{"product_id":"kingsman-zcvrb3622-surround-trim-kit-black-zcvrb36sbl","title":"Kingsman ZCVRB3622 Surround Trim Kit, Black ZCVRB36SBL","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e\u003cp\u003eThe Kingsman ZCVRB36SBL is the 1-1\/2\" wide black surround trim kit for the Kingsman ZCVRB3622 36\" linear direct vent gas fireplace. It is a frame with two side fillers that sits around the fireplace opening and gives the edge where the fireplace meets the wall a clean, finished line. The surround installation page gives its size as 36\" W x 22-7\/8\" H.\u003c\/p\u003e\u003cp\u003eThe frame is 1\" thick with a 3\/4\" space behind it. With this surround fitted, the fireplace face may be covered up to within 1\/8\" of the opening with non-combustible materials such as tile or stone, and the surround frames the result. Kingsman shows the surround with the framing set flush with the face of the fireplace.\u003c\/p\u003e\u003cp\u003eThe black finish gives a low-key border that keeps attention on the flame. It is an optional kit, listed under \"Fireplace Surrounds \u0026amp; Kits\" in the ZCVRB3622 parts list, and a stainless steel version (ZCVRB36SSS) is also made. It suits a compact modern fireplace wall where you want a defined metal border around the flame picture.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFrames the Kingsman ZCVRB3622 linear gas fireplace with a 1-1\/2\" wide border\u003c\/li\u003e\n\u003cli\u003eFinish: black\u003c\/li\u003e\n\u003cli\u003eFrame 1\" thick with a 3\/4\" space behind it\u003c\/li\u003e\n\u003cli\u003eTwo side fillers slide into place at the sides of the opening\u003c\/li\u003e\n\u003cli\u003eFireplace face may be covered up to within 1\/8\" of the opening with non-combustible materials\u003c\/li\u003e\n\u003cli\u003eFastened with six #6 self-tapping screws, all supplied\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits \/ compatible with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/kingsman-zcvrb3622-36-linear-gas-fireplace-zcvrb3622\"\u003eKingsman ZCVRB3622 36\" linear direct vent gas fireplace\u003c\/a\u003e: ZCVRB3622N and ZCVRB3622LP (millivolt), ZCVRB3622NE and ZCVRB3622LPE (IPI) (36ZCV-MAN19-4 p.73)\u003c\/li\u003e\n\u003cli\u003eListed in the ZCVRB3622 parts list under \"Fireplace Surrounds \u0026amp; Kits\" (p.73)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: ZCVRB36SBL\u003c\/li\u003e\n\u003cli\u003eBrand: Kingsman\u003c\/li\u003e\n\u003cli\u003eKingsman description: Surround Trim Kit for ZCVRB3622 Black\u003c\/li\u003e\n\u003cli\u003eDimensions: 36\" W x 22-7\/8\" H (surround installation, 36ZCV-MAN19-4 p.22); the parts list gives 35-15\/16\" W x 22-7\/8\" T (p.73); the Kingsman price list gives 36\" W x 22-1\/2\" H\u003c\/li\u003e\n\u003cli\u003eFrame: 1\" thick, 3\/4\" space behind the frame (36ZCV-MAN19-4 p.22)\u003c\/li\u003e\n\u003cli\u003eFacing: the fireplace may be covered up to within 1\/8\" of the opening with non-combustible materials (36ZCV-MAN19-4 p.22)\u003c\/li\u003e\n\u003cli\u003eFinish: black\u003c\/li\u003e\n\u003cli\u003eShipping weight: 13 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSurround frame, quantity 1\u003c\/li\u003e\n\u003cli\u003eSurround side fillers (left and right), quantity 2\u003c\/li\u003e\n\u003cli\u003e#6 self-tapping screws, quantity 6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRequired components\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/kingsman-zcvrb3622-36-linear-gas-fireplace-zcvrb3622\"\u003eKingsman ZCVRB3622 fireplace\u003c\/a\u003e (ZCVRB3622N and ZCVRB3622LP (millivolt), ZCVRB3622NE and ZCVRB3622LPE (IPI)), sold separately\u003c\/li\u003e\n\u003cli\u003eFraming set flush with the face of the fireplace, using the nailing tabs (36ZCV-MAN19-4 p.13 and p.22)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemove the glass door.\u003c\/li\u003e\n\u003cli\u003eHook the surround over the lower ledge of the fireplace and slide the side fillers into place.\u003c\/li\u003e\n\u003cli\u003eAttach each side filler to the firebox face with two screws.\u003c\/li\u003e\n\u003cli\u003eInstall two screws into the inside top of the surround, then replace the door.\u003c\/li\u003e\n\u003cli\u003eUnited Fireplaces recommends that every appliance and accessory be installed by a qualified professional installer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThe Kingsman warranty printed in the ZCVRB3622 manual (36ZCV-MAN19-4 p.77) gives a basic one-year warranty on component parts found defective in materials or workmanship, including labour; repair work needs prior approval by Kingsman and must be done through an authorized Kingsman dealer. Accent light bulbs, gasketing and paint are excluded.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/kingsmanind.com\/wp-content\/uploads\/2016\/07\/36ZCV-MAN19-4.pdf\"\u003eZCVRB3622 installation and operating manual (36ZCV-MAN19-4)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions — ZCVRB36SBL\u003c\/h3\u003e\u003ch4\u003eWhich fireplaces does the ZCVRB36SBL fit?\u003c\/h4\u003e\u003cp\u003eThe Kingsman ZCVRB3622 36\" linear direct vent fireplace: ZCVRB3622N and ZCVRB3622LP (millivolt), ZCVRB3622NE and ZCVRB3622LPE (IPI), as listed in its parts list (36ZCV-MAN19-4 p.73). It is not the surround for the ZCV3622.\u003c\/p\u003e\u003ch4\u003eWhat size is it?\u003c\/h4\u003e\u003cp\u003eThe surround installation page gives 36\" W x 22-7\/8\" H (36ZCV-MAN19-4 p.22) and the parts list gives 35-15\/16\" W x 22-7\/8\" T (p.73). The Kingsman price list gives 36\" W x 22-1\/2\" H. The frame is 1\" thick.\u003c\/p\u003e\u003ch4\u003eWhat is included?\u003c\/h4\u003e\u003cp\u003eOne surround frame, two side fillers (left and right) and six #6 self-tapping screws.\u003c\/p\u003e\u003ch4\u003eIs it required?\u003c\/h4\u003e\u003cp\u003eNo. It is an optional kit listed under \"Fireplace Surrounds \u0026amp; Kits\". Without it, the fireplace face may be finished with non-combustible materials, and combustibles such as drywall may run up to the edge of the fireplace only (36ZCV-MAN19-4 p.17). The Kingsman price list notes that the fireplace must be covered up to 1\/8\" of the opening with non-combustible materials.\u003c\/p\u003e\u003ch4\u003eCan I tile up to it?\u003c\/h4\u003e\u003cp\u003eYes, with non-combustible materials. With this surround, the fireplace may be covered up to within 1\/8\" of the opening with non-combustible materials (36ZCV-MAN19-4 p.22).\u003c\/p\u003e\u003ch4\u003eWhat is the warranty?\u003c\/h4\u003e\u003cp\u003eKingsman's basic warranty covers component parts found defective in materials or workmanship for one year, including labour, with prior approval by Kingsman and repair through an authorized Kingsman dealer. Accent light bulbs, gasketing and paint are excluded.\u003c\/p\u003e","brand":"Kingsman","offers":[{"title":"Default Title","offer_id":50912158384290,"sku":"ZCVRB36SBL","price":518.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/5846\/8770\/files\/kgm-zcvrb36sbl_1-1761501072_9797.jpg?v=1795048315","url":"https:\/\/unitedfireplaces.com\/products\/kingsman-zcvrb3622-surround-trim-kit-black-zcvrb36sbl","provider":"United Fireplaces","version":"1.0","type":"link"}