American Outdoor Grill 24" ADA In-Ground Post Base AOG24-GA

SKU / Model: AOG24-GA

Free Fast Shipping
In-stock items are processed in 1–2 business days.

$1,033.00

YOUR SPECIAL OFFER IS AVAILABLE

This product qualifies for an exclusive special offer.

Complete your selections and add this product to your cart to unlock the eligible offer.

Offer eligibility and final promotional pricing are confirmed in the cart. Accessories qualify separately. Offers may change.

The American Outdoor Grill AOG24-GA is an in-ground post base, accessible height (32"), for any AOG 24" grill head: AOG24LN or AOG24LP (L-Series) and AOG24TN or AOG24TP (T-Series). The stainless post is set in a concrete footing about 10-12" across and 18" deep, and the grill slides onto the top and fastens with four hex screws.

Rigid side shelves stand 32" from the ground to the top of the shelf and bring the total width to 52-7/8". A 1-hour timer valve (3092C) is pre-installed inside the post, so the gas shuts off on its own when the timer runs out, and the included PR-4 convertible regulator is factory set for natural gas and converts to propane together with the burner orifices. Accessible-height models include an oven hood side handle kit (3600-51).

A post base suits patios and decks where a compact, permanent grill station is wanted without building an island. For propane, the cylinder goes in a separate enclosure that meets AOG's housing rules. The grill head is sold separately.

Key features

  • Fits AOG24LN, AOG24LP, AOG24TN and AOG24TP grill heads
  • 32" from the ground to the top of the shelf (accessible height)
  • Rigid side shelves, 52-7/8" overall width
  • Pre-installed 1-hour timer valve 3092C
  • PR-4 convertible regulator, factory set for natural gas
  • Included CSA stainless flex connector 3035 with fittings
  • In-ground post extension GP-7-24 for the concrete footing
  • Rear access plate
  • Oven hood side handle kit 3600-51

Specifications

Model AOG24-GA
Brand American Outdoor Grill (R.H. Peterson Co.)
Type 24" grill post base, in-ground, accessible height (32")
Unit dimensions Height, ground to top of shelf: 32". Post: 5-1/2" W x 5-5/8" D; in-ground extension 16-1/2" below ground. Width with shelves 52-7/8". Maximum outer depth 21-1/4"
Cutout dimensions None required (freestanding post); footing hole about 10-12" diameter x 18" deep, concrete 3-5" below ground level, gas line about 4" above ground
Viewing area Not applicable
Clearances to combustibles 18" minimum horizontal clearance in all directions from combustible materials. Propane cylinder enclosure: at least 6" from any construction at the sides, vent openings at least 6" from items outside and 2" from the cylinder inside.
Fits AOG24LN / AOG24LP (L-Series) and AOG24TN / AOG24TP (T-Series)
Timer 1-hour timer valve 3092C, pre-installed
Regulator PR-4 convertible, factory set for natural gas
Gas supply pressure Do not exceed 10.5" w.c. natural gas or 13" w.c. propane
Electrical L-Series grills: 120VAC, 15 A minimum, GFCI-protected grounded three-wire weatherproof in-use covered receptacle. T-Series grills: none
Use Outdoor use only

Included components

  • Rigid shelf with hardware PP-1-24
  • Grill installation hardware PP-2-24
  • Timer valve 3092C (1 hour)
  • Convertible regulator PR-4
  • Rear access plate GA-6-24
  • In-ground post extension GP-7-24
  • Flex connector with fittings 3035
  • Oven hood side handle kit 3600-51

Required components

  • An AOG 24" grill head: AOG24LN or AOG24LP (L-Series), AOG24TN or AOG24TP (T-Series)
  • Gas shut-off valve within 6 ft of the grill (not included)
  • 1/2" male-to-male flare adapter (not included)
  • Propane from a cylinder: propane regulator with hose 5110-07 (sold separately), a 20 lb cylinder with overfill prevention device, and a cylinder enclosure built to the AOG housing rules
  • L-Series grills: a 120VAC, 15 A, GFCI-protected, in-use covered outdoor receptacle
  • Concrete for the in-ground footing

Optional accessories

  • 24" built-in grill cover AOB24

Installation & safety

⚠ Important: This base gets hot when the grill is in use. Install outdoors only, following the AOG post base instructions and the grill head manual. Never use a flame to check for gas leaks.

Appliance installation requirements

  • 18" minimum horizontal clearance from combustible materials in all directions.
  • Shut-off valve within 6 ft of the unit; gas supply not over 10.5" w.c. (natural gas) or 13" w.c. (propane).

Gas safety and installation guidelines

  • Use the CSA-listed stainless flex connector; a propane regulator hose must not connect directly to the unit and may be no longer than 6 ft, above ground.
  • For pressure tests above 1/2 psi disconnect the appliance and its shut-off valve; at or below 1/2 psi close the appliance shut-off valve.
  • The base ships set for natural gas; for propane convert the regulator inside the post and the burner orifices.

Propane cylinder housing and enclosure

  • Standard 20 lb cylinder with overfill prevention device, never filled beyond 80%; cylinder, regulator and hose never above 125°F (51°C).
  • Enclosure: at least 22" high inside and 16.5" in diameter (or width and depth); cylinder at least 2" above the floor; 6" side clearance from construction.

Installation steps (instruction sequence)

  • Prepare the site; build a propane enclosure if no holder is used; unpack the post and prepare the grill (remove drip tray, support adjustment bolts and attached regulator); check or convert the gas type.
  • In-ground: dig a hole about 10-12" across and 18" deep, set the post in wet concrete level and plumb, and let it dry fully before mounting the grill.
  • With at least three people, slide the grill onto the post and fasten it with four hex screws; connect the flex connector to the timer valve; connect the gas supply and shut-off valve; leak test with soapy water.
  • L-Series: make the electrical connection (dielectric grease on the male connectors); refit the access plate, shelves and drip tray, then fit the side handle kit.

Building code information

  • Local codes, or the National Fuel Gas Code ANSI Z223.1/NFPA 54 (NFPA 54); Canada CSA B149.1 / B149.2.

Warranty

American Outdoor Grill limited warranty, original purchaser: valves and controls are warranted for ten (10) years; grill parts and accessories, including the post base, for two (2) years. Labor, misuse and improper installation are not covered.

Downloads

Follow the manufacturer's installation instructions exactly. Improper installation, adjustment, alteration or maintenance can cause fire, property damage or injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.

California Proposition 65

WARNING: This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Frequently asked questions — AOG24-GA

Which grills fit the AOG24-GA?

Any AOG 24" grill head: AOG24LN, AOG24LP (L-Series), AOG24TN or AOG24TP (T-Series). The grill is sold separately.

How tall is it?

32" from the ground to the top of the shelf, the accessible height. With both shelves it is 52-7/8" wide.

Can I use a propane tank?

Yes. Add the 5110-07 propane regulator with hose and convert the PR-4 regulator and burner orifices from the factory natural gas setting. The TH-PP-2 holder is made for the standard-height patio post only, so on this model the cylinder goes in an enclosure built to AOG's rules.

How is it anchored?

In a concrete footing about 10-12" across and 18" deep; the included GP-7-24 extension goes 16-1/2" below ground.

Loading component details…

Call for best price