American Fyre Designs Mariposa Vent-Free Fireplace 173
SKU / Model: 173-01-A-CB-RBC
Fireplace only$8,117.00
Unlock an exclusive offer on this product.
Product overview
The American Fyre Designs Mariposa is a full-size outdoor fireplace with a lower, classic profile that brings warmth and ambiance to outdoor gatherings without dominating the view. Cast in sections and assembled on site, it stands 67 inches tall. This listing is the vent-free Mariposa (series 173), built with the unvented chimney and five-piece firebox liner set (extra top liner), which allows overhead construction 3 feet or more above the unit. Choose the hearth, a recess option for field-applied stone or tile, and the finish.
The fireplace is the masonry-style shell: the R.H. Peterson vent-free gas burner and log set are sold separately and are required to operate it.
Key features
- 65" W x 36" D x 67" H with the 16" radiused bullnose hearth
- Optional 113" extended bullnose hearth
- Recess options: no recess, recessed hearth, or recessed hearth and body; recessed surfaces are left unfinished for your veneer
- Firebox liners and a factory-installed key valve included
- Certified to ANSI Z21.97/CSA 2.41 when installed with select R.H. Peterson unvented gas appliances
- Outdoor use only
Specifications
| Model series | 173 (vent-free / unvented) |
|---|---|
| Overall dimensions | 65" W x 36" D x 67" H (with 16" radiused bullnose hearth) |
| Hearth options | 16" Radiused Bullnose: 65" W x 36" D x 16" H (code 01); 113" Extended Bullnose: 113" W x 36" D x 16" H (code 05) |
| Manufacturer weight | 970 lb, 7 pieces (with 16" hearth) |
| Compatible burners | R.H. Peterson G10 stainless (up to 24/30" with 24" log set) or G21 stainless (up to 24") unvented burners |
| Log sets | R.H. Peterson vent-free fireplace log sets (CHFR series) |
| Fuel | Natural gas or propane (propane requires a valve and pilot burner) |
| Gas inlet pressure | Natural gas 5" to 10.5" w.c.; propane 11" to 13" w.c. |
| Gas supply line | 1/2" minimum inside diameter; runs over 20 ft may need a larger line |
| Clearances to combustibles | Sides 6", rear 6", front 36", below 0", above 36" |
| Overhead | No overhead construction less than 3 ft above the unit |
| Gas configuration | RBC (key valve on the right side) |
| Certification | ANSI Z21.97/CSA 2.41 outdoor decorative gas appliances (with select R.H.P. gas appliances) |
What's included
Hearth (one-piece or multi-piece), firebox liners with shims (including the extra top liner), body, unvented chimney, bolts and hardware kits, with the key valve pre-installed.
Required (sold separately)
An R.H. Peterson unvented gas appliance (G10 or G21 stainless burner with matching vent-free log set), plus the gas shut-off valve, hose and regulator. Propane installations need a ventilated cylinder enclosure such as an American Fyre Designs tank/end table.
Optional accessories
8073RV GFRC chimney rain vent cap, 8200 GFRC protector plate and the arched scroll screen.
Downloads
- Phoenix and Mariposa outdoor fireplace installation manual (L-H2-011)
- Ventilation and clearances important notice (L-H2-001)
- American Fyre Designs product catalog
- Official Mariposa product page
Installation and safety notes
Set the fireplace on a hard, level surface. Above 2,000 ft elevation, input ratings are reduced about 4% per 1,000 ft. Install and connect gas to local codes, or in their absence the National Fuel Gas Code ANSI Z223.1/NFPA 54 (CSA B149.1/B149.2 in Canada). Not for use inside any building, garage or enclosed space. The fireplace ships in heavy sections; plan for equipment and a crew at delivery.
WARNING: This product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
DISCLAIMER: Flames and flame colors on the website may appear differently in real life.
INSTALLATION SAFETY: Follow the manufacturer's installation and operating instructions exactly. Improper installation can cause fire, property damage or injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.
Loading component details…

