Challenger 36" Gas Grill Base Cabinet OGGB-363528-SHK
SKU / Model: OGGB-363528-ANT-SHK
Base price$2,208.00
Unlock an exclusive offer on this product.
Overview
A 36-inch gas grill base cabinet that turns a built-in grill head into a finished outdoor kitchen. The cabinet is built to your grill manufacturer's cutout specifications, with a 12" appliance skirt, two doors for under-grill storage and venting in the floor and back panel for safe operation of the grill above.
Challenger Designs cabinets are built from rust-proof, powder-coated aluminum in Nappanee, Indiana, and arrive fully assembled. They will not warp or rot, and they pair with the other Challenger modules to build a custom outdoor kitchen around your grill, refrigerator and sink.
Order it with your grill's make and model and Challenger Designs builds the cutout to that grill's specifications, with a 12" appliance skirt and venting in the floor and back panel. The base does not hold an LP tank, so pair it with the 21" pull-out propane cabinet OPC-213528 or run natural gas to the grill. This Shaker Door version is offered in Anthracite and Textured White. Top it with a Challenger aluminum or stainless countertop (1.25" thick), or with granite or concrete. Each cabinet carries the Challenger Designs Limited Lifetime Warranty when registered within 30 days of purchase.
Key features
- Built to the grill manufacturer's cutout specifications (specify grill make and model when ordering)
- 12" tall appliance skirt
- 2 doors below the grill
- Vented in floor and back panel
- Does not accommodate an LP tank (use a pull-out propane cabinet or natural gas)
- Shaker Door style
- Rust-proof, powder-coated aluminum construction built to order in Nappanee, Indiana
- Ships fully assembled, like an interior kitchen cabinet, for quick installation
- Finished back panel at no additional cost; prepped for the countertop of your choice (aluminum, stainless, granite or concrete)
- 304 stainless steel 9" pulls and 304 stainless steel adjustable 4" legs
- Gasketed, weather-resistant doors and drawers
Specifications
| Model | OGGB-363528-[color]-SHK |
|---|---|
| Unit dimensions | 36" W x 35" H x 28" D (nominal) |
| Cutout dimensions | Cut at the factory to the grill manufacturer's cutout specifications for the make and model given when ordering; 12" appliance skirt. The cabinet ships fully assembled, so no framing is required |
| Viewing area | Not applicable (outdoor kitchen cabinet) |
| Clearances to combustibles | Not applicable to the cabinet itself (aluminum, no heat source); the grill installed in it sets the clearances to combustibles |
| Construction | Powder-coated aluminum, fully assembled |
| Door style | Shaker Door |
| Hardware | 304 stainless steel 9" pulls; 304 stainless steel adjustable 4" legs |
| Cabinet colors offered here | Anthracite, Textured White |
| Warranty | Challenger Designs Limited Lifetime Warranty (product must be registered with Challenger Designs within 30 days of purchase). |
Included components
- One fully assembled 36" gas grill base cabinet, OGGB-363528-[color]-SHK
- Two doors below the grill, with venting in the floor and back panel
- Finished back panel
- 304 stainless steel 9" pulls
- 304 stainless steel adjustable 4" legs
Required components
- Countertop, sold separately: Challenger aluminum ACT-30 or stainless SST-30 (30" deep, 1.25" thick, sold per inch), or granite or concrete
- Built-in gas grill head (sold separately); the cutout is made to its specifications
- Natural gas line, or a 20 lb LP tank stored in a separate propane cabinet
Optional accessories
- Challenger 21" pull-out propane tank cabinet OPC-213528 (slide-out tray for a 20 lb LP tank)
- Challenger Designs toe kick 17TK-94W (94" powder-coated aluminum) or 17TK-28W (25.5")
- Toe kick extensions TKE-2, TKE-3 and TKE-4 (2", 3" and 4" x 94")
- End panels EP-28D and EP-28D-P (pan door style), 35" H x 28" D
- Base filler panels FP-31X3 (3" W x 31" H) and FP-31X6 (6" W x 31" H)
Downloads
- Challenger Designs 2026 Outdoor Kitchen Catalog (PDF)
- Outdoor Kitchen Installation Instructions (PDF)
- Warranty Policy and Procedures (PDF)
Installation & safety notes
Install the cabinet level on its adjustable legs and secure it to adjoining cabinets as described in the Challenger Designs installation instructions. Grill, side burner, sink and gas connections must follow the appliance manufacturer's instructions and local codes. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
Frequently asked questions — Challenger Designs 36" Gas Grill Base Cabinet OGGB-363528-SHK
How big is it?
Nominal 36" W x 35" H x 28" D (the 363528 in the model number). It stands on 304 stainless steel adjustable 4" legs.
Will my grill fit?
Yes, if it is a built-in grill head: the cabinet is built to your grill manufacturer's cutout specifications, so you give the grill make and model when ordering. It has a 12" appliance skirt and two doors below the grill.
Can it hold a propane tank?
No. The grill base does not accommodate an LP tank. Use natural gas, or keep a 20 lb tank in the Challenger 21" pull-out propane cabinet OPC-213528.
Which colors and door options are there?
This Shaker Door version is offered in Anthracite and Textured White. A Standard Flat-Panel Door version, OGGB-363528-PAN, is also sold.
Is a countertop included?
No. The countertop is sold separately: aluminum, stainless, granite or concrete. Challenger's aluminum ACT-30 and stainless SST-30 countertops are 30" deep, 1.25" thick and sold per inch, with a 1" overhang on every side not against a wall.
What's the warranty?
The Challenger Designs Limited Lifetime Warranty. Register the cabinet with Challenger Designs within 30 days of purchase.
Loading component details…
