Aspire by Hestan Sear Burner Kit AECK-SB
SKU / Model: AECK-SB
Grill only$299.00
Unlock an exclusive offer on this product.
The Aspire by Hestan AECK-SB is the sear burner conversion kit for Aspire grills. It replaces one of the grill's stainless U-burners with an infrared sear burner, so you can add a high-heat searing zone to a grill that was bought with U-burners only.
The sear burner drops into the position of the burner it replaces, seated on the existing valve and orifice and aligned to the rear firebox wall. It works on natural gas and propane grills: propane grills get the new LP orifice supplied with the kit, natural gas grills keep the orifice they have.
The kit fits the all-U-burner Aspire grill heads EAB30, EABR30, EAB36, EABR36, EAB42 and EABR42. The EMB and EMBR models already come with a factory sear burner. Hestan specifies that the conversion be done by a qualified service technician.
Key features
- Infrared sear burner that replaces one U-burner
- Fits the all-U-burner Aspire grill heads (EAB and EABR models)
- Natural gas or propane; LP orifice supplied with the kit
- Installs in the existing burner position on the original valve and orifice
- No radiant tray is used over the sear burner
Specifications
| Model | AECK-SB |
|---|---|
| Brand | Aspire by Hestan |
| Type | Infrared sear burner conversion kit |
| Fits | Aspire by Hestan EAB30, EABR30, EAB36, EABR36, EAB42, EABR42 (all-U-burner models), natural gas or propane |
| Fuel | Natural gas or propane (LP orifice included) |
Fits
- Aspire by Hestan EAB30, EABR30, EAB36, EABR36, EAB42, EABR42 (all-U-burner models), natural gas or propane
- Not needed on EMB36, EMBR30, EMBR36 or EMBR42, which have a factory sear burner
Installation & safety
⚠ Important: If the instructions are not followed exactly, a fire or explosion may result. The conversion must be done by a qualified service technician, with the grill completely cool and the gas supply and electrical power disconnected.
- Burner removal: take out the U-burner in the position being converted.
- Changing orifices (LP units only): fit the LP orifice supplied with the kit.
- Sear burner installation: seat the burner fully on the valve and orifice and align its rear bracket hole with the dimple in the rear firebox wall (or 1.25" vertical distance where there is no dimple). Do not install a radiant tray over the sear burner.
- Testing and adjustment: leak-test every connection and check the burner and valve adjustment.
Downloads
Follow the manufacturer's installation instructions exactly. Improper installation, adjustment, alteration or maintenance can cause fire, property damage or injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
California Proposition 65
WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Frequently asked questions — AECK-SB
Which grills does the AECK-SB fit?
The all-U-burner Aspire grill heads: EAB30, EABR30, EAB36, EABR36, EAB42, EABR42, on natural gas or propane.
What does it replace?
One stainless U-burner. The sear burner sits in that burner position on the existing valve and orifice, and no radiant tray goes over it.
Does it work on propane?
Yes. Propane grills use the new LP orifice supplied with the kit; natural gas grills keep their existing orifice.
Who should install it?
Hestan specifies a qualified service technician, with the grill cool and the gas and electrical supply disconnected.
Loading component details…
