Amantii 30" Fire & Ice Classic Edition Electric Insert CE30

Product overview

Experience the timeless charm of a traditional fireplace with the Fire & Ice Classic Edition, a 30-inch electric insert built around classic elegance. Flames flicker and dance over glowing logs, set against a brick interior with natural soot markings, all behind tempered glass for a finished hearth that feels like it has always been there.

Ultra-realistic flames bring the scene to life, with high-intensity LEDs that keep the fire bright at any time of day. Adjust the flames, the glow of the ember bed and the speed of the fire until it feels just right, from a soft background flicker to a full, lively blaze.

When the evening turns cool, the Classic Edition warms rooms up to 400 square feet, and the flames run on their own whenever you only want the look of a fire. Control it from across the room with the included remote, from your phone with the app, or with touch controls that light up when needed and dim away when not. It plugs right into a standard outlet, so a traditional fireplace is easier than ever to add.

Key features

• Ultra Flame Technology. Ultra-realistic flames that faithfully recreate the look of a natural wood fire.
• Classic log and brick interior. Flames dance over glowing logs set against a standard brick interior with natural soot markings.
• Tempered front glass. The fire sits behind tempered glass for a finished, traditional hearth look.
• Bright in any light. High-intensity LEDs in the flames and ember bed keep the fire clear at any time of day.
• Four flame settings, three flame speeds. Adjust flame and ember-bed brightness and how fast the flames move.
• Controls that stay out of sight. The touchscreen lights up when needed and dims when not in use, so the buttons never distract from the fire.
• Remote and WiFi control. Use the included remote from anywhere in the room, or the Smart Life app on your phone.
• 1,500-watt fan-forced heater. Warms rooms up to 400 square feet. 11 thermostat settings from 64°F to 82°F, or continuous ON. The heater locks out and the flames run without heat.
• Plug-in ready. Comes with a plug kit and 6-foot cord for a standard 120-volt grounded outlet. A qualified electrician can hardwire it.
• 1–9 hour timer and memory. Switches off on its own and restarts with your last settings.

Included components

The fireplace (with front glass, logs and brick interior) ships with a remote control, mounting screws, a plastic wire ring for hardwiring and the manual.

Required components

A framed wall cabinet built to the dimensions below, and a 120-volt grounded outlet within reach of the 6-ft (1.8 m) cord exiting from the rear. A dedicated outlet is recommended. For a hardwired installation, a qualified electrician removes the cord and connects the supply to the junction block under the rear cover plate.

Specifications

Product video

Installation and safety notes

Frame the wall opening to the cabinet dimensions above before finishing. Any new wiring must meet local and national codes. Test the fireplace on a grounded 120-volt outlet, then slide it into the cabinet and fix it with the supplied screws.

Keep combustible materials away from the front of the fireplace and never block the air intake or heater outlet. Plug the cord directly into a wall outlet; do not use an extension cord or power strip.

The Classic Edition is designed for indoor use only.

Safety warnings and disclaimer

WARNING: This product can expose you to chemicals including lead in the wiring, which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.

INSTALLATION SAFETY: For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.

DISCLAIMER: Flames and flame colors on the website may appear differently in real life.

Warranty summary

Fire & Ice products carry a 1-year limited warranty to the original owner. It covers repair or replacement of parts defective in material or workmanship when the fireplace is installed and used as directed.

Manufacturer manuals and downloads

• Installation and operation manual, CE26/CE30/CE33 (revised Oct 22, 2025)
• Installation and operation manual, US edition (2024)
• CE30 technical specification sheet
• Classic Edition cut sheet
• Fire & Ice brochure
• WiFi app setup guide
• Classic Edition product video (YouTube)

Frequently asked questions — CE30

What size opening does the CE30 need?

It needs a built-in cabinet of 27.8" W × 23.8" H × 8.5" D. The back of the fireplace measures 27.0" W × 23.5" H × 7.5" D.

Does the CE30 plug in or hardwire?

Either. It comes with a 6-ft cord for a 120-volt grounded outlet, and a qualified electrician can remove the cord and hardwire it.

Are the logs and brick interior included?

Yes. The Classic Edition comes with its log set and brick-pattern interior behind tempered front glass.

Can I run the flames without heat?

Yes. The heater is switched separately from the flame, so you can use the flame effect on its own.