous situation and voids listings, certifications and the warranty. Place every log exactly as shown in the Real Fyre log placement instructions (standard and stainless G52 burners use the same placement), keeping space between logs and never blocking burner ports or the pilot.
The chimney damper must stay fully open whenever the burner is lit. Never burn wood or other solid fuel in a fireplace fitted with a decorative gas appliance. Have the burner and gas line installed and checked by a qualified gas professional, following NFPA 54 or CSA B149.1 and local codes.
Safety warnings and disclaimer
WARNING: Burning natural gas or propane in this decorative appliance produces combustion byproducts, including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
DISCLAIMER: Flames and flame colors on the website may appear differently in real life.
Warranty summary
R.H. Peterson warrants Real Fyre vented products to the original purchaser, for products installed in the United States or Canada and operated and maintained as intended for single-family residential use (a copy of the sales slip is required as proof of purchase): vented refractory gas logs and Fyre Spheres for as long as the original purchaser owns them when used indoors, and 3 years when used outdoors; vented fiber-ceramic blended gas logs 5 years indoors and 3 years outdoors; indoor vented gas log burners and stainless steel burners (excluding controls) 10 years; outdoor vented stainless steel burners (excluding controls) 5 years; SPK-26 3 years; APK-17 (including the -17 valve) 2 years; all other valves, pilots and controls 1 year (excluding batteries).
Manufacturer manuals and downloads
- Charred Evergreen Split Oak log placement instructions (L-A2-444)
- G52 burner (valve systems) installation instructions
- G52 match-lit burner installation instructions
- G52 installation overview video
- Real Fyre Vented Gas Log Catalog
Frequently asked questions — Charred Evergreen Split Oak
Does this log set include a burner?
No. It is sold as logs only, and this page requires you to choose a G52 burner so your order arrives complete.
Can I use a different Real Fyre burner?
No. R.H. Peterson states these logs may be used only with the Real Fyre G52 burner.
Can it go outdoors?
Yes, with the stainless steel G52-SS burner in an outdoor fireplace built for a vented gas appliance. Refractory logs carry a 3-year warranty outdoors.
Loading component details…
Add to cart to see your price.

