{"product_id":"american-outdoor-grill-20x14-tank-tray-door-aog14tr-l","title":"American Outdoor Grill 20x14 Tank Tray Door AOG14TR\/L","description":"\u003cp\u003eThe American Outdoor Grill AOG14TR \/ AOG14TL 20\" x 14\" Door with Tank Tray and Louvers is a built-in storage unit for an outdoor kitchen island, giving you a louvered access door with a pull-out tray that holds a standard 20 lb propane cylinder in one stainless steel frame. It mounts in a 21\" H x 14-1\/2\" W x 20-1\/2\" D island cutout, with the frame sitting flush against the outside wall.\u003c\/p\u003e\u003cp\u003eIt installs in island walls from 1-1\/2\" to 2-1\/4\" thick and in every AOG GFRC island enclosure, using the included BK-1 bracket hardware kit. With access to the inside of the island, hook brackets clamp the frame to the wall; without it, long hex screws go through the frame into pilot holes. Right-hinge AOG14TR or left-hinge AOG14TL lets the door swing the way your island layout needs. The stainless steel is 304 grade, cleaned with the grain using soapy water and a stainless cleaner.\u003c\/p\u003e\u003cp\u003ePair it with an AOG L-Series or T-Series built-in grill to finish the island. When it goes directly below another unit, AOG says to use only AOG built-in products there.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20\" x 14\" Door with Tank Tray and Louvers in one stainless steel frame\u003c\/li\u003e\n\u003cli\u003eIsland cutout 21\" H x 14-1\/2\" W x 20-1\/2\" D\u003c\/li\u003e\n\u003cli\u003eMounts in island walls 1-1\/2\" to 2-1\/4\" thick and in all AOG GFRC island enclosures\u003c\/li\u003e\n\u003cli\u003eIncluded BK-1 bracket hardware kit: hook brackets (inside access) or long hex screws (no inside access)\u003c\/li\u003e\n\u003cli\u003e304 stainless steel\u003c\/li\u003e\n\u003cli\u003eRight-hinge AOG14TR or left-hinge AOG14TL version\u003c\/li\u003e\n\u003cli\u003eLouvered door, the type AOG requires for propane cylinder storage\u003c\/li\u003e\n\u003cli\u003ePull-out tank tray with collar and pull-latch for a standard 20 lb cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAOG14TR\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eAmerican Outdoor Grill (R.H. Peterson Co.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBuilt-in 20\" x 14\" door with tank tray and louvers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutout dimensions\u003c\/th\u003e\n\u003ctd\u003e21\" H x 14-1\/2\" W x 20-1\/2\" D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eOverall unit size not published by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eIsland walls 1-1\/2\" to 2-1\/4\" thick and all AOG GFRC island enclosures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBK-1 bracket hardware kit (included); wider models may include two kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHinge\u003c\/th\u003e\n\u003ctd\u003eAOG14TR right hinge; AOG14TL left hinge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePropane cylinder\u003c\/th\u003e\n\u003ctd\u003eStandard 5-gallon (20 lb) cylinder with overfill prevention device and valve collar, about 12\" diameter x 18\" high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eOutdoor kitchen islands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAOG14TR \/ AOG14TL 20\" x 14\" door with tank tray and louvers with frame\u003c\/li\u003e\n\u003cli\u003eBK-1 bracket hardware kit: 4 brackets, 4 short hex screws, 4 long hex screws (wider models may include two kits)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRequired components\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA finished island cutout 21\" H x 14-1\/2\" W x 20-1\/2\" D in a wall 1-1\/2\" to 2-1\/4\" thick, or an AOG GFRC island\u003c\/li\u003e\n\u003cli\u003eA power drill and 5\/16\" hex driver; a #21 (0.159\") drill bit for pilot holes when mounting with long screws\u003c\/li\u003e\n\u003cli\u003eA standard 20 lb propane cylinder with overfill prevention device, and a propane regulator and hose assembly (not supplied)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOptional accessories\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSilicone caulk around the back of the trim (recommended, not supplied)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation \u0026amp; safety\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003e⚠ Important:\u003c\/strong\u003e AOG specifies installation by a qualified professional service technician. Make sure the island enclosure is properly vented as the grill manual or local codes require, and never store a propane cylinder in a cabinet without a louvered door.\u003c\/p\u003e\u003ch4\u003eGeneral information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWhen used for propane cylinder storage, a louvered door model is required; never place a cylinder under or near the grill without enough ventilation and shielding to keep the regulator and hose from heating.\u003c\/li\u003e\n\u003cli\u003eWhen installing directly below another unit, use only AOG built-in products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eInstall specifications and BK-1 kit\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCut the opening 21\" H x 14-1\/2\" W x 20-1\/2\" D and orient the unit as the cutout diagram shows.\u003c\/li\u003e\n\u003cli\u003eThe BK-1 kit fits island walls 1-1\/2\" to 2-1\/4\" thick and must be used in all AOG GFRC islands.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMethod A: hook brackets (inside access)\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFrom inside the island, set each bracket over a frame cutout with its flange against the island wall, line the hole up with the oblong slot and drive a short hex screw; do not overtighten.\u003c\/li\u003e\n\u003cli\u003eBrackets are needed only on the top and bottom, or the left and right, cutouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMethod B: long screws (no inside access)\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMark holes on opposite sides of the frame, drill pilot holes, set the frame in the cutout and drive the long hex screws; do not overtighten.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eDoor installation\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSlide the unit fully into the opening so the frame sits flush against the outside wall and fasten through the installation screw slots at the top and bottom.\u003c\/li\u003e\n\u003cli\u003eTank tray: pull the tray out, set the cylinder in the holder, hook the pull-latch screw over the bracket and snap the handle closed; the collar should hold the cylinder firmly, and the screw adjusts the tension.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003ePropane gas safety\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUse a standard 20 lb cylinder with an overfill prevention device and a Type I (Acme thread) coupler with pressure regulator; never fill beyond 80%.\u003c\/li\u003e\n\u003cli\u003eInspect the cylinder, valve, hose and the CGA 791 rubber seal before each use and at every refill; leak-test with soapy water, never a flame.\u003c\/li\u003e\n\u003cli\u003eNever keep a spare cylinder under or near the grill; store disconnected cylinders outdoors, never in a building.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCare and cleaning\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eClean with grill cleaner or soapy water, wiping with the grain; rinse, dry and finish with a stainless steel cleaner. A copper pad may be used on tough deposits; never steel wool.\u003c\/li\u003e\n\u003cli\u003eNear the ocean, pools or masonry dust, clean at least monthly to prevent surface rust and pitting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBuilding code information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIsland enclosure venting follows the AOG grill manual or local codes; gas grill installations follow the National Fuel Gas Code ANSI Z223.1\/NFPA 54 (\u003ca href=\"https:\/\/www.nfpa.org\/codes-and-standards\/nfpa-54-standard-development\/54\" target=\"_blank\" rel=\"noopener\"\u003eNFPA 54\u003c\/a\u003e); Canada CSA B149.1.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eAOG doors and drawers limited warranty, original purchaser, single-family residential use in the U.S. and Canada, with proof of purchase, from the date of purchase:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSSD Series doors and drawers (stainless steel tubular handles): two (2) years\u003c\/li\u003e\n\u003cli\u003eSD Series doors and drawers (black slam latch handles): one (1) year\u003c\/li\u003e\n\u003cli\u003eNot covered: labor, misuse, improper installation or handling, missing routine maintenance, and normal outdoor rust or discoloration that does not stop the part working.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rhpeterson.com\/login\/aoginstructions\/C2-814.pdf\" target=\"_blank\" rel=\"noopener\"\u003e2026 AOG Doors and Drawers Common Instructions (L-C2-814)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/americanoutdoorgrill.com\/wp-content\/uploads\/2026\/02\/AOG_2026_Spec-Guide_Rev-00_Web.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAOG 2026 Spec Guide (cutouts and dimensions)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/americanoutdoorgrill.com\/pdf\/AOG_Product-Catalog_Web.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAOG Product Catalog\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFollow the manufacturer's installation instructions exactly. Improper installation, adjustment, alteration or maintenance can cause fire, property damage or injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.\u003c\/p\u003e\u003ch3\u003eFrequently asked questions — AOG14TR\/L\u003c\/h3\u003e\n\u003ch4\u003eWhat size cutout does the AOG14TR\/L need?\u003c\/h4\u003e\u003cp\u003e21\" H x 14-1\/2\" W x 20-1\/2\" D, in an island wall 1-1\/2\" to 2-1\/4\" thick or an AOG GFRC island.\u003c\/p\u003e\n\u003ch4\u003eHow does it mount?\u003c\/h4\u003e\u003cp\u003eWith the included BK-1 kit: hook brackets screwed on from inside the island, or long hex screws through the frame into pilot holes when there is no inside access.\u003c\/p\u003e\n\u003ch4\u003eCan I store a propane tank in it?\u003c\/h4\u003e\u003cp\u003eYes. It is a louvered door, which AOG requires for propane storage, and its pull-out tray holds a standard 20 lb cylinder about 12\" across and 18\" high.\u003c\/p\u003e\n\u003ch4\u003eWhich way does the door open?\u003c\/h4\u003e\u003cp\u003eOrder AOG14TR for a right-side hinge or AOG14TL for a left-side hinge.\u003c\/p\u003e\n\u003ch4\u003eWhat's the warranty?\u003c\/h4\u003e\u003cp\u003eTwo years on AOG SSD Series doors and drawers (stainless tubular handles); one year on SD Series (black slam latch handles).\u003c\/p\u003e","brand":"American Outdoor Grills","offers":[{"title":"Right Hinge","offer_id":50912360923298,"sku":"AOG14TR","price":520.0,"currency_code":"USD","in_stock":true},{"title":"Left Hinge","offer_id":50912360956066,"sku":"AOG14TL","price":520.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/5846\/8770\/files\/AOG14TR.jpg?v=1795040535","url":"https:\/\/unitedfireplaces.com\/products\/american-outdoor-grill-20x14-tank-tray-door-aog14tr-l","provider":"United Fireplaces","version":"1.0","type":"link"}