Barbara Jean 72" See-Through Outdoor Fireplace OFP7972S2
SKU / Model: OFP7972S2N
Fireplace only$7,842.45
Early Black Friday Savings applied in your cart
Unlock an exclusive offer on this product.
Product overview
The Barbara Jean OFP7972S2 is a 72-inch see-through outdoor linear gas fireplace that puts a long, clean ribbon of flame into a patio wall, outdoor kitchen island or covered terrace. It is open on both faces, so one fire can be enjoyed from two outdoor spaces, such as a dining patio on one side and a lounge on the other. The 78-15/16 in. wide opening shows the fire through a stainless steel firebox with a satin-coat outer wrap, and the flame dances over ember glass, driftwood, stones or cannonballs.
Heat output reaches 120,000 BTU/h on natural gas (117,000 BTU/h on the IPI version), enough to take the chill off an evening outdoors. Choose the millivolt valve with a piezo igniter, which needs no electricity, or IPI Proflame 2 with a remote for flame height and multi-color LED accent lighting. Every unit ships for natural gas and converts to propane with a Barbara Jean kit.
Certified in the USA and Canada as an outdoor decorative gas appliance and crafted entirely in Canada, it suits homeowners and builders who want a modern, architectural outdoor fire with views from both sides.
Key features
- Size: 72-inch linear burner (OB72) with a 78-15/16 in. wide fireplace opening.
- Configuration: See-through: open on both faces.
- Heat output: Up to 120,000 BTU/h on natural gas (millivolt); IPI 117,000 BTU/h.
- Two valve systems: Millivolt with piezo igniter (OFP7972S2N) or IPI Proflame 2 (OFP7972S2P2).
- Remote control: Included with IPI Proflame 2 models; adjusts flame height and the LED accent lighting (3 AAA batteries).
- Multi-color LED accent lighting: IPI models: white, yellow, red, purple, blue and green.
- Stainless steel construction: Stainless firebox with a satin-coat outer wrap.
- Glass wind guard: Shields the flame from wind; it must be installed for safe operation.
- Zero clearance to standoffs: 0 in. at top, sides and back; framing is optional.
- Media choices: Ember glass in five colors, plus optional driftwood logs, rocks, stones and cannonballs.
- Propane ready: Ships natural gas; converts with 72OB-CKLP (millivolt) or 72OB-CKLP2 (IPI).
- Certified: ANSI Z21.97-2017 / CSA 2.41-2017 for the USA and Canada; made in Canada.
Specifications
| Model / MPN | OFP7972S2N (millivolt, piezo), OFP7972S2P2 (IPI Proflame 2 with LED) |
|---|---|
| Brand | Barbara Jean Collection |
| Type | See-through outdoor linear gas fireplace, 72 in. burner |
| Unit dimensions | 93-1/4 in. W x 35-1/2 in. H x 18-7/8 in. D (manual 43OFP-MAN17; brochure B0503 dimension table) |
| Framing dimensions | No rough opening is published; framing is optional (1/2 in. plywood exterior facing, non-combustible header panel, fastened by the nailing tabs) and the unit has 0 in. clearance to its standoffs at top, sides and back (manual pp.14-15) |
| Viewing area | 78-15/16 in. W x 16-5/16 in. H fireplace opening on each face |
| Clearances to combustibles | 0 in. at top, sides and back (standoffs); 36 in. clear in front of each face; side walls at least 8-1/2 in. from each side of the opening; ceiling at least 61 in. above the bottom of the unit (35 in. above the top of the opening); mantel bottom at least 35-1/2 in. above the bottom of the unit, 45-1/2 in. for a 10 in. deep mantel; alcove at least 96 in. wide and 36 in. deep; 47 in. to an overhang or soffit above (60 in. if vinyl-clad); 12 in. from the wind guard to combustibles (manual 43OFP-MAN17 pp.8, 15) |
| Fuel | Natural gas as shipped; propane with conversion kit |
| BTU input, millivolt | Natural gas 83,000 low / 120,000 high BTU/h; propane 91,000 low / 115,000 high BTU/h |
| BTU input, IPI | Natural gas 117,000 (single rate) BTU/h; propane 115,000 (single rate) BTU/h |
| Ignition | Millivolt valve with piezo igniter, or IPI Proflame 2 (intermittent pilot) |
| Venting | None: outdoor decorative appliance for open-air installation only |
| Gas inlet | 1/2 in. NPT |
| Supply pressure | Natural gas 5.5 in. min / 7 in. normal / 10 in. max w.c.; propane 11 in. min / 11 in. normal / 13 in. max w.c. |
| Manifold pressure | Natural gas 1.6 in. low / 3.5 in. high w.c.; propane 6.3 in. low / 10 in. high w.c. |
| Electrical | Millivolt: none. IPI: three-prong grounded plug into a GFCI-protected outdoor outlet near the fireplace |
| Glass media required | 8 bags x 5 lb (40 lb), no more than 1 in. above the burner tray |
| Altitude | Rated 0-4,500 ft; derate 4% per 1,000 ft above 4,500 ft |
| Shipping weight | 285 lb |
| Certification | ANSI Z21.97-2017 / CSA 2.41-2017, outdoor use only (USA and Canada) |
Included components
- 72-inch see-through stainless steel fireplace with satin-coat outer wrap
- 72-inch linear burner with the selected valve: millivolt with piezo igniter (OFP7972S2N) or IPI Proflame 2 (OFP7972S2P2)
- Glass wind guard (72G-101 panel, 5-1/2 x 76-3/16 in.), listed as included in the Barbara Jean price list
- Adjustable support guides (not load-bearing)
- Proflame 2 remote control and multi-color LED accent lighting (IPI models only)
- Installation and operating manual 43OFP-MAN17
Required components
- Ember glass media, 8 bags x 5 lb: MQG5A cobalt blue, MQG5W white, MQG5C bronze, MQG5ZG zircon glacier ice or MQG5B black
- 72OB-CKLP propane conversion kit (millivolt models, propane only)
- 72OB-CKLP2 propane conversion kit (IPI models, propane only)
- GFCI-protected outdoor outlet near the fireplace (IPI models only)
- A solid non-combustible base under the unit, such as ledge stone (the support guides are not load-bearing)
Optional accessories
- Two OFP79SS stainless steel surrounds, one per face (19-1/4 x 82 in. outside each)
- OFP79WC stainless steel weather cover
- OFP79SC safety screen barrier
- OFP42SA spark assist for the millivolt valve (uses one AA battery, not included)
- MQRBD3 driftwood log set, 5 pieces
- MQRBD4 driftwood log set, 3 pieces
- MQROCK2 contemporary rock set, natural
- MQSTONE decorative stones, 80 pieces
- MQSTONE10 decorative stones, 10 pieces
- RBCB1 cannonballs, 14 pieces
- 27FP-900FF LP regulator and 5 ft hose
Product video
Installation and safety notes
⚠ Important: Improper installation, adjustment, service or maintenance can cause fire, explosion or carbon-monoxide exposure. This outdoor fireplace must be installed and serviced by a qualified professional following manual 43OFP-MAN17. Keep children and pets away from the hot surfaces, and use it outdoors only.
Before you begin
- Paint cures on first use: run four 10-minute firings with a 5-minute cool-down between them, keeping children, pregnant people and pets away (p.2).
- Some odor is normal at first and can last up to 40 hours of burn time; popping or ticking is metal expanding and cooling (p.2).
- Wait at least 60 seconds after shutting off before relighting (p.2).
Product & safety information
- Certified to ANSI Z21.97-2017 / CSA 2.41-2017 as an outdoor decorative gas appliance (p.1).
- Not for use below freezing. Wind strongly affects flame performance (p.2).
- Do not use it as a drying rack, and do not use it if any part has been under water (p.5).
Location & enclosures
- Never install it inside or through an exterior wall; it may be installed against the outside of one (p.8).
- Allowed: open-air walls with no roof (96 sq ft minimum and a ground-level opening); a roof with no more than two side walls; or a roof with three side walls if at least 30% of the perimeter stays permanently open (pp.7-8).
- Screened porch: at least 96 sq ft with two sides fully open, or screened walls with at least 64 sq ft of screen (p.7).
- Under a veranda, porch, deck or overhang: 47 in. clearance, only when fully open on at least two sides; vinyl is not allowed (p.8).
- Windows and doors 12 in. away (36 in. for vinyl); air inlets 9 in. (USA) / 12 in. (Canada) away; 54 in. above a public paved sidewalk or driveway (p.8).
Handling, support & framing
- The unit is extremely heavy: use the hand/2x4 cutouts or the crane lift tabs (p.12).
- The support guides are not load-bearing; support the bottom on a non-combustible base such as ledge stone (p.13).
- Optional framing: 1/2 in. plywood exterior facing with a non-combustible header panel; fold the standoffs out and fasten through the nailing tabs (p.14).
- Cover the sides and top of each front face with non-combustible material only (brick, stone, tile or concrete board), and do not insulate around the unit (pp.2, 15).
Gas line & LP enclosures
- Gas inlet 1/2 in. NPT; natural gas supply 5.5-10 in. w.c., propane 11-13 in. w.c. (p.30).
- LP cylinder enclosures need open sides or vents (1 sq in per lb of fuel near the top, 1/2 sq in per lb at floor level), a floor at least 2 in. above ground and a non-locking door (p.6).
Surrounds, covers, screens & wind guard
- The OFP79SS surround measures 19-1/4 x 82 in. outside; leave at least 1/8 in. between finishing materials and the surround (p.16).
- The wind guard glass must be installed for safety and for the unit to work properly (p.20).
- Cover the pilot to protect it from the weather when not in use (p.2).
Media
- 40 lb of ember glass (8 bags), no higher than 1 in. above the burner tray; keep the pilot area uncovered (pp.23-24).
- Never cover the burner tube with cannonballs or other media; use only Barbara Jean approved media (p.24).
Lighting & controls
- Millivolt models light with the piezo igniter; the OFP42SA spark assist is an optional add-on (pp.27-28, 45).
- IPI models use the Proflame 2 control: plug into a grounded GFCI outdoor outlet near the fireplace; the remote uses 3 AAA batteries (pp.39-41).
Gas specifications & LP conversion
- Ships as natural gas; convert with 72OB-CKLP (millivolt) or 72OB-CKLP2 (IPI), each with a regulator (pp.30-31).
- Orifices are sized for 0-4,500 ft; above that, derate 4% per 1,000 ft (p.30).
Maintenance
- Wash stainless surfaces every 3-4 weeks with fresh water or stainless cleaner, wiping with the grain; no abrasive cleaners or steel wool. Golden or brown heat tint is normal (p.21).
- Plan for drainage: rust from poor drainage is not covered by the warranty (p.2).
Building code information
- Gas: local codes or, where none apply, the National Fuel Gas Code, ANSI Z223.1/NFPA 54 in the USA, or CSA B149.1 (Natural Gas and Propane Installation Code) in Canada
- Propane storage and cylinders: CSA B149.2 (Propane Storage and Handling Code); cylinders built to U.S. DOT specifications or CAN/CSA-B339
- Electrical (IPI models): National Electrical Code, ANSI/NFPA 70 in the USA, or CSA C22.1 (Canadian Electrical Code)
- Certification standard: ANSI Z21.97 / CSA 2.41 (outdoor decorative gas appliances)
Warranty
- Barbara Jean Collection limited warranty, manual 43OFP-MAN17 p.47.
- Burner: 5 years.
- Gas valves, thermocouples, igniters, lights and media: 1 year.
- Coverage area: continental USA, Alaska, Hawaii and Canada, only while the unit stays at its original installation site.
- Conditions: installed and operated as the printed instructions and codes require; proof of the installation date is needed (otherwise the date of manufacture plus 30 days applies).
- Not covered: labor, freight and handling; accident, misuse, flood or acts of God; corrosive atmospheres; alterations; faulty installation or lack of maintenance; fuel or electricity costs; cosmetic damage such as scratches, dents and heat discoloration.
Downloads
- Outdoor Linear Fireplace installation and operating manual 43OFP-MAN17 (Aug 20, 2024)
- Barbara Jean Linear Fireplaces brochure B0503 (03/2026)
- OFP7972 S2 CAD dimension drawing (DXF, ZIP)
- Barbara Jean warranty page
California Proposition 65
WARNING: This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Flames and flame colors on the website may appear differently in real life.
Please follow the manufacturer's installation instructions exactly. Improper installation can cause fire, property damage or injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
Frequently asked questions — OFP7972S2
What size is the OFP7972S2 and does it need framing?
The unit measures 93-1/4 in. W x 35-1/2 in. H x 18-7/8 in. D, with a 78-15/16 x 16-5/16 in. opening. Framing is optional: it has 0 in. clearance to its standoffs at top, sides and back, with 36 in. clear in front and side walls at least 8-1/2 in. from the opening.
Can it go under a covered patio?
Yes, when the space stays open enough: a roof with no more than two side walls, or three side walls with at least 30% of the perimeter permanently open. Keep 47 in. to an overhang above, never vinyl, and never install it inside or through an exterior wall.
Can it run on propane?
Yes. It ships for natural gas and converts with the 72OB-CKLP kit (millivolt) or 72OB-CKLP2 kit (IPI). Propane input peaks at 115,000 BTU/h.
Does it work in a power outage?
The millivolt version lights with a piezo igniter and needs no electricity. The IPI Proflame 2 version plugs into a GFCI-protected outdoor outlet.
Is a remote included?
Yes on the IPI Proflame 2 models: the remote sets flame height and the multi-color LED accent lighting and uses 3 AAA batteries. The millivolt models have no remote.
How much glass media do I need, and what's the warranty?
8 bags of 5 lb ember glass (40 lb), no more than 1 in. above the burner tray. The burner is warranted for 5 years; valves, thermocouples, igniters, lights and media for 1 year.
Loading component details…
Add to cart to see your price.
