Firegear

Firegear Kalea Bay 72" Outdoor Gas Fireplace OFP72LECO

SKU / Model: OFP72LECONLED

Free Fast Shipping
In-stock items are processed in 1–2 business days.

$6,599.00

YOUR SPECIAL OFFER IS AVAILABLE

This product qualifies for an exclusive special offer.

Complete your selections and add this product to your cart to unlock the eligible offer.

Offer eligibility and final promotional pricing are confirmed in the cart. Accessories qualify separately. Offers may change.

Product overview

The Kalea Bay 72" is the largest of Firegear's built-in outdoor linear gas fireplaces, sized for long outdoor-room walls, pavilions and outdoor kitchens. Its 72" wide by 16" tall opening carries a six-foot ribbon of flame over fire glass, in a firebox and burner made entirely of #304 stainless steel.

The 72" model comes with full-spectrum RGB LED lighting under the glass, so the bed can glow in color with or without the flame. Its Ecoflow valve system uses 120-volt electronic ignition with auto-relight, and the control center provides on/off, high/low flame, continuous pilot and LED color control. A tempered glass windshield and stainless hood finish the opening.

Kalea Bay frames into non-combustible metal studs with just 6" of side clearance, needs no hearth extension and ships with its stainless vent kit. The optional 78008 kit turns it into a see-through fireplace.

Key features

  • #304 stainless steel firebox and burner.
  • RGB LED lighting beneath the fire glass, usable with or without the flame.
  • Electronic ignition with auto-relight (120 VAC).
  • 65,000 Btu/hr high / 42,000 Btu/hr low on natural gas.
  • Tempered glass windshield and stainless hood included.
  • See-through ready with kit 78008.
  • Natural gas or propane; natural gas units are field convertible to propane.

Specifications

Models / MPN OFP72LECONLED (OFP-72LECO-NLED, natural gas); OFP72LECOPLED (OFP-72LECO-PLED, propane)
Viewing opening 72" W x 16" H
Overall dimensions 76" W x 33-1/2" H x 16-1/4" D; leg height 11-1/2"; valve box depth 10-1/4"
Framing (metal studs only) 76-1/2" W x 33-3/4" H x 15-3/4" D single-sided; 15" D see-through
Heat input, natural gas 65,000 Btu/hr high / 42,000 Btu/hr low
Heat input, propane 60,000 Btu/hr high / 45,000 Btu/hr low (per manual)
Ignition Ecoflow valve system, electronic ignition with auto-relight
Electrical 120 VAC GFCI outlet in a weatherproof box; 7.5 VDC valve adapter and 12 VDC LED adapter supplied
Gas connection 1/2" stainless flex line (46") and 1/2" flare shutoff supplied; 3/4" black iron supply recommended
Inlet pressure NG 5.0-10.5" WC (7.0" normal), manifold 4.0" WC; LP 10.5-13.0" WC (11.0" normal), manifold 10.0" WC
Clearances Side wall 6" (36" see-through); ceiling 46-1/2"
Enclosure ventilation 18 sq in cross ventilation per side; VENT-6X12SS kit included
Media About 25 lb of 1/2"-3/4" fire glass (sold separately)
Elevation 0-4,500 ft; derate 4% per 1,000 ft above
Certification ANSI Z21.97-2017 / CSA 2.41

Included components

Fireplace with stainless firebox and burner, tempered glass windshield and fasteners, stainless hood, RGB control box and LED harnesses, 7.5 VDC gas valve adapter, 12 VDC LED adapter, ignition screen and pilot hood, 1/2" connector valve, 46" flex line and VENT-6X12SS vent kit.

Required components

Fire glass media (about 25 lb), a non-combustible metal-stud and cement-board enclosure with 18 sq in of cross ventilation per side, a 120 VAC GFCI outlet in a weatherproof box, and a gas supply sized per NFPA 54.

Optional accessories

OFP72COV stainless weather cover, 78008 LED see-through conversion kit, OFP72LECOLPK propane conversion kit (natural gas units), and Firegear wireless remote and wall-switch controls.

Installation and safety notes

Outdoor use only, on a flat, level, non-combustible surface. Frame with metal studs and cement board only; wood studs are not permitted. Provide drainage so water never reaches the valve, never install below grade, and leave the cavity around the valve box open. Cut a 6" x 5-1/2" opening in the cement board for the RGB control box. Gas lines must run inside the non-combustible structure and be leak tested. Remove any combustible cover before lighting, never leave the fire unattended, and after rain light the fire and watch from a distance for at least 30 minutes while the glass dries.

Safety warnings and disclaimer

WARNING: This product can expose you to chemicals including carbon monoxide and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.

INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.

DISCLAIMER: Flames and flame colors on the website may appear differently in real life.

Warranty summary

Covered by the Firegear limited warranty; modification or inadequate enclosure ventilation can void coverage. See Firegear warranty information.

Manufacturer manuals and downloads

Loading component details…

Call for best price