American Fyre Designs Phoenix Vent-Free Fireplace 117
SKU / Model: 117-01-A-BA-RBC
Fireplace only$8,117.00
Unlock an exclusive offer on this product.
Overview
The American Fyre Designs Phoenix is a full-size outdoor fireplace with a classic tapered chimney that gives a patio or courtyard a true hearth-side gathering place. Cast in sections and assembled on site, it blends timeless style with modern function. This listing is the vent-free Phoenix (series 117), built with the unvented chimney and five-piece firebox liner set (extra top liner), which allows overhead construction 3 feet or more above the unit. Choose the hearth, a recess option for field-applied stone or tile, and the finish.
The fireplace is the masonry-style shell: the R.H. Peterson vent-free gas burner and log set are sold separately and are required to operate it.
It needs 6" of clearance at the sides and rear and 36" in front of the hearth, and overhead construction must be at least 3 ft above the top of the unit. Natural gas or propane burners can be used; propane burners need a valve and pilot and cannot be match-lit. American Fyre Designs covers the GFRC fireplace for three years.
Key features
- 65" W x 36" D x 87" H with the 16" radiused bullnose hearth
- Optional 113" extended bullnose hearth
- Recess options: no recess or recessed hearth and body; recessed surfaces are left unfinished for your veneer
- Firebox liners and a factory-installed key valve included
- Certified to ANSI Z21.97/CSA 2.41 when installed with select R.H. Peterson unvented gas appliances
- 1,100 lb in 7 pieces with the 16" hearth
- Takes R.H. Peterson G10 stainless steel vent-free burner (up to 24/30" with a 24" log set) or G21 stainless steel contemporary vent-free burner (up to 24"; Fyre Glass and Fyre Gems only)
- Clearances: 6" sides and rear, 36" front, 0" below; above: 36" (no overhead construction less than 3 ft above the top of the unit)
- Outdoor use only
- 3-year limited warranty on the GFRC fireplace
Specifications
| Model | American Fyre Designs Phoenix vent-free outdoor fireplace (117 series) |
|---|---|
| Type | Outdoor gas fireplace, vent-free, sectional GFRC (glass fibre reinforced concrete) shell; burner and log set sold separately; outdoor use only |
| Unit dimensions | 65" W x 36" D x 87" H (with 16" radiused bullnose hearth); 1,100 lb, 7 pieces |
| Framing dimensions | None required (freestanding outdoor fireplace set on a hard, level surface) |
| Viewing area | Not published by the manufacturer |
| Clearances to combustibles | Sides: 6" (hearth edge to combustible construction). Rear: 6". Front: 36" (hearth extension to combustible construction). Below: 0" (hard, level surface; combustible materials permitted). Above: 36" (no overhead construction less than 3 ft above the top of the unit). Propane cylinder enclosure: 6" sides, 0" above |
| Hearth options | 16" Radiused Bullnose: 65" W x 36" D x 16" H (code 01); 113" Extended Bullnose: 113" W x 36" D x 16" H (code 05) |
| Manufacturer weight | 1,100 lb, 7 pieces (with 16" hearth) |
| Compatible burners | R.H. Peterson G10 stainless (up to 24/30" with 24" log set) or G21 stainless (up to 24") unvented burners |
| Log sets | R.H. Peterson vent-free fireplace log sets (CHFR series) |
| Fuel | Natural gas or propane (propane requires a valve and pilot burner) |
| Gas inlet pressure | Natural gas 5" to 10.5" w.c.; propane 11" to 13" w.c. |
| Gas supply line | 1/2" minimum inside diameter; runs over 20 ft may need a larger line |
| Shut-off valve | Accessible gas shut-off valve within 6 ft of the unit (not included) |
| Recess options | Recessed Hearth & Body, No Recess (recessed surfaces are left unfinished for field-applied stone or tile) |
| Finishes | Black Lava, Café Blanco, Smoke, White Aspen |
| Gas configuration | RBC (key valve on the right side) |
| Certification | ANSI Z21.97/CSA 2.41 outdoor decorative gas appliances (with select R.H.P. gas appliances) |
| Warranty | 3 years on the GFRC fireplace and related GFRC and stainless steel products; 1 year on electrical components, valves, accessories and controls (batteries, wind guards and screens excluded); original purchaser, single-family residential use in the US or Canada, proof of purchase required; burning wood or any fuel other than natural gas or propane, and high-wind damage, are not covered |
Included components
- Hearth (one-piece or multi-piece)
- Firebox liner set with shims: 5 liners and 2 shims (unvented set, with the extra top liner)
- Body
- Unvented chimney
- Key valve, pre-installed
- 3/8"-16 x 2.5" bolts, pre-installed (2)
- Body hardware kits (4)
- Hearth hardware kits (8)
Required components
- R.H. Peterson G10 stainless steel vent-free burner (up to 24/30" with a 24" log set) or G21 stainless steel contemporary vent-free burner (up to 24"; Fyre Glass and Fyre Gems only)
- R.H. Peterson Charred Frontier Oak vent-free log set (CHFR series, e.g. CHFR-24) with the G10 burner, or Fyre Glass / Fyre Gems with the G21 burner
- Gas supply line, 1/2" minimum inside diameter (runs over 20 ft may need a larger line)
- Propane installations: burner with valve and pilot assembly (no match-lit propane)
- Propane installations: standard 20 lb (5-gallon) cylinder, regulator and hose of 10 ft maximum (single-stage regulator up to 95,000 BTU; two-stage up to 150,000 BTU)
- Propane installations: ventilated cylinder enclosure, such as an American Fyre Designs tank/end table
Optional accessories
- GFRC chimney rain vent cap 8017RV
- GFRC protector plate 8200
- Arched black scroll screen 8250-BL
Downloads
- Phoenix and Mariposa outdoor fireplace installation manual (L-H2-011)
- Ventilation and clearances important notice (L-H2-001)
- American Fyre Designs product catalog
- Official Phoenix product page
Installation & safety notes
Set the fireplace on a hard, level surface. Above 2,000 ft elevation, input ratings are reduced about 4% per 1,000 ft. Install and connect gas to local codes, or in their absence the National Fuel Gas Code ANSI Z223.1/NFPA 54 (CSA B149.1/B149.2 in Canada). Not for use inside any building, garage or enclosed space. The fireplace ships in heavy sections; plan for equipment and a crew at delivery.
Follow the manufacturer's installation and operating instructions exactly. Improper installation can cause fire, property damage or injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
California Proposition 65
WARNING: This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Flames and flame colors on the website may appear differently in real life.
Frequently asked questions — American Fyre Designs Phoenix 117
How big is the Phoenix fireplace?
65" W x 36" D x 87" H (with 16" radiused bullnose hearth). It weighs 1,100 lb and ships in 7 pieces. The 113" extended bullnose hearth option is 113" W x 36" D x 16" H.
What clearances does it need?
6" at the sides (from the hearth edge) and rear, 36" in front of the hearth extension and 0" below. Above: 36" (no overhead construction less than 3 ft above the top of the unit).
Can it go under a covered patio or pergola?
Yes, as long as the overhead construction is at least 3 ft above the top of the unit. That is what the vent-free version allows; the vented version may not go under any overhead construction.
Is a burner included?
No. The fireplace is the GFRC shell with firebox liners and a pre-installed key valve. It needs an R.H. Peterson G10 stainless steel vent-free burner (up to 24/30" with a 24" log set) or G21 stainless steel contemporary vent-free burner (up to 24"; Fyre Glass and Fyre Gems only), plus an R.H. Peterson Charred Frontier Oak vent-free log set (CHFR series, e.g. CHFR-24) with the G10 burner, or Fyre Glass / Fyre Gems with the G21 burner.
Can it run on propane?
Yes. Propane installations need a burner with a valve and pilot assembly (propane may not be match-lit), a 20 lb cylinder in a ventilated enclosure and a hose of 10 ft or less. Inlet pressure: natural gas 5" to 10.5" w.c.; propane 11" to 13" w.c.
What's the warranty?
3 years on the GFRC fireplace and related GFRC and stainless steel products, and 1 year on electrical components, valves, accessories and controls (batteries, wind guards and screens excluded), for single-family residential use in the US or Canada.
Loading component details…

