Real Fyre Charred Frontier Oak 24" Vent-Free Logs CHFR-24
SKU / Model: CHFR-24
Base price$436.00
Early Black Friday Savings applied in your cart
Unlock an exclusive offer on this product.
Product overview
Charred Frontier Oak is a rugged, rustic oak set with deep charring and burnt ends, made for the G10 vent-free burner. It is the vent-free set American Fyre Designs pairs with the G10 stainless burner in its vent-free outdoor fireplaces.
Real Fyre logs are made by R.H. Peterson Co.: each log is individually crafted and hand painted, reinforced and made from a high-temperature material designed for repeated firing. Vent-free logs are engineered for the clean burn a vent-free burner requires, so only the burner R.H. Peterson lists for the set may be used.
The Charred Frontier Oak set is offered in 16/18", 24" and 30" sizes for the Real Fyre G10 vent-free burner. It is sold as logs only, so you choose the G10 burner (painted steel or stainless steel, natural gas or propane, manual valve or remote) right on this page and they ship together.
Key features
- Charred Frontier Oak design. Part of the Real Fyre Charred Series for the G10 vent-free burner.
- Individually crafted, hand-painted logs.
- Engineered for vent-free burning. Certified only with the G10 burner.
- Matched burner required. Choose a G10 or G10 stainless burner on this page.
- Log placement guide. Real Fyre publishes the exact placement for this design.
Included components
- Charred Frontier Oak vent-free gas logs for the size you choose (logs only)
- Log placement instructions
Required components
- A Real Fyre G10 vent-free burner in the matching size, selected on this page: G10-16/18 for the 16/18" set, G10-24/30 for the 24" and 30" sets (painted or stainless steel)
- A fireplace that meets the burner's minimum dimensions and a room large enough for the burner's BTU input
- A gas supply installed by a qualified gas professional
Specifications
| Brand / series | Real Fyre by R.H. Peterson, Charred Frontier Oak, G10 Series vent-free |
|---|---|
| Appliance type | Vent-free decorative gas log set (logs only; burner chosen on this page) |
| Models | CHFR-16/18, CHFR-24, CHFR-30 |
| Compatible burners | Real Fyre G10 vent-free burner (I-2000 Plus), painted or stainless steel, all controls |
| Fuel | Natural gas or propane, set by the burner you choose |
| Venting | Vent-free (unvented); can also be used in a vented fireplace per the G10 manual |
Sizes and matched burners
| Size | Model | Burner | Burner heat input (high) | Minimum fireplace |
|---|---|---|---|---|
| 16/18" | CHFR-16/18 | G10-16/18 or G10-16/18-SS | 35,000 NG / 32,000 LP BTU/hr | 22" front, 20" rear, 13" deep, 17" high |
| 24" | CHFR-24 | G10-24/30 or G10-24/30-SS | 37,000 NG / 37,000 LP BTU/hr | 28" front, 20" rear, 14" deep, 17" high |
| 30" | CHFR-30 | G10-24/30 or G10-24/30-SS | 37,000 NG / 37,000 LP BTU/hr | 34" front, 20" rear, 14" deep, 17" high |
Installation and safety notes
Place every log exactly as shown in the log placement instructions; logs must never touch the ODS pilot or block the burner ports. Never add extra logs or media that R.H. Peterson does not list.
This is a vent-free (unvented) decorative appliance with an oxygen depletion sensor (ODS) that shuts the burner off before the oxygen level in the room falls below 18%. Size the room before you buy: the room volume (length x width x height) multiplied by 20 is the maximum BTU input allowed, so a 36,000 BTU burner needs at least 1,800 cubic feet. Do not install in a bedroom or bathroom (units over 10,000 BTU/hr may not be installed in bedrooms), never leave it burning unattended or while anyone sleeps, and never burn wood or other solid fuel in the fireplace. Glass doors must be fully open during operation. Check local codes: some areas restrict or prohibit vent-free appliances. Input ratings apply up to 2,000 ft elevation.
Safety warnings and disclaimer
WARNING: Burning natural gas or propane in this decorative appliance produces combustion byproducts, including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
DISCLAIMER: Flames and flame colors on the website may appear differently in real life.
Warranty summary
Real Fyre vent-free burners, valves and logs carry R.H. Peterson's limited warranty for the original purchaser; see the Real Fyre warranty page for current terms by component.
Manufacturer manuals and downloads
- Charred Frontier Oak log placement instructions (G10)
- G10 vent-free burner instructions
- Vent-free DOs and DON'Ts
- Real Fyre Vent-Free Catalog
Frequently asked questions — Charred Frontier Oak
Does this log set include a burner?
No. It is logs only; this page requires you to choose a Real Fyre G10 burner so the order arrives complete.
Can I use it outdoors?
With the G10 stainless steel burner, in a protected outdoor fireplace such as an American Fyre Designs vent-free model.
Loading component details…
Add to cart to see your price.

