Modern Flames LPM 120" 5-Piece Trim Kit 02-00291-06
SKU / Model: 02-00291-06
Fireplace only$238.20
Early Black Friday Savings applied in your cart
Unlock an exclusive offer on this product.
Product overview
The Modern Flames 02-00291-06 five-piece trim kit finishes the exposed edges of a LPM-12016V2 fireplace. It gives a bay or corner installation a defined transition between the firebox and the surrounding wall finish.
The set contains long top and bottom pieces, two C-shaped end pieces and a short side trim. Choose the combination that matches a three-sided display or a left- or right-open corner.
Magnetic attachment makes the trim removable for access. Plan its space before finishing the wall so the pieces can fit against the fireplace without being trapped by adjacent surfaces.
Key features
- Exact V2 compatibility. The manufacturer identifies this kit specifically for LPM-12016V2.
- Five-piece set. Includes two C-shaped trims, a short side trim and two long top/bottom trims.
- Bay configuration. Use the top, bottom and both C-shaped pieces for a three-sided bay.
- Corner configuration. Use one C-shaped piece and the short side trim for a left- or right-open layout.
- Magnetic mounting. The trim pieces attach with magnets.
- Removable finish. The magnetic connection allows removal when access is needed.
- Drywall or wood finish. The guide accommodates finished material up to ¾ inch thick.
- Planned clearance. Allow the specified ¾-inch space at an adjacent wall for proper fit.
Compatibility
- Modern Flames Landscape Pro Multi V2 LPM-12016V2.
Included components
Five trim pieces: two C-shaped pieces, one short side piece, and two long pieces for the top and bottom. The fireplace is sold separately.
Required components
A LPM-12016V2 fireplace installed in a three-sided bay or left/right-open configuration. Plan finish thickness and the adjacent-wall gap before completing the wall.
Specifications
| Manufacturer | Modern Flames |
|---|---|
| Part number | 02-00291-06 |
| Compatible fireplace | LPM-12016V2 |
| Nominal fireplace size | 120 in |
| Kit quantity | 5 trim pieces |
| Configurations | Three-sided bay; left- or right-open corner |
| Attachment | Magnetic |
| Maximum finish thickness | ¾ in (19 mm) |
| Adjacent-wall trim space | ¾ in (19 mm) minimum per installation diagram |
| Fireplace included | No |
Installation and safety notes
Switch off and disconnect the fireplace before fitting the trim. Select the pieces for the chosen bay or corner arrangement; the five-piece kit provides alternatives, so each installation does not use every piece.
Follow the manufacturer's adjacent-wall diagram and leave at least ¾ inch (19 mm) for trim fit where shown. The kit accommodates drywall or wood up to ¾ inch (19 mm) thick. Keep the fireplace's required air openings and service access clear.
Safety warnings and disclaimer
INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
Warranty summary
Modern Flames publishes its limited-warranty terms in the warranty statement linked below. Coverage is subject to its original-purchaser, authorized-dealer and installation conditions.
Manufacturer manuals and downloads
- Landscape Pro Multi V2 five-piece trim compatibility and installation guide
- Modern Flames model and accessory compatibility guide
- Modern Flames limited warranty statement
Frequently asked questions — 02-00291-06
Does it fit an original Landscape Pro Multi?
The manufacturer's fit list specifies LPM-12016V2. Compatibility with the original non-V2 model is not established by that list.
Are all five pieces used at once?
No. A bay installation uses the top, bottom and two C-shaped trims; a corner uses the top, bottom, one C-shaped trim and the short side piece.
How does the trim attach?
The pieces are held in place by magnets.
How much space is needed beside an adjacent wall?
The manufacturer's diagram requires at least ¾ inch (19 mm) for proper trim fit at the adjacent wall.
Loading component details…
Add to cart to see your price.
