{"product_id":"true-north-tn40-pellet-insert-33040001","title":"True North TN40 Pellet Insert — 33040001","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e\u003cp\u003eThe True North TN40 Pellet Insert turns an existing wood-burning fireplace into a clean, easy-to-run pellet heater. It is built from heavy-gauge steel with a wide firepot for a full flame, and it burns so cleanly that its certified emissions are just 0.69 g\/hr.\u003c\/p\u003e\u003cp\u003eThe hopper holds up to 60 pounds of pellets behind an easy-opening lid with a safety shut-off switch. Digital controls offer manual, automatic and hi\/low operation with five heat levels, and with a wall thermostat the insert runs itself to your set temperature. An automatic igniter, air-wash glass and a self-cleaning stainless steel burn pot liner keep day-to-day care simple, and two convection blowers carry the heat into the room.\u003c\/p\u003e\u003cp\u003eThe insert ships with a 42\" × 29\" surround, and an oversize surround is available for larger fireplace openings.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 36,000 BTU.\u003c\/strong\u003e Wide firepot and two convection blowers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery low emissions.\u003c\/strong\u003e 0.69 g\/hr, EPA 2020 certified; 79.6% LHV efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 60 lb hopper.\u003c\/strong\u003e Easy-open lid with safety shut-off switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree operating modes.\u003c\/strong\u003e Manual, automatic and hi\/low (automatic and hi\/low use a wall thermostat).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-level heat control.\u003c\/strong\u003e Easy-access digital controls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic igniter.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-cleaning burn pot.\u003c\/strong\u003e Stainless steel burn pot liner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean glass.\u003c\/strong\u003e Air-wash technology over 104 sq. in. of glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurround included.\u003c\/strong\u003e 42\" × 29\" × 1 1\/2\" standard surround.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobile home approved.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cp\u003eThe TN40 Pellet Insert (33040001) comes complete with its cast iron door, hopper, standard 42\" × 29\" surround, two convection blowers, stainless steel burn pot liner and the installation and operating manual.\u003c\/p\u003e\u003ch3\u003eRequired components\u003c\/h3\u003e\u003cp\u003eVenting is not included. The insert has a 3\" flue collar and needs a 3\" or 4\" stainless steel liner listed to UL 1777 (an increaser is required for 4\"); in the USA a direct flue connection is allowed, while Canada requires a full liner to the top of the chimney. Maximum vent length is 45 feet, and 4\" vent is recommended above 4,000 feet. The fireplace must be a masonry or approved factory-built wood-burning fireplace with an opening of at least 29 1\/2\" wide at the front, 24\" wide at the rear, 16\" deep and 21 1\/4\" high, and a non-combustible hearth extending 16\" in front of the opening. A 120-volt grounded outlet is required (a surge-protected power bar is recommended).\u003c\/p\u003e\u003ch3\u003eOptional accessories\u003c\/h3\u003e\u003cp\u003eThe oversize 48\" surround backing plate (33120001) covers larger fireplace openings, and a low-voltage or millivolt wall thermostat (not included) enables automatic and hi\/low modes. The oversize surround and approved DuraVent pellet liner kits can be selected below.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel \/ MPN\u003c\/th\u003e\n\u003ctd\u003eTN40 Insert Series A — 33040001 (TN40INSA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTrue North (Pacific Energy Fireplace Products)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAppliance type\u003c\/th\u003e\n\u003ctd\u003ePellet fireplace insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFuel\u003c\/th\u003e\n\u003ctd\u003ePremium wood pellets only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum heat output\u003c\/th\u003e\n\u003ctd\u003e36,000 BTU\/hr (per True North)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEPA tested output\u003c\/th\u003e\n\u003ctd\u003e6,000 – 25,600 BTU\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat input\u003c\/th\u003e\n\u003ctd\u003eApproximately 10,000 – 38,000 BTU\/hr, depending on fuel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEfficiency\u003c\/th\u003e\n\u003ctd\u003e79.6% LHV \/ 73% HHV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEmissions\u003c\/th\u003e\n\u003ctd\u003e0.69 g\/hr — EPA 2020 certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHopper capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 60 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass viewing area\u003c\/th\u003e\n\u003ctd\u003e104 sq. in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e300 lb (manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum fireplace opening\u003c\/th\u003e\n\u003ctd\u003e29 1\/2\" W front, 24\" W rear, 16\" D, 21 1\/4\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurround\u003c\/th\u003e\n\u003ctd\u003eStandard 42\" W × 29\" H × 1 1\/2\" (included); oversize 48\" W backing plate 33120001 (optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlue \/ venting\u003c\/th\u003e\n\u003ctd\u003e3\" collar; 3\" or 4\" UL 1777 stainless liner; maximum vent length 45 ft; no flue damper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClearances to combustibles\u003c\/th\u003e\n\u003ctd\u003eAdjacent side wall 12\", side facing 8 1\/2\", top facing \/ mantel 13\", front 36\", ceiling 54\" from the base of the unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHearth\u003c\/th\u003e\n\u003ctd\u003eNon-combustible, 16\" in front of the fireplace opening and 6\" beyond each side of the viewing door\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e120 V, 60 Hz; 2.5 A normal, 4.3 A peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside air\u003c\/th\u003e\n\u003ctd\u003eAccepts 2\" ID non-combustible pipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSafety listing\u003c\/th\u003e\n\u003ctd\u003eASTM E1509-12, ULC S628 (Intertek); for use in mobile homes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eInstall the TN40 only in a masonry or approved factory-built wood-burning fireplace with at least the minimum opening listed above, and keep the manual's clearances to side walls, side facings and mantels. The hearth in front must be non-combustible and reach 16 inches beyond the fireplace opening. Remove or permanently open any flue damper; none is permitted with the insert.\u003c\/p\u003e\u003cp\u003eVent through a listed 3\" or 4\" stainless steel liner within 45 feet of total length. Outside air can be brought in through 2\" pipe via an ash clean-out, a hole through the back of the fireplace or flex pipe up the chimney, with the intake well below the flue termination.\u003c\/p\u003e\u003cp\u003eBurn only premium wood pellets and plug the insert into a grounded 120-volt outlet, ideally through a surge-protected power bar.\u003c\/p\u003e\u003ch3\u003eSafety warnings and disclaimer\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e Using this product can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm, and soot, which is known to the State of California to cause cancer. For more information, visit \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eINSTALLATION SAFETY:\u003c\/strong\u003e For your safety, follow the manufacturer's installation and operating instructions exactly. An incorrect installation can lead to a fire, property damage or personal injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDISCLAIMER:\u003c\/strong\u003e Flames and flame colors on the website may appear differently in real life.\u003c\/p\u003e\u003ch3\u003eWarranty summary\u003c\/h3\u003e\u003cp\u003eTrue North pellet products carry a limited warranty to the original purchaser for normal residential use: 3 years parts and 1 year labor on the firebox, castings and glass (glass for thermal breakage only), 1 year parts and labor on electrical components and switches, and 1 year parts only on gaskets, paint (peeling), bricks, firebox liner and burn pot and liner. Installation must be by a qualified technician to the instructions and codes, and the warranty is not transferable.\u003c\/p\u003e\u003ch3\u003eManufacturer manuals and downloads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/truenorthstoves.com\/wp-content\/uploads\/2024\/03\/100004050-Manual-TN40-Insert-English-201123-32.pdf\"\u003eTN40 Pellet Insert installation and operating manual (100004050, rev. 201123)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/truenorthstoves.com\/wp-content\/uploads\/2024\/03\/tn40pelletinsertbrochure.pdf\"\u003eTN40 Pellet Insert brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/truenorthstoves.com\/wp-content\/uploads\/2024\/03\/revisedtn40reportlv.pdf\"\u003eTN40 EPA test data\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/truenorthstoves.com\/warranty\/pellet-products\/\"\u003eTrue North pellet products warranty\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/truenorthstoves.com\/register-your-product\/\"\u003eRegister your True North product\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions — TN40 Pellet Insert\u003c\/h3\u003e\n\u003ch4\u003eWill the TN40 insert fit my fireplace?\u003c\/h4\u003e\u003cp\u003eThe opening must be at least 29 1\/2\" wide at the front, 24\" wide at the rear, 16\" deep and 21 1\/4\" high, in a masonry or approved factory-built wood-burning fireplace.\u003c\/p\u003e\n\u003ch4\u003eDoes it need a chimney liner?\u003c\/h4\u003e\u003cp\u003eIn the USA a direct flue connection is allowed, though a full 3\" or 4\" stainless liner is the common choice; in Canada a full liner to the top of the chimney is required.\u003c\/p\u003e\n\u003ch4\u003eWhat if my fireplace opening is larger than the surround?\u003c\/h4\u003e\u003cp\u003eAdd the oversize surround backing plate (33120001).\u003c\/p\u003e\n\u003ch4\u003eDo I need a thermostat?\u003c\/h4\u003e\u003cp\u003eNo. Manual mode works without one; automatic and hi\/low modes need an optional wall thermostat.\u003c\/p\u003e","brand":"True North","offers":[{"title":"Default Title","offer_id":50912507953314,"sku":"33040001","price":4931.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/5846\/8770\/files\/TN40-pellet-insert.avif?v=1795049195","url":"https:\/\/unitedfireplaces.com\/products\/true-north-tn40-pellet-insert-33040001","provider":"United Fireplaces","version":"1.0","type":"link"}