{"product_id":"american-outdoor-grill-14x20-horizontal-access-door-14-20-sd","title":"American Outdoor Grill 14x20 Horizontal Access Door 14-20-SD","description":"\u003cp\u003eThe American Outdoor Grill 14-20-SD 14\" x 20\" Horizontal Access Door is one of AOG's Legacy SD Series island doors: a single horizontal access door in a stainless steel frame with a black slam latch handle. It mounts in a 14-1\/2\" H x 20-1\/2\" W island cutout, with the frame sitting flush against the outside wall.\u003c\/p\u003e\u003cp\u003eIt installs in island walls from 1-1\/2\" to 2-1\/4\" thick and in every AOG GFRC island enclosure, using the BK-1 bracket hardware kit. With access to the inside of the island, hook brackets clamp the frame to the wall; without it, long hex screws go through the frame into pilot holes. The stainless steel is 304 grade, cleaned with the grain using soapy water and a stainless cleaner.\u003c\/p\u003e\u003cp\u003eUse it to give access to gas connections, storage and utilities under an AOG L-Series or T-Series built-in grill. When it goes directly below another unit, AOG says to use only AOG built-in products there.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e14\" x 20\" Horizontal Access Door, AOG Legacy SD Series\u003c\/li\u003e\n\u003cli\u003eIsland cutout 14-1\/2\" H x 20-1\/2\" W\u003c\/li\u003e\n\u003cli\u003eBlack slam latch handle (SD Series)\u003c\/li\u003e\n\u003cli\u003eMounts in island walls 1-1\/2\" to 2-1\/4\" thick and in all AOG GFRC island enclosures\u003c\/li\u003e\n\u003cli\u003eBK-1 bracket hardware kit: hook brackets (inside access) or long hex screws (no inside access)\u003c\/li\u003e\n\u003cli\u003e304 stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e14-20-SD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eAmerican Outdoor Grill (R.H. Peterson Co.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBuilt-in 14\" x 20\" horizontal access door, Legacy SD Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutout dimensions\u003c\/th\u003e\n\u003ctd\u003e14-1\/2\" H x 20-1\/2\" W (depth not published by the manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eOverall unit size not published by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eIsland walls 1-1\/2\" to 2-1\/4\" thick and all AOG GFRC island enclosures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle\u003c\/th\u003e\n\u003ctd\u003eBlack slam latch (SD Series)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBK-1 bracket hardware kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eOutdoor kitchen islands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e14-20-SD 14\" x 20\" horizontal access door with frame\u003c\/li\u003e\n\u003cli\u003eBK-1 bracket hardware kit: 4 brackets, 4 short hex screws, 4 long hex screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRequired components\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA finished island cutout 14-1\/2\" H x 20-1\/2\" W in a wall 1-1\/2\" to 2-1\/4\" thick, or an AOG GFRC island\u003c\/li\u003e\n\u003cli\u003eA power drill and 5\/16\" hex driver; a #21 (0.159\") drill bit for pilot holes when mounting with long screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOptional accessories\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSilicone caulk around the back of the trim (recommended, not supplied)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation \u0026amp; safety\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003e⚠ Important:\u003c\/strong\u003e AOG specifies installation by a qualified professional service technician. Make sure the island enclosure is properly vented as the grill manual or local codes require, and never store a propane cylinder behind a door that is not louvered.\u003c\/p\u003e\u003ch4\u003eGeneral information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWhen used for propane cylinder storage, a louvered door model is required; never place a cylinder under or near the grill without enough ventilation and shielding to keep the regulator and hose from heating.\u003c\/li\u003e\n\u003cli\u003eWhen installing directly below another unit, use only AOG built-in products.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eInstall specifications and BK-1 kit\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCut the opening 14-1\/2\" H x 20-1\/2\" W and orient the unit as the cutout diagram shows.\u003c\/li\u003e\n\u003cli\u003eThe BK-1 kit fits island walls 1-1\/2\" to 2-1\/4\" thick and must be used in all AOG GFRC islands.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMethod A: hook brackets (inside access)\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFrom inside the island, set each bracket over a frame cutout with its flange against the island wall, line the hole up with the oblong slot and drive a short hex screw; do not overtighten.\u003c\/li\u003e\n\u003cli\u003eBrackets are needed only on the top and bottom, or the left and right, cutouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMethod B: long screws (no inside access)\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMark holes on opposite sides of the frame, drill pilot holes, set the frame in the cutout and drive the long hex screws; do not overtighten.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eDoor installation\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSlide the unit fully into the opening so the frame sits flush against the outside wall and fasten through the installation screw slots at the top and bottom.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCare and cleaning\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eClean with grill cleaner or soapy water, wiping with the grain; rinse, dry and finish with a stainless steel cleaner. A copper pad may be used on tough deposits; never steel wool.\u003c\/li\u003e\n\u003cli\u003eNear the ocean, pools or masonry dust, clean at least monthly to prevent surface rust and pitting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBuilding code information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIsland enclosure venting follows the AOG grill manual or local codes; gas grill installations follow the National Fuel Gas Code ANSI Z223.1\/NFPA 54 (\u003ca href=\"https:\/\/www.nfpa.org\/codes-and-standards\/nfpa-54-standard-development\/54\" target=\"_blank\" rel=\"noopener\"\u003eNFPA 54\u003c\/a\u003e); Canada CSA B149.1.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eAOG doors and drawers limited warranty, original purchaser, single-family residential use in the U.S. and Canada, with proof of purchase: SD Series doors and drawers (black slam latch handles) are warranted for one (1) year from the date of purchase. Labor, misuse, improper installation or handling, missing routine maintenance, and normal outdoor rust or discoloration that does not stop the part working are not covered.\u003c\/p\u003e\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.rhpeterson.com\/login\/aoginstructions\/C2-814.pdf\" target=\"_blank\" rel=\"noopener\"\u003e2026 AOG Doors and Drawers Common Instructions (L-C2-814)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/americanoutdoorgrill.com\/wp-content\/uploads\/2026\/02\/AOG_2026_Spec-Guide_Rev-00_Web.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAOG 2026 Spec Guide (cutouts and dimensions)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/americanoutdoorgrill.com\/pdf\/AOG_Product-Catalog_Web.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAOG Product Catalog\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFollow the manufacturer's installation instructions exactly. Improper installation, adjustment, alteration or maintenance can cause fire, property damage or injury. United Fireplaces recommends that every appliance be installed by a qualified professional installer.\u003c\/p\u003e\u003ch3\u003eFrequently asked questions — 14-20-SD\u003c\/h3\u003e\n\u003ch4\u003eWhat size cutout does the 14-20-SD need?\u003c\/h4\u003e\u003cp\u003e14-1\/2\" H x 20-1\/2\" W, in an island wall 1-1\/2\" to 2-1\/4\" thick or an AOG GFRC island.\u003c\/p\u003e\n\u003ch4\u003eHow does it mount?\u003c\/h4\u003e\u003cp\u003eWith the BK-1 kit: hook brackets screwed on from inside the island, or long hex screws through the frame into pilot holes when there is no inside access.\u003c\/p\u003e\n\u003ch4\u003eCan I store a propane tank behind it?\u003c\/h4\u003e\u003cp\u003eNo. AOG requires a louvered door model, such as the 20-14-SDV or the AOG14TR tank tray door, for propane cylinder storage.\u003c\/p\u003e\n\u003ch4\u003eWhat's the warranty?\u003c\/h4\u003e\u003cp\u003eOne year from the date of purchase, the AOG term for SD Series doors with black slam latch handles.\u003c\/p\u003e","brand":"American Outdoor Grills","offers":[{"title":"Default Title","offer_id":50912362758306,"sku":"14-20-SD","price":243.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/5846\/8770\/files\/14-20-sd-1.jpg?v=1795090969","url":"https:\/\/unitedfireplaces.com\/products\/american-outdoor-grill-14x20-horizontal-access-door-14-20-sd","provider":"United Fireplaces","version":"1.0","type":"link"}