Firegear Sanctuary 1-56 GFRC Gas Fire Table SAN130LH

SKU / Model: SAN130LHMTNAR

Free Fast Shipping
In-stock items are processed in 1–2 business days.

$3,059.00

YOUR SPECIAL OFFER IS AVAILABLE

This product qualifies for an exclusive special offer.

Complete your selections and add this product to your cart to unlock the eligible offer.

Offer eligibility and final promotional pricing are confirmed in the cart. Accessories qualify separately. Offers may change.

Product overview

The Sanctuary 1-56 is a 56" rectangular gas fire table cast in high-strength glass fiber reinforced concrete (GFRC), paired at the factory with a complete Firegear stainless steel linear burner system. Its clean, low profile and four natural concrete colors (Arctic, Chocolate, Raven and Slate) suit modern patios, pool decks and rooftop terraces, and the wide ledge gives room to set down a drink.

Choose the ignition that fits your space: Match Throw (MT) key-valve lighting for the simplest install, TPSI with a thermocouple safety pilot and battery spark igniter, or AWS fully electronic ignition with automatic relight. Each table ships with a Firegear deluxe weather cover.

Key features

  • 56" x 38" x 16" H GFRC fire table in Arctic, Chocolate, Raven or Slate.
  • Stainless steel 32-3/4" x 12-3/4" flat linear pan with 27" x 6" H burner, factory installed.
  • Ignition choices: MT match throw (100,000 Btu NG), TPSI battery spark with thermocouple safety (75,000 Btu) or AWS electronic ignition (75,000 Btu, 120 VAC).
  • Deluxe weather cover included.
  • Natural gas, or propane on TPSI models; MT and AWS models convert to LP with Firegear kits.

Specifications

Models / MPN MT: SAN130LHMTN + color; TPSI: SAN130LHTPSI + color (NG) / + color + P (LP); AWS: SAN130LHAWSN + color. Colors: AR Arctic, CH Chocolate, RA Raven, SL Slate
Table dimensions 56" L x 38" W x 16" H
Burner opening (inside) 33-1/2" x 13-1/2"
Table weight 350 lb without media or burner (manual)
Burner system LOF3313FH series: 32-3/4" x 12-3/4" stainless flat pan, 27" x 6" H burner
Heat input MT 100,000 Btu/hr NG; TPSI 75,000 Btu/hr NG or LP; AWS 75,000 Btu/hr NG
Gas connection 3/8" male flare at the primary shutoff; 3/8" flex lines
Inlet pressure NG 5.0-10.5" WC (7.0" normal); LP 10.5-13.0" WC (11.0" normal)
Electrical MT none; TPSI battery spark igniter; AWS 120 VAC GFCI with 30 VDC power supply
Clearances 16" to combustible side walls; 69" to combustible ceiling
Media 1"-2" lava rock or 1/2"-3/4" fire glass (manual table: about 17 lb lava rock or 27 lb glass); sold separately
Elevation 0-4,500 ft; derate 4% per 1,000 ft above

Included components

GFRC fire table, factory-installed stainless burner system with the selected ignition, flex gas line and deluxe weather cover. AWS models include the 30 VDC power supply.

Required components

Lava rock or fire glass media; a gas supply with shutoff sized per NFPA 54; a 120 VAC GFCI circuit for AWS models. Propane tanks must sit at least 60" from the table in a separate enclosure.

Optional accessories

OASLPK35 LP conversion kit (MT models), Sanctuary LP tank enclosure, Firegear lava stones and fire glass.

Installation and safety notes

Outdoor use only. Set the table on a level, non-combustible surface, never on grass, dirt or rocks. Keep the pilot hood completely free of media and do not cover the burner more than 1" above the ports. Do not operate in high winds or below 32°F. Clean GFRC with water and a soft brush (no pressure washing, acids or abrasives) and reseal every 4-5 years. After rain, light the fire and watch from a distance for at least 30 minutes.

Safety warnings and disclaimer

WARNING: This product can expose you to chemicals including carbon monoxide and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.

INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.

DISCLAIMER: Flames and flame colors on the website may appear differently in real life.

Warranty summary

Covered by the Firegear limited warranty; tampering or modification voids coverage. See Firegear warranty information.

Manufacturer manuals and downloads

Loading component details…

Call for best price