{"product_id":"hestan-30-insulated-jacket-cut-out-dimensions-35-w-x-12-13-16-h-x-25-1-8-d-agij30","title":"Hestan 30\" Insulated Grill Jacket AGIJ30","description":"\u003cp\u003eThe Hestan AGIJ30 insulated jacket is the part Hestan requires whenever a 30-inch Hestan built-in grill (GABR30 \/ GMBR30) goes into an island built with combustible materials such as a wood frame. It lines the island opening and holds the grill head, keeping the grill's heat away from the surrounding structure.\u003c\/p\u003e\u003cp\u003eHestan's rule is strict: all combustible material must stay outside a 12\" (30 cm) zone at the sides and rear of the grill. That includes the wood framing hidden behind a stucco or tile finish, which is why a jacket is needed even when the grill only touches non-combustible surfaces.\u003c\/p\u003e\u003cp\u003eThe jacket slides into a 35\" W x 25-1\/8\" D x 12-13\/16\" H island opening with its front face flush to the island. The grill head is then lowered into it by two people and secured at the front on both sides, with an optional fastening at the rear, before the gas, electrical and leak-test steps in the grill manual are finished.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequired by Hestan for any 30\" Hestan built-in grill installed in a combustible island\u003c\/li\u003e\n\u003cli\u003eFits the Hestan GABR30 \/ GMBR30 built-in grills\u003c\/li\u003e\n\u003cli\u003eIsland opening for the jacket: 35\" W x 25-1\/8\" D x 12-13\/16\" H\u003c\/li\u003e\n\u003cli\u003eFront face sits flush with the island face; grill secured to the jacket at the front on both sides, optionally at the rear\u003c\/li\u003e\n\u003cli\u003eScreen trim on the grill front after installation keeps vermin out of the grill\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAGIJ30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eHestan 30\" built-in grills GABR30 \/ GMBR30 (NG and LP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eIsland cutout for the jacket: 35\" W x 25-1\/8\" D x 12-13\/16\" H (Hestan spec sheet 011020); the grill manual (008980 Rev G) lists it as 35 x 25.1 x 12.8 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWhen required\u003c\/th\u003e\n\u003ctd\u003eAny island (enclosure) built of combustible materials, including wood framing behind a non-combustible finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClearances to combustibles\u003c\/th\u003e\n\u003ctd\u003e12\" (30 cm) minimum from vertical combustible material at the sides and rear of the grill; never over, under or next to unprotected combustible construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountertop overhang\u003c\/th\u003e\n\u003ctd\u003e1\" maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIsland ventilation\u003c\/th\u003e\n\u003ctd\u003eJacket instructions: at least three 10 sq in (65 sq cm) openings on each of the left side, right side and back. Grill manual: upper openings totalling 20 sq in within 5\" of the countertop and lower openings totalling 10 sq in within 1\" of the floor.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHestan AGIJ30 insulated jacket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRequired components\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA Hestan 30\" built-in grill: GABR30 \/ GMBR30\u003c\/li\u003e\n\u003cli\u003eIsland ventilation openings as listed in the specifications\u003c\/li\u003e\n\u003cli\u003e3-1\/2\" square openings in the island for the gas supply and the electrical connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation \u0026amp; safety\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003e⚠ Important:\u003c\/strong\u003e Some jacket parts have sharp edges, so wear gloves and safety glasses. The grill head is very heavy and takes two people to lift into the jacket. Hestan does not recommend building an island from combustible materials; where one is used, this jacket and the 12\" (30 cm) clearance zone are both required.\u003c\/p\u003e\u003ch4\u003eTools required\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWork gloves and safety glasses\u003c\/li\u003e\n\u003cli\u003eElectric drill with assorted bits for mounting hardware and masonry anchors where needed\u003c\/li\u003e\n\u003cli\u003ePhillips and flat-blade screwdrivers, level and tape measure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVentilation openings\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAt least three 10 sq in (65 sq cm) openings on the left side, right side and back of the island, to clear gas vapors if there is a leak.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eInsulated jacket installation\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBuild the island to the 35\" W x 25-1\/8\" D x 12-13\/16\" H cutout and add internal supports to hold the jacket in place.\u003c\/li\u003e\n\u003cli\u003eSlide the jacket in with its front face flush to the island face.\u003c\/li\u003e\n\u003cli\u003eRemove the grates, warming rack, radiant trays, rotisserie rod, drip pan and knobs. Tape any wires to the firebox, then lift the grill head in with two people, leaving a few inches open at the back to route the electrical harness and gas connection.\u003c\/li\u003e\n\u003cli\u003eRemove and set aside the control panel (unplug the 2 switches and the LED light bar), secure the grill front to the jacket on both sides, and optionally secure the rear.\u003c\/li\u003e\n\u003cli\u003eReconnect the wires, fit the screen trim to the grill front, then finish the regulator, gas connection, leak test and burner adjustment from the grill manual before refitting the control panel and knobs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHestan limited warranty: 1 year against defective materials or workmanship from the date of original retail purchase, or the closing date for new construction, whichever is longer\u003c\/li\u003e\n\u003cli\u003eOriginal consumer purchaser, non-commercial use, bought from an authorized Hestan dealer in the 50 U.S. states, D.C. or Canada\u003c\/li\u003e\n\u003cli\u003eNot covered: cosmetic damage, normal wear and tear, improper installation, and damage from corrosive atmospheres (chlorine, fluorine or other damaging chemicals)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0839\/0357\/8389\/files\/Manual_-_Insulated_Jacket.pdf\" target=\"_blank\" rel=\"noopener\"\u003eHestan insulated jacket AGIJ30 \/ AGIJ36 \/ AGIJ42 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/1150\/2454\/files\/008980_RevG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eHestan built-in grill manual 008980 Rev G (combustible-island cutouts, PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/assets.ajmadison.com\/ajmadison\/itemdocs\/hestan_grill_built_in_GABR42NG_specs.pdf\" target=\"_blank\" rel=\"noopener\"\u003eHestan built-in grill specification sheet 011020 (jacket table, PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstall according to the Hestan instructions for the jacket and the grill. United Fireplaces recommends installation by a qualified professional installer.\u003c\/p\u003e\u003ch3\u003eCalifornia Proposition 65\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eFrequently asked questions — AGIJ30\u003c\/h3\u003e\n\u003ch4\u003eWhich grills does the AGIJ30 fit?\u003c\/h4\u003e\u003cp\u003eThe Hestan 30\" built-in grills: GABR30 \/ GMBR30, in natural gas or propane.\u003c\/p\u003e\n\u003ch4\u003eDo I need it?\u003c\/h4\u003e\u003cp\u003eYes, if your island is built from combustible materials such as wood framing, even behind stucco or tile. Hestan requires the jacket and a 12\" (30 cm) clearance from vertical combustible material at the sides and rear. A fully non-combustible island does not need it.\u003c\/p\u003e\n\u003ch4\u003eWhat size opening does it need?\u003c\/h4\u003e\u003cp\u003e35\" W x 25-1\/8\" D x 12-13\/16\" H per the Hestan spec sheet (35 x 25.1 x 12.8 in. in the grill manual), with no more than a 1\" countertop overhang.\u003c\/p\u003e\n\u003ch4\u003eHow many do I need?\u003c\/h4\u003e\u003cp\u003eOne jacket per 30\" grill.\u003c\/p\u003e","brand":"Hestan","offers":[{"title":"Default Title","offer_id":50769851023522,"sku":"AGIJ30","price":1249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/5846\/8770\/files\/hestan-agij30-product.png?v=1793460032","url":"https:\/\/unitedfireplaces.com\/products\/hestan-30-insulated-jacket-cut-out-dimensions-35-w-x-12-13-16-h-x-25-1-8-d-agij30","provider":"United Fireplaces","version":"1.0","type":"link"}